Formation of Ultra High Pure Metal Thin Films by Means of a Dry Process
スポンサーリンク
概要
- 論文の詳細を見る
- Japan Institute of Metalsの論文
- 2000-01-20
著者
-
ABIKO Kenji
Institute for Materials Research, Tohoku University
-
Horino Y
Diamond Research Center National Institute Of Advanced Industrial Science And Technology (aist)
-
KINOMURA Atsushi
Osaka National Research Institute, AIST
-
HORINO Yuji
Osaka National Research Institute, AIST
-
HORINO Yuji
National Institute of Advanced Industrial Science and Technology
-
TSUBOUCHI Nobuteru
Laboratory of Purified Materials, National Institute of Advanced Industrial Science and Technology
-
CHAYAHARA Akiyoshi
Laboratory of Purified Materials, National Institute of Advanced Industrial Science and Technology
-
KINOMURA Atsushi
National Institute of Advanced Industrial Science and Technology
-
TSUBOUCHI Nobuteru
Osaka National Research Institute
-
CHAYAHARA Akiyoshi
Osaka National Research Institute
-
HECK Claire
Osaka National Research Institute
-
Horiba Yasutaka
System Lsi Laboratory Mitsubishi Electric Corporation
-
CHAYAHARA Akiyoshi
AIST Kansai
-
Chayahara Akiyoshi
Department Of Electrical Engineering Hiroshima University
-
Chayahara Akiyoshi
Government Industrial Research Institute Osaka
-
Heck Claire
National Institute Of Advanced Industrial Science And Technology Aist Kansai Laboratory Of Purified
-
Abiko Kenji
Institute For Materials Research Tohoku University
-
Hirano Y
Advanced Device Development Dept. Renesas Technology Corp.
-
Horino Yuji
National Inst. Of Advanced Industrial Sci. And Technol. Kansai Osaka Jpn
-
Kinomura A
National Institute Of Advanced Industrial Science And Technology
-
Tsubouchi Nobuteru
Laboratory Of Purified Materials National Institute Of Advanced Industrial Science And Technology
関連論文
- Chemical Form of Precipitate by Coprecipitation with Palladium for Separation of Trace Elements in High-Purity Metals
- Determination of Trace Element Quantities in Ultra High-Purity Iron by Spectrochemical Analysis after Chemical Separation
- Determination of Trace Amounts of Sulfur in High-Purity Iron by Infrared Absorption after Combustion: Removal of Sulfur Blank
- Model of reactive microwave plasma discharge for growth of single-crystal diamond (Special issue: Advanced plasma science and its applications for nitrides and nanomaterials)
- Direct Measurement of Transient Drain Currents in Partially-Depleted SOI N-Channel MOSFETs Using a Nuclear Microprobe for Highly Reliable Device Designs
- A Sub 1-V L-Band Low Noise Amplifier SOI CMOS(Special Section on Analog Circuit Techniques and Related Topics)
- A CAD-Compatible SOI-CMOS Gate Array Using 0.35 μm Partially-Depleted Transistors (Special Issue on Low-Power High-Speed CMOS LSI Technologies)
- Analyses of the Radiation-Caused Characteristics Change in SOI MOSFETs Using Field Shield Isolation
- Suppression of Self-Heating in Hybrid Trench Isolated SOI MOSFETs with Poly-Si plug and W plug
- A Single-Chip MPEG-2 422P@ML Video, Audio, and System Encoder with a 162MHz Media-processor Core and Dual Motion Estimation Cores
- An Embedded Software Scheme for a Real-Time Single-Chip MPEG-2 Encoder System with a VLIW Media Processor Core (Special Issue on Low-Power High-Performance VLSI Processors and Technologies)
- Formation of Mono-Layer Honeycomb Structure in High-Purity Iron by Single Pass Hot-rolling
- Formation of Giant Columnar Grains in High-Purity Iron by Hot-Rolling
- A Design of High-Speed 4-2 Compressor for Fast Multiplier (Special Issue on Ultra-High-Speed LSIs)
- Proton Nuclear Magnetic Resonance Studies on Structural Changes Induced by Annealing of Hydrogenated Amorphous Silicon Films Prepared at High Deposition-Rate
- Effect of Annealing on Photoinduced Absorption in Amorphous Silicon Films Prepared at High Deposition Rates
- Annealing Effect on Hydrogenated Amorphous Silicon Films Prepared at High Deposition-Rate by Substrate Impedance Tuning Technique
- Effect of Annealing on Hydrogenated Amorphous Silicon Prepared at High Deposition Rate
- Well Structure by High-Energy Boron Implantation for Soft-Error Reduction in Dynamic Random Access Memories (DRAMs)
- Estimation of Carrier Suppression by High-Energy Boron-Implanted Layer for Soft Error Reduction
- High-Dose Implantation of MeV Carbon Ion into Silicon
- Three-Dimensional Analysis of Locally Implanted Atoms by MeV Helium Ion Microprobe
- Au^+-Ion-Implanted Silica Glass with Non-Linear Optical Property
- Etching Rate Control by MeV O^+ Implantation for Laser-Chemical Reaction of Ferrite : Beam-Induced Physics and Chemistry
- Microbeam Line of MeV Heavy Ions for Materials Modification and In-Situ Analysis : Beam-Induced Physics and Chemistry
- Local Control of Magnetic Property in Stainless Steel Surface by Ion and Laser Beams : Beam-Induced Physics and Chemistry
- Microbeam Line of MeV Heavy Ions for Materials Modification and In-Situ Analysis
- Local Control of Magnetic Property in Stainless Steel Surface by Ion and Laser Beams
- Etching Rate Control by MeV O^+ Implantation for Laser-Chemical Reaction of Ferrite
- Preferentially Oriented Crystal Growth in Dynamic Mixing Process : An Approach by Monte Carlo Simulation
- Focused High-Energy Heavy Ion Beams
- Surface Structure of Ion-Implanted Silica Glass
- Tomography of Microstructures by Scanning Micro-RBS Probe
- Optimization in Spot Sizes of Focused MeV Ion Beam by Precise Adjustment of Lens-Current Excitations : Nuclear Science, Plasmas and Electric Discharges
- Microstructural Evolution of Fe-Cr-W Model Alloys During Fe^+ Ion Irradiation
- Qualitative Correspondences of Experimentally Obtained Growth Rates and Morphology of Single-Crystal Diamond with Numerical Predictions of Plasma and Gas Dynamics in Microwave Discharges for Various Substrate Holder Shapes
- 23-O-16 Hardness of DLC Deposited by Plasma Based Ion Implantation and Deposition Method Using Mixed RF and Negative High Voltage Pulses
- Fe Deposition or Implantation into Vacuum Arc Deposited Cr Films
- Ion-Beam 3C-SiC Heteroepitaxy on Si
- Neutron Activation Analysis of Ultrahigh-Purity Ti-Al Alloys in Comparison with Glow-Discharge Mass Spectrometry
- Epitaxial Growth of Pure ^Si Thin Films Using Isotopically Purified Ion Beams : Semiconductors
- Neutron Activation Analysis of High-Purity Iron in Comparison with Chemical Analysis
- Silicon Carbide Film Growth Using Dual Isotopical ^Si^- and ^C^+ Ion species
- Formation of High Purity films by Negative Ion Beam Sputtering Using an Ultra-high Vacuum Self-Sputtering Method
- Formation of Ultra High Pure Metal Thin Films by Means of a Dry Process
- Macroparticle-Free Ti-Al Films by Newly Developed Coaxial Vacuum Arc Deposition
- Formation of Crystalline SiC Buried Layer by High-Dose Implantation of MeV Carbon Ions at High Temperature
- Annealing of Se^+-Implanted GaAs Encapsulated with As-Doped a-Si:H
- Chemical State and Refractive Index of Mg-Ion-Implanted Silica Glass
- Parameter Dependence of Stable State of Densely Contact-Electrified Electrons on Thin Silicon Oxide
- Impact of Body Bias Controlling in Partially Depleted SOI Devices with Hybrid Trench Isolation Technology
- A 90nm-node SOI Technology for RF Applications
- 23-P-06 Nano Crystalline and Smooth Surface Epilayer Formations of 3C-SiC at Low Temperatures Using Energetic Ions
- New Semiconductor GaNAsBi Alloy Grown by Molecular Beam Epitaxy
- PREFACE
- Two-Phase Structure of a-Si_N_x:H Fabricated by Microwave Glow-Discharge Technique
- Reflectance spectra of BN Materials in the Vacuum Ultraviolet
- Role of Hydrogen in Improvement of the Critical Temperature of Ceramic YBa_2Cu_3O_ by Proton Implantation
- A Single-Chip 2.4-GHz RF Transceiver LSI with a Wide-Input-Range Frequency Discriminator(Special Issue on Silicon RF Device & Integrated Circuit Technologies)
- Effects of Various Alloying Elements on Tensile Properties of High-Purity Fe-18Cr-(14-16)Ni Alloys at Room Temperature
- In situ Transmission Electron Microscopy of Carbide Precipitation in Fe-50% Cr Alloys at Elevated Temperatures
- Diffusion of Cr and Fe in a High-Purity Fe-50mass%Cr-8mass%W Alloy
- Self-Diffusion in High Purity Fe-50 mass% Cr Alloy
- PREFACE
- Fabrication of 1 Inch Mosaic Crystal Diamond Wafers
- Dense Structure of SiN_x Films Fabricated by Radical Beam Deposition Method Using Hexamethyldisilazane
- Metastable GaAsBi Alloy Grown by Molecular Beam Epitaxy
- Metallic Alloy Coatings Using Coaxial Vacuum Arc Deposition
- Diffusivities and Activities of S Implanted into GaAs through an As-doped a-Si:H Film
- Time Dependent Dielectric Breakdown of Thin Silicon Oxide Using Dense Contact Electrification
- Time Evolution of Contact-Electrified Electron Dissipation on Silicon Oxide Surface Investigated Using Noncontact Atomic Force Microscope
- Spatial Distributions of Densely Contact-Electrified Charges on a Thin Silicon Oxide
- Quick Focus Adjustment for Quadrupole Lens System to Form High-Energy Ion Microbeam
- Function of Substrate Bias Potential for Formation of Cubic Boron Nitride Films in Plasma CVD Technique
- A 10 bit 50 MS/s CMOS D/A Converter with 2.7 V Power Supply (Special Section on Low-Power and Low-Voltage Integrated Circuits)
- Transient Analysis of Switched Current Source
- Effects of Neutron Irradiation on Tensile Properties in High-Purity Fe-(9-50) Cr and Fe-50Cr-xW Alloys
- Spatial Distribution and Its Phase Transition of Densely Contact-Electrified Electrons on a Thin Silicon Oxide
- Stable-Unstable Phase Transition of Densely Contract-Electrified Electrons on Thin Silicon Oxide
- Spectrophotometric Determination of Trace Amounts of Boron in High-Purity Iron and Ferroalloy after Chemical Separation
- Determination of Trace Amounts of Carbon in High-Purity Iron by Infrared Absorption after Combustion: Pretreatment of Reaction Accelerator and Ceramic Crucible
- Formation of Polycrystalline SiC in ECR Plasma
- Damage Structures and Mechanical Properties of High-Purity Fe-9Cr Alloys Irradiated by Neutrons
- Ultra-Purification of Electrolytic Iron by Cold-Crucible Induction Melting and Induction-Heating Floating-Zone Melting in Ultra-High Vacuum
- Mechanical Properties of Ultrahigh-Purity Ti-45mol%Al Alloy
- Effect of Tungsten on Mechanical Properties of High-Purity 60mass%Cr-Fe Alloys
- Influence of Purity and Cooling-Rate on the Microstructure of Hot-Forged Pure Irons
- Mechanical Properties of a High-Purity 60 Mass% Cr-Fe Alloy
- High-Temperature Mechanical Properties of a High-Purity Cr-Ni Alloy
- Influence of Purity and Forging Temperature on the Microstructure of High-Purity Iron
- Effect of Aging on the Tensile Properties of High-Purity Fe-50Cr Alloys
- Effect of Grain Size on the Deformation Properties of a High-Purity Fe-50Cr Alloy at 293 and 773K
- Role of Tungsten in the Mechanical Properties of a High-Purity Fe-50mass% Cr Alloy at 293-773K
- Purification of Ti-Al Alloys by Induction-Heating Floating-Zone melting and Cold-Crucible melting in Ultra-High Vacuum
- Positron Trapping Sites Originating from Oxide Interfaces on 4H-SiC C($000\bar{1}$)- and Si(0001)-Faces
- New Semiconductor GaNAsBi Alloy Grown by Molecular Beam Epitaxy
- New III–V Semiconductor InGaAsBi Alloy Grown by Molecular Beam Epitaxy
- Metastable GaAsBi Alloy Grown by Molecular Beam Epitaxy
- Fe Deposition or Implantation into Vacuum Arc Deposited Cr Films
- Dense Structure of SiNx Films Fabricated by Radical Beam Deposition Method Using Hexamethyldisilazane