PREFACE
スポンサーリンク
概要
- 論文の詳細を見る
- Japan Institute of Metalsの論文
- 2000-01-20
著者
-
ABIKO Kenji
Institute for Materials Research, Tohoku University
-
Hino Mitsutaka
Department of Metallurgy, Graduate School of Engineering, Tohoku University
-
Hino Mitsutaka
Department Of Metallurgy Faculty Of Engineering Tohoku University
-
Hino Mitsutaka
Department Of Metallurgy Graduate School Of Engineering Tohoku Universtiy
-
IIJIMA Yoshiaki
Department of materials Science, Graduate School of Engineering, Tohoku University
-
HISHINUMA Akimichi
Department of Materials Science, Tokai Research Establishment, JAERI
-
Abiko Kenji
Institute For Materials Research Tohoku University
-
Hishinuma Akimichi
Department Of Materials Science Tokai Research Establishment Jaeri
-
Iijima Yoshiaki
Department Of Materials Science Graduate School Of Engineering Tohoku University
関連論文
- Chemical Form of Precipitate by Coprecipitation with Palladium for Separation of Trace Elements in High-Purity Metals
- Determination of Trace Element Quantities in Ultra High-Purity Iron by Spectrochemical Analysis after Chemical Separation
- Determination of Trace Amounts of Sulfur in High-Purity Iron by Infrared Absorption after Combustion: Removal of Sulfur Blank
- The Coordination of F Ions around Al and Ca Ions in Molten Aluminosilicate Systems
- The Role of Ca and Na Ions in the Effect of F Ion on Silicate Polymerization in Molten Silicate System
- The Estimation of the Iso-viscosity Lines in Molten CaF2–CaO–SiO2 System
- Measuring Strains for Hematite Phase in Sinter by Electron Backscattering Diffraction Method
- Formation of Mono-Layer Honeycomb Structure in High-Purity Iron by Single Pass Hot-rolling
- Formation of Giant Columnar Grains in High-Purity Iron by Hot-Rolling
- Numerical Analysis on Si Deoxidation of Molten Fe, Ni, Fe-Ni, Fe-Cr, Fe-Cr-Ni, Ni-Cu and Ni-Co Alloys by Quadratic Formalism
- Numerical Analysis on Si Deoxidation of Molten Fe-Ni and Ni-Co Alloys by Quadratic Formalism
- Microstructural Evolution of Fe-Cr-W Model Alloys During Fe^+ Ion Irradiation
- Neutron Activation Analysis of Ultrahigh-Purity Ti-Al Alloys in Comparison with Glow-Discharge Mass Spectrometry
- Neutron Activation Analysis of High-Purity Iron in Comparison with Chemical Analysis
- Formation of Ultra High Pure Metal Thin Films by Means of a Dry Process
- Phase Equilibria of Two-liquid CaO-MgO-Fe_tO-P_2O_5 Slag Saturated with (Mg, Fe)O
- Equilibrium Relation of Two Liquid CaO-MgO-Fe_tO-P_2O_5 Slag Phases Saturated with (Mg,Fe)O
- Deoxidation Equilibrium of Cr-Ni Stainless Steel with Si at the Temperatures from 1823 to 1923 K
- Deoxidation Equilibrium of Chromium Stainless Steel with Si at the Temperatures from 1823 to 1923K
- Viscosity of Liquid Fe-Cu-Si Alloy Formed in New Melting Process for Domestic Waste Incineration Residue
- Equilibrium between Dissolved Chromium and Oxygen in Liquid High Chromium Alloyed Steel Saturated with pure Cr_2O_3
- Elution Mechanism of Fluorine form Steelmaking Slag into Seawater
- Dissolution Behavior of Environmentally Regulated Elements from Steelmaking Slag into Seawater
- Dissolution Behavior of Nutrition Elements from Steelmaking Slag into Seawater
- Activity Measurement of the Constituents in Molten Sn-Mg-Zn-Ternary Lead Free Solder Alloys by Mass Spectrometry
- Activity Measurement of Silicon in Molten Cu-Si Binary Alloy
- Activity Measurement of the Constituents in Molten Ag-In-Sn Ternary Alloy by Mass Spectrometry
- Thermodynamics of the Deoxidation Equilibrium of Aluminum in Liquid Nickel and Nickel-Iron Alloys
- PREFACE
- Activities of the Constituents in Spinel Splid Solution and Free Energies of Formation of MgO, MgO.Al_2O_3
- Hydrogenation and Dehydrogenation Behavior of LaNi_Co_x (x=0, 0.25, 2) Alloys Studied by Pressure Differential Scanning Calorimetry
- Self-Diffusion along Dislocations in Ultra High Purity Iron
- Aluminum Deoxidation Equilibrium of Molten Fe-Ni Alloy Coexisting with Alumina or Hercynite
- Magnesium Deoxidation Equilibrium of Molten Fe-Ni Alloy Expressed by Quadratic Formalism and Redlich-Kister Type Polynomial
- Phosphorus Gasification from Sewage Sludge during Carbothermic Reduction
- Ti Deoxidation Equilibrium in Molten Fe-Ni Alloys at Temperatures between 1823 to 1923K
- The Coordination of F Ions around Al and Ca Ions in Molten Aluminosilicate Systems
- The Role of Ca and Na Ions in the Effect of F Ion on Silicate Polymerization in Molten Silicate System
- The Estimation of the Iso-viscosity Lines in Molten CaF_2-CaO-SiO_2 System
- Identification of Titanium Oxide Phases Equilibrated with Liquid Fe-Ti Alloy Based on EBSD Analysis
- Temperature Dependence of Ti Deoxidation Equilibria of Liquid Iron in Coexistence with 'Ti_3O_5' and Ti_2O_3
- Effects of Various Alloying Elements on Tensile Properties of High-Purity Fe-18Cr-(14-16)Ni Alloys at Room Temperature
- In situ Transmission Electron Microscopy of Carbide Precipitation in Fe-50% Cr Alloys at Elevated Temperatures
- Diffusion of Cr and Fe in a High-Purity Fe-50mass%Cr-8mass%W Alloy
- Self-Diffusion in High Purity Fe-50 mass% Cr Alloy
- PREFACE
- Agglomeration Simulation of Chain-like Inclusions in Molten Steel Based on Fractal Cluster-Cluster Agglomeration Model
- Phase Equilibria and Thermodynamics of FeO・Cr_2O_3-MgO・Cr_2O_3-MgO・Al_2O_3 Spinel Structure Solid Solution Saturated with (Cr, Al)_2O_3
- Comments on "Evaluation of Thermodynamic Activity of Metallic Oxide in a Ternary Slag from the Sulphide Capacity of the Slag"
- Activity Measurement of the Constituents in Liquid Cu-Al Alloy with Mass-Spectrometry
- Kinetic Study on Recovery of Antimony in Anode Slime from Used Lead Batteries Utilizing Volatile Oxide Formation
- Numerical Analysis on Si Deoxidation of Molten Ni and Ni-Cu Alloy by Quadratic Formalism
- Effects of Neutron Irradiation on Tensile Properties in High-Purity Fe-(9-50) Cr and Fe-50Cr-xW Alloys
- Rippled Pattern of Image in HVEM Irradiated Nickel
- Diffusion of niobium in α-iron
- Growth Kinetics of β-Ti Solid Solution in Reaction Diffusion
- Interdiffusion in B2 Type Intermetallic Compound FeAl under High Pressures
- Hydrogenation and Dehydrogenation Behavior of LaNi_Al_x, (x=0-0.5) Alloys Studied by Pressure Differential Scanning Calorimetry
- Giant Magnetic Entropy Change in Hydrogenated La(Fe_Si_)_H_y Compounds
- Diffusion of Aluminum in β-Titanium
- Low Temperature Grain Boundary Diffusion of Chromium in SUS316 and 316L Stainless Steels
- Spectrophotometric Determination of Trace Amounts of Boron in High-Purity Iron and Ferroalloy after Chemical Separation
- Determination of Trace Amounts of Carbon in High-Purity Iron by Infrared Absorption after Combustion: Pretreatment of Reaction Accelerator and Ceramic Crucible
- Damage Structures and Mechanical Properties of High-Purity Fe-9Cr Alloys Irradiated by Neutrons
- Ultra-Purification of Electrolytic Iron by Cold-Crucible Induction Melting and Induction-Heating Floating-Zone Melting in Ultra-High Vacuum
- Mechanical Properties of Ultrahigh-Purity Ti-45mol%Al Alloy
- Effect of Tungsten on Mechanical Properties of High-Purity 60mass%Cr-Fe Alloys
- Influence of Purity and Cooling-Rate on the Microstructure of Hot-Forged Pure Irons
- Mechanical Properties of a High-Purity 60 Mass% Cr-Fe Alloy
- High-Temperature Mechanical Properties of a High-Purity Cr-Ni Alloy
- Influence of Purity and Forging Temperature on the Microstructure of High-Purity Iron
- Effect of Aging on the Tensile Properties of High-Purity Fe-50Cr Alloys
- Effect of Grain Size on the Deformation Properties of a High-Purity Fe-50Cr Alloy at 293 and 773K
- Role of Tungsten in the Mechanical Properties of a High-Purity Fe-50mass% Cr Alloy at 293-773K
- Purification of Ti-Al Alloys by Induction-Heating Floating-Zone melting and Cold-Crucible melting in Ultra-High Vacuum
- Volume and Grain Boundary Diffusion of Chromium in Ni-Base Ni-Cr-Fe Alloys
- Determination of Trace Amount of Gaseous Elements in Iron and Steel
- In-situ Observation of Transformation Behavior in High-Purity Fe-Ni Alloys
- Purification of Cobalt, Nickel, and Titanium by Cold-Crucible Induction Melting in Ultrahigh Vacuum
- Role of Carbon and Nitrogen on the Transformation of the σ Phase in Highly Purified Fe-50 mass% Cr Alloys
- Why Do We Study Ultra-High Purity Base Metals?
- Estimation of Water Vapor Solubility in Molten Silicates by Quadratic Formalism Based on the Regular Solution Model.
- Evaporation Rate of Zinc in Liquid Iron.