Determination of Trace Amounts of Carbon in High-Purity Iron by Infrared Absorption after Combustion: Pretreatment of Reaction Accelerator and Ceramic Crucible
スポンサーリンク
概要
- 論文の詳細を見る
- Japan Institute of Metalsの論文
- 2000-01-20
著者
-
Takada Kunio
Institute For Materials Research Tohoku University
-
MORIMOTO Yukitoshi
Nanometal Analyst Corp.
-
MORIMOTO Yukitoshi
Japan Analyst Corp.
-
YASUHARA Hisao
Technical Research Lab., Kawasaki Steel Corp.
-
KUROSAKI Mayuko
Japan Energy Analytical Research Center Co. Ltd.
-
Abiko Kenji
Institute For Materials Research Tohoku University
-
Ashino T
Tohoku Univ. Sendai Jpn
-
Takada K
Tohoku Univ. Sendai Jpn
-
Yasuhara H
Technical Research Lab. Kawasaki Steel Corp.
-
Ashino Tetsuya
Institute For Material Research Tohoku University
-
Morimoto Y
Nanometal Analyst Corp.
関連論文
- Chemical Form of Precipitate by Coprecipitation with Palladium for Separation of Trace Elements in High-Purity Metals
- Determination of Trace Element Quantities in Ultra High-Purity Iron by Spectrochemical Analysis after Chemical Separation
- Determination of Trace Amounts of Sulfur in High-Purity Iron by Infrared Absorption after Combustion: Removal of Sulfur Blank
- Formation of Mono-Layer Honeycomb Structure in High-Purity Iron by Single Pass Hot-rolling
- Formation of Giant Columnar Grains in High-Purity Iron by Hot-Rolling
- Microstructural Evolution of Fe-Cr-W Model Alloys During Fe^+ Ion Irradiation
- Neutron Activation Analysis of Ultrahigh-Purity Ti-Al Alloys in Comparison with Glow-Discharge Mass Spectrometry
- Neutron Activation Analysis of High-Purity Iron in Comparison with Chemical Analysis
- Formation of Ultra High Pure Metal Thin Films by Means of a Dry Process
- Quantitative Evaluation of Calcium Phosphate on Surface of Titanium by X-ray Fluorescence Analysis
- Calcium-Phosphate Formation on Titanium Modified with Newly Developed Calcium-Hydroxide-Slurry Treatment
- PREFACE
- In situ Transmission Electron Microscopy of Carbide Precipitation in Fe-50% Cr Alloys at Elevated Temperatures
- Diffusion of Cr and Fe in a High-Purity Fe-50mass%Cr-8mass%W Alloy
- Self-Diffusion in High Purity Fe-50 mass% Cr Alloy
- Trace Analysis of Released Metallic Ions in Static Immersion Test for Characterization of Metallic Biomaterials
- PREFACE
- Development of an Automatic Analyzer for a Mixed Nitric Acid, Hydrofluoric Acid, and Iron Ion in the Pickling Process
- Formation of Refractory WC Compound by Mechanical Solid State Reduction
- Comparative Measurement of Gas Temperature in a Graphite Atomizer by a Two-line Method of Iron and Nickel Spectral Lines in Graphite Furnace Atomic Absorption Spectrometry
- Degradation Process of Graphite Furnace Estimated from the Atomic Gas Temperature of Iron in Graphite Furnace Atomic Absorption Spectrometry
- Role of a Binary Metallic Modifier in the Determination of Cadmium in Graphite Furnace Atomic Absorption Spectrometry
- Temporal Variation in Gas Temperature at the Atomization Stage in Several Types of Graphite Furnaces for Atomic Absorption Spectrometry
- Temporal Variations in Gas Temperature in an Atomization Stage of Cadmium and Tellurium Evaluated by Using the Two-line Method in Graphite Furnace Atomic Absorption Spectrometry
- Effects of Neutron Irradiation on Tensile Properties in High-Purity Fe-(9-50) Cr and Fe-50Cr-xW Alloys
- Spectrophotometric Determination of Trace Amounts of Boron in High-Purity Iron and Ferroalloy after Chemical Separation
- Development of a Nitrogen Atmosphere Pretreatment Chamber for the Determination of Trace Amounts of Carbon in High-Purity Iron by the Infrared Absorption Method after Combustion in an Electric Resistance Furnace
- Determination of Trace Amounts of Carbon in High-Purity Iron by Infrared Absorption after Combustion: Pretreatment of Reaction Accelerator and Ceramic Crucible
- Determination of Pb, Ag, Cu and Mn in Steel by Electrothermal-Atom ic Absorption Spectrometry with Direct Atomization of a Solid Sample
- Determination of Pb, Ag, Cu and Mn in Steel by Electrothermal-Atomic Absorption Spectrometry with Direct Atomization of a Solid Sample, and Shapes of Absorption Signals Based on Atomization Process of the Elements
- Ultra-Purification of Electrolytic Iron by Cold-Crucible Induction Melting and Induction-Heating Floating-Zone Melting in Ultra-High Vacuum
- Mechanical Properties of Ultrahigh-Purity Ti-45mol%Al Alloy
- Effect of Tungsten on Mechanical Properties of High-Purity 60mass%Cr-Fe Alloys
- Influence of Purity and Cooling-Rate on the Microstructure of Hot-Forged Pure Irons
- Mechanical Properties of a High-Purity 60 Mass% Cr-Fe Alloy
- High-Temperature Mechanical Properties of a High-Purity Cr-Ni Alloy
- Influence of Purity and Forging Temperature on the Microstructure of High-Purity Iron
- New Convenient Dissolution of Iron-Rhodium Alloys Using Hydrochloric Acid Containing a Small Amount of Nitric Acid without Heating for an ICP-AES Analysis
- Effect of Aging on the Tensile Properties of High-Purity Fe-50Cr Alloys
- Effect of Grain Size on the Deformation Properties of a High-Purity Fe-50Cr Alloy at 293 and 773K
- Role of Tungsten in the Mechanical Properties of a High-Purity Fe-50mass% Cr Alloy at 293-773K
- Purification of Ti-Al Alloys by Induction-Heating Floating-Zone melting and Cold-Crucible melting in Ultra-High Vacuum
- Silicon Contamination Adsorbed on Pure Titanium Plate during Soaking Test in Hanks' Balanced Saline Solution
- Determination of Trace Amount of Gaseous Elements in Iron and Steel
- In-situ Observation of Transformation Behavior in High-Purity Fe-Ni Alloys
- Purification of Cobalt, Nickel, and Titanium by Cold-Crucible Induction Melting in Ultrahigh Vacuum
- Determination of Cadmium in High-Purity Zinc by Electrothermal Atomic Absorption Spectrometry after Coprecipitation with Iron(III) Hydroxide
- Solubility of Calcium and Oxygen in Molten Iron Equilibrated with Slag in CaO, Al_2O_3 or CaO-stabilized ZrO_2 Crucible at 1873K
- Role of Carbon and Nitrogen on the Transformation of the σ Phase in Highly Purified Fe-50 mass% Cr Alloys
- Why Do We Study Ultra-High Purity Base Metals?