Electric Field Induced Reflection in GaInAsP/InP MQW Structure
スポンサーリンク
概要
- 論文の詳細を見る
- 社団法人応用物理学会の論文
- 1987-08-20
著者
-
Ravikumar K.g.
Department Of Physical Electronics Tokyo Institute Of Technology
-
Ravikumar K.g.
The Advanced Tech. R&d Center Fujikura Ltd.
-
Ravikumar K.
Department Of Physical Electronics Tokyo Institute Of Technology
-
ARAI Shigehisa
Research Center for Quantum Effect Electronics, Tokyo Institute of Technology
-
Arai S
Research Center For Quantum Effect Electronics Tokyo Institute Of Technology
-
Arai Shigehisa
Department Of Physical Electronics Tokyo Institute Of Technology
-
Arai Shigehisa
Faculty Of Engineering Tokyo Institute Of Technology
-
IZUMI Akira
Japan Advanced Institute of Science and Technology (JAIST)
-
Arai Shigehisa
Department Of Electrical And Electronics Engineering Tokyo Institute Of Technology
-
SUEMATSU Yasuharu
Department of Physical Electronics, Tokyo Institute of Technology
-
KIKUGAWA Tomoyuki
Anritsu Co.
-
SHIMOMURA Kazuhiko
Department of Physical Electronics, Tokyo Institute of Technology
-
IZUMI Akira
Department of Physical Electronics, Tokyo Institute of Technology
-
OHKI Yoshimasa
Department of Physical Electronics, Tokyo Institute of Technology
-
Suematsu Yasuharu
Department Of Electronic Engineering Kohgakuin University
-
OHKI Yoshio
NTT Advanced Technology Corporation
-
Ohki Y
Matsushita Electric Industrial Co. Ltd. Osaka Jpn
-
Izumi A
School Of Materials Science Japan Advanced Institute Of Science And Technology (jaist)
-
Izumi Akira
Department Of Anatomy Iwate Medical University School Of Medicine
-
Shimomura K
Department Of Electrical And Electronic Engineering Sophia University
-
Shimomura Kazuhiko
Department Of Electrical And Electronic Engineering Sophia Universiry
-
ARAI Shigehisa
Department of Electrical and Electronic Engineering, Tokyo Institute of Technology
関連論文
- High-Reflectivity Semiconductor/Benzocyclobutene Bragg Reflector Mirrors for GaInAsP/InP Lasers
- Highly Uniform 1.5 μm Wavelength Deeply Etched Semiconductor/Benzocyclobutene Distributed Bragg Reflector Lasers
- Theoretical Analysis of GaInAsP/InP Multiple Micro-Cavity Laser
- Continuous Wave Operation of 1.55 μm GaInAsP/InP Laser with Semiconductor/Benzocyclobutene Distributed Bragg Reflector
- Multiple Micro-Cavity Laser with Benzocyclobutene/Semiconductor High Reflective Mirrors Fabricated by CH_4/H_2-Reactive Ion Etching
- GaInAsP/InP Multiple Short Cavity Laser with λ/4-Air Gap/Semiconductor Bragg Reflectors
- GaInAsP/InP Partially Strain-Compensated Multiple-Quantum-Wire Lasers Fabricated by Dry Etching and Regrowth Processes
- GaInAsP/InP Long Wavelength Quantum-Wire Lasers
- [Invited]GaInAsP/InP Long Wavelength Quantum-Wire Lasers
- Room Temperature-Copntinuous Wave Operation of GaInAsP/InP Multiple-Quantum-Wire Lasers by Dry Etching and Regrowth Method
- Reliable Operation of GaInAsP/InP Distributed Feedback Laser with Wirelike Active Regions
- Distributed Reflector Lasers with First-Order Vertical Grating and Second-Order Bragg Reflectors
- GaInAsP/InP Distributed Reflector Lasers Consisting of Deeply Etched Vertical Gratings : Optics and Quantum Electronics
- 1.5-μm-Wavelength Distributed Feedback Lasers With Deeply Etched First-Order Vertical Grating : Optics and Quantum Electronics
- Deeply Etched Semiconductor/Benzocyclobutene Distributed Bragg Reflector Laser Combined with Multiple Cavities for 1.5-μm-Wavelength Single-Mode Operation
- Improvement of Deposition Rate by Sandblasting of Tungsten Wire in Catalytic Chemical Vapor Deposition
- Moisture-Resistive Properties of SiN_x Films Prepared by Catalytic Chemical Vapor Deposition below 100℃ for Flexible Organic Light-Emitting Diode Displays
- Effect of Atomic Hydrogen on Preparation of Highly Moisture-Resistive SiN_x Films at Low Substrate Temperatures
- Highly Moisture-Resistive SiN_x Films Prepared by Catalytic Chemical Vapor Deposition
- Low-Resistivity Phosphorus-Doped Polycrystalline Silicon Thin Films Formed by Catalytic Chemical Vapor Deposition and Successive Rapid Thermal Annealing
- Catalytic Chemical Sputtering: A Novel Method for Obtaining Large-Grain Polycrystalline Silicon : Surfaces, Interfaces, and Films
- Control of Polycrystalline Silicon Structure by the Two-Step Deposition Method
- Low-Damage GaInAs(P)/InP Nanometer Structure by Low-Pressure ECR-RIBE
- Electric Field Induced Reflection in GaInAsP/InP MQW Structure
- Electric Field-Induced Absorption in GaInAsP/InP MQW Structures Grown by LPE
- Taper-Shape Dependence of Tapered-Waveguide Traveling Wave Semiconductor Laser Amplifier (TTW-SLA)
- Analysis of Leading Edge/Trailing Edge Independent Detection Method in Optical Disk : High Density Recording
- Analysis of Leading Edge/Trailing Edge Independent Detection Method in Optical Disk
- Distributed Reflector Laser Integrated with Active and Passive Grating Sections Using Lateral Quantum Confinement Effect
- Multiple-Quantum-Wire Structures with Good Size Uniformity Fabricated by CH_4/H_2 Dry Etching and Organometallic Vapor-Phase-Epitaxial Regrowth
- GaInAsP/InP Strain-Compensated Quantum-Wire Lasers Fabricated by CH_4/H_2 Dry Etching and Organometallic Vapor-Phase-Epitaxial RegroWth : Optics and Quantum Electronics
- Distributed Reflector Laser with Wirelike Active Regions for Asymmetric Output Property (Short Note)
- Low Threshold Current Density Operation of GaInAsP/InP Lasers with Strain-Compensated Multiple-Layered Wirelike Active Regions
- GaInAsP/InP Multiple-Layered Quantum-Wire Lasers Fabricated by CH_4/H_2 Reactive-Ion Etching
- Characterization of Etching Damage in Cl_2/H_2-Reactive-Ion-Etching of GaInAs/InP Heterostructure
- Low Threshold GaInAsP/InP Distributed Feedback Lasers with Periodic Wire Active Regions Fabricated by CH_4/H_2 Reactive Ion Etching
- Evaluation of Optical Gain Properties of GaInAsP/InP Compressively Strained Quantum-Wire Lasers
- GaInAsP/InP Multiple-Layered Quantum-Wire Lasers Fabricated by CH_4/H_2-Reactive-Ion-Etching
- Temperature Dependence of Internal Quantum Efficiency of 20-nm-Wide GaInAsP/InP Compressively-Strained Quantum-Wire Lasers
- Sidewall Recombination Velocity in GaInAsP/InP Quantum-Well Lasers with Wire-like Active Region Fabricated by Wet-Chemical Etching and Organo-Metallic Vapor-Phase-Epitaxial Regrowth
- Gain Spectrum Measurement of GaInAsP/InP Compressively-Strained Quantum-Wire Lasers
- Fabrication of GaInAs/InP Quantum Wires by Organometallic-Vapor-Phase-Epitaxial (OMVPE) Selective Growth on Grooved Side Walls of Ultrafine Multilayers
- A New-Type 1.5 〜 1.6 μm GaInAsP/InP BIG-DBR Laser by an Island-Type Mesa Process
- Light Emission from Quantum-Box Structure by Current Injection
- Spontaneous Recombination, Gain and Refractive Index Variation for 1.6 μm Wavelength InGaAsP/InP Lasers
- The Temperature Dependence of the Efficiency and Threshold Current of In_Ga_xAs_yP__ Lasers Related to Intervalence Band Absorption
- 1.5-1.6 μm Wavelength (100) GaInAsP/InP DH Lasers : B-3: LASER
- Room Temperature CW Operation of GaInAsP/InP DH Laser Emitting at 1.51 μm
- Low Threshold Current Density (100) GaInAsP/InP Double-Heterostructure Lasers for Wavelength 1.3 μm
- 1.67 μm Ga_In_As/InP DH Lasers Double Cladded with InP by LPE Technique
- Conditions of LPE Growth for Lattice Matched GaInAsP/InP DH Lasers with(100)Substrate in the Range of 1.2-1.5 μm
- Ga_xIn_As_yP_-InP Injection Laser Partially Loaded with Distributed Bragg Reflector
- Intraband Relaxation Time in Compressive-Strained Quantum-Well Lasers
- Twin-Guide Laser with Narrow Radiation Angle
- Monolithic Integration of Laser and Amplifier/Detector by Twin-Guide Structure
- Estimation of Sidewall Nonradiative Recombination in GaInAsP/InP Wire Structures Fabricated by Low Energy Electron-Cyclotron-Resonance Reactive-Ion-Beam-Etching
- Growth and Characterization of ZnCdSe/BeZnTeII-VI Compound Type-II Superlattices on InP Substrates and Their Application for Visible Light Emitting Devices : Semiconductors
- Growth and Characterization of Nitrogen-Doped MgSe/ZnSeTe Superlattice Quasi-Quaternary Oil InP Substrates and Fabrication of Light Emitting Diodes
- Crystal Growth and Characterization of II-VI Compound Light Emitting Diodes with Novel Superlattice Quasi-Quaternary Cladding Layers on InP Substrates
- High Responsivity in Optically Controlled Field-Effect Transistor Using Direct Wafer Bonding Technique
- Switching Operation of GaInAs/InP Multiple-Quantum-Well Directional-Coupler-Type All-Optical Switch
- Surface Damage in GaInAs/GaInAsP/InP Wire Structures Prepared by Substrate-Potential-Controlled Reactive Ion Beam Etching
- Fabrication of GaInAs/GaInAsP/InP Multi-Quantum-Wires and -Boxes by Substrate-Potential-Controlled Electron Cyclotron Resonance Reactive Ion Beam Etching
- Size Fluctuation of 50 nm Periodic GaInAsP/InP Wire Structure by Electron Beam Lithography and Wet Chemical Etching
- Proposal of Semiconductor Directional-Coupler-Type All-Optical Switch with Tapered-Waveguide Structures
- Epitaxial Growth of Metal(CoSi_2)/Insulator(CaF_2) Nanometer-Thick Layered Structure on Si(111)
- Low Temperature (〜420℃) Epitaxial Growth of CaF_2/Si(111) by Ionized-Cluster-Beam Technique
- GaInAsP/InP Compressively Strained Quantum-Wire Lasers Fabricated by Electron Beam Lithography and 2-Step Organometallic Vapor Phase Epitaxy
- Photon Recycling Effect in Semiconductor Lasers using Low Dimensional Structures
- Anisotropic Refractive Index of Porous InP Fabricated by Anodization of (111)A Surface
- Theoretical Gain of Quantum-Well Wire Lasers
- GaInAsP/InP Surface Emitting Injection Lasers
- Stripe Direction Dependence of Mesa Angle Formed on (100) InP by Selective Etching using HCl Solution
- Bending Loss Characteristics of MQW Optical Waveguides (Special Issue on Optical Interconnection)
- Relationship between Barrier Thickness and Crystal Quality in InGaAs/InGaAsP Strained Multi-Quantum Well Structure
- Violet and Near-UV Light Emission from GaN/Al_Ga_N Injection Diode Grown on (0001) 6H-SiC Substrate by Low-Pressure Metal-Organic Vapor Phase Epitaxy
- GaInAsP/InP Single Quantum-Well Lasers by OMVPE
- Conditions for OMVPE Growth of GaInAsP/InP Crystal
- Anisotropic Polarization Properties of Photoluminescence from GaInAsP/InP Quantum-Wire Structures Fabricated by Two-Step Organometallic Vapor Phase Epitaxy Growth
- Proposal of Field-Effect-Type Photodetector Using Field-Screening Effect in the Absorption of Light
- Lateral Junction Waveguide-Type Photodiode Grown on Semi-Insulating InP Substrate
- High Responsivity in an Optically Controlled Field-Effect Transistor Using the Direct Wafer Bonding Technique
- Novel Waveguide GaInAs/InP MQW Optical Deflector Using Comb Like Electrode
- 1.6 μm Wavelength Buried Heterostructure GaInAsP/InP Lasers
- Single Transverse Mode Operation of Terraced Substrate GaInAsP/InP Lasers at 1.3μm Wavelength
- Regrowth Interface Quality Dependence on Thermal Cleaning of AlGaInAs/InP Buried-Heterostructure Lasers
- Improvement of Regrown Interface in InP Organo-Metallic Vapor Phase Epitaxy
- Temperature Characteristics of a GaAs-AlGaAs Integerated Twin Guide Laser with Distributed Bragg Reflectors
- GaInAsP/InP Integrated Twin-Guide Lasers with First-Order Distributed Bragg Reflectors at 1.3 μm Wavelength
- Heteroepitaxial Growth of CdF_2 Layers on CaF_2/Si(111) by Molecular Beam Epitaxy
- CdF_2/CaF_2 Resonant Tunneling Diode Fabricated on Si(111)
- CdF_2/CaF_2 Resonant Tunneling Diode Fabricated on Si(111)
- Fabrication of Vertical and Uniform-Size Porous InP Structure by Electrochemical Anodization
- Novel Structure GaInAsP/InP 1.5-1.6 μm Bundle Integrated-Guide (BIG) Distributed Bragg Reflector Laser
- Dynamic-Single-Mode Semiconductor Lasers : B-2: LD AND LED-1
- Single-Mode Operation of Optically Pumped Membrane Buried Heterostructure Distributed-Feedback Lasers : Optics and Quantum Electronics
- A Modified 1.5μm GaInAsP / InP Bundle-Integrated-Guide Distributed-Bragg-Reflector (BIG-DBR) Laser with an Inner Island Substrate : Waves, Optics and Quantum Electronics
- Improvement of Deposition Rate by Sandblasting of Tungsten Wire in Catalytic Chemical Vapor Deposition
- Low-Loss Amorphous Silicon Multilayer Waveguides Vertically Stacked on Silicon-on-Insulator Substrate
- Moisture-Resistive Properties of SiNx Films Prepared by Catalytic Chemical Vapor Deposition below 100°C for Flexible Organic Light-Emitting Diode Displays