Influence of H2/SiH4 Ratio on the Deposition Rate and Morphology of Polycrystalline Silicon Films Deposited by Atmospheric Pressure Plasma Chemical Vapor Deposition

概要

論文の詳細を見る
Using the atmospheric pressure plasma chemical vapor deposition (AP-PCVD) technique, polycrystalline silicon (poly-Si) films were deposited at high rates. The plasma was generated by 150 MHz very high frequency (VHF) power. Deposition rate, morphology, and structure of the poly-Si films were studied as a function of the H2/SiH4 ratio, using scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray diffraction (XRD). Plasma length and optical emission were also investigated to examine the reaction process in the plasma. The maximum value of deposition rate was 7.4 nm/s at an SiH4 concentration of 0.1% ($\text{H$_{2}$/SiH$_{4}$}=100$). SEM and TEM observations revealed that the poly-Si films had a columnar structure, and that the crystallites in the films deposited at high H2/SiH4 ratios contained no visible defects except at the grain boundaries. It was also shown that the Si film prepared has a preferential orientation of (220) by XRD. In addition, it was found that the plasma length was sensitive to the H2 concentration, while it was not affected by the SiH4 concentration within the deposition conditions used. This fact suggested that almost all the VHF power was consumed in the decomposition of H2 molecules.
Published by the Japan Society of Applied Physics through the Institute of Pure and Applied Physicsの論文
2006-04-30