Heat-Resistant Brazing of Ceramics (Report I) : Brazing of SiC Using Ni-Ti Filler Metals(Physics, Process, Instrument & Measurement)
スポンサーリンク
概要
- 論文の詳細を見る
SiC was brazed to SiC using Ni-xTi filler metals (x=0-50 at%) in a vacuum. The strength and microstructure of SiC joint were investigated by fracture shear loading and electron probe microanalysis, respectively. The strength of SiC joint brazed at 1823K for 1.8ks increases with an increase in Ti content in Ni-Ti fillers. The nickel in Ni-Ti fillers with Ti content of 25 at% or below directly reacts with SiC and forms free graphite and Ni_5Si_2 silicide. The addition of 25 at% or more Ti content to Ni filler suppresses the free graphite formation and forms the TiC carbide. SiC joint brazred with Ni-50Ti filler exhibits the superior strength at elevated temperatures up to 973K. The dispersion hardening of TiC carbide in joinig layer is attributable to the strengthening of SiC joint.
- 大阪大学の論文
著者
-
Okamoto Ikuo
Osaka University
-
NAKA Masaaki
Osaka University
-
TANIGUCHI Hiroshi
Osaka University
-
Taniguchi H
Osaka Univ. Osaka Jpn
-
Taniguchi Hiroshi
Osaka National Research Institute Aist
関連論文
- Wetting and Reaction Products Formed at the Interface Between SiC and Cu-Ti Alloys
- Wetting of Silicon Carbide by Copper-Titanium Alloys(Physics, Process, Instrument & Measurement)
- Physical Meaning of Wetting Curve Traced by Meniscograph Wettability Tester (Report II) : Kinetic Consideration of Flux Action in Soldering(Welding Physics, Process & Instrument)
- Physical Meaning of Wetting Curve Traced by Meniscograph Wettability Tester(Welding Physics, Process & Instrument)
- High Rate Sputtering of Corrosion-Resistant Alloys(Welding Physics, Processes & Instruments)
- Studies on Dissolution of Metal Element from Flux (Report II) : Dissolution of Ag to Molten Zn-Cd Alloys
- Studies on Flux Action of Silver Brazing (Report I) : Metallic Chlorides
- Spreading of BAg-5 on Pre-Flux Coated Stainless Steel Plate : Function of Fluxes Mixed with NiCl_2 or FeCl_3
- Studies on Flux Action of Soldering (Report VII) : Flux Action of various Silver and Copper Salts on Ni and Fe plates
- Studies on Flux Action of Soldering (Report VI) : Effect of Metal Salts on Dissolution of Zn in Molten Sn
- Studies on Flux Action of Soldering (Report V) : Reaction of Flux and Wetting
- Studies on Flux Action of Soldering (Report IV) : Inorganic Metal Salts
- Studies on Flux Action of Soldering (Report III) : Organic Metal Salts
- Studies on Flux Action of Soldering (Report II) : Amine Hydrochloride
- Estimations of Some Unknown Viscosities and Self-diffusivities for Liquid Metals
- Trial Product of Dynamic Co-Axial Cylinder (DCC) Viscometer for Molten Metals, Slags and Salts to 1200℃
- A Phenomenological Theory of Viscosities of Liquids
- Solid State Diffusion Bonding of Silicon Nitride with Vanadium Foils(Materials, Metallurgy & Weldability)
- Interfacial Microstructure of Solid State Diffusion Bonded Silicon Nitride using Niobium Foils(Materials, Metallurgy & Weldability, INTERNATIONAL SYMPOSIUM OF JWRI 30TH ANNIVERSARY)
- Ultrasonic Brazing of Alumina to Copper Using Zn-Al Filler(Materials, Metallurgy & Weldability)
- Influence of Brazing Condition on Shear Strength of Alumina-Kovar Joint Made with Amorphous Cu_Ti_ Filler Metal
- Corrosion Behavior of Amorphous Fe-Cr-Zr Alloys
- Effect of Chromium Addition on Corrosion Resistance of Amorphous Co-Zr Alloys
- Flow of Brazing Filler Metal and Flux
- Studies on Dissolution of Metal Element from Flux (Report-I) : Dissolution of Ag to Molten Tin and Tin Base Binary Alloys
- Reaction of Fused Salts with Molten Zn-Sn and Zn-Cd Alloys (1)
- Effect of Hole in Brazing Sheet on Vacuum Brazability of Aluminum Tubes
- Erosion of Pure Copper by Copper Phosphorus Brazing Filler Metals containing Tin and Silver : Copper Phosphorus Brazing Filler Metals with Low Melting Temperature (Report V)(Physics, Process, Instrument & Measurement)
- Spreading of Copper Phosphorus Brazing Filler Metals with Low Melting Temperature containing silver and/or Tin : Copper Phosphorus Brazing Filler Metals with Low Melting Temperature (Report IV)(Physics, Process, Instrument & Measurement)
- Liquidus Surface of Quaternary Copper Phosphorus Brazing Filler Metals with Silver and Tin : Copper Phosphorus Brazing Filler Metals with Low Melting Temperature (Report III)(Materials, Metallurgy & Weldability)
- Phase Diagrams of Cu-Ag-P and Cu-Sn-P Ternary Brazing Filler Metals : Copper Phosphorus Brazing Filler Metals with Low Melting Temperature-Report II(Materials, Metallurgy & Weldability)
- Reaction and Structure at the Solid State Diffusion Bonded Ti/Si_3N_4 Interface(Materials, Metallurgy & Weldability)
- High Temperature Corrosion of Nickel Based Heat Resistant Alloys and their Diffusion Brazed Parts(Materials, Metallurgy & Weldability)
- Laser Metallization of Ceramics
- Heat-Resistant Brazing of Ceramics (Report I) : Brazing of SiC Using Ni-Ti Filler Metals(Physics, Process, Instrument & Measurement)
- An Approach to Viscosity Calculations of Molten Iron and Its Dilute Binary Alloys
- Amorphous Alloy and Its Application to Joining
- Joining of Alumina to Copper Using Amorphous Cu-Ti Filler Metal(Materials, Metallurgy & Weldability)
- Joining of Al_2O_3 to SUS 304 with Ti Foil
- Wetting of Zirconia by Cu-Zr Alloys
- Sacrificial Anode Type Al-10Si-1Mg Brazing Filler Metals for Suppression of Corrosion of Brazed 3003 Aluminum Alloy(Materials, Metallurgy & Weldability)
- Interfacial Structure and Bond Strength of Solid State Bonded SiC/Ni Joints(Materials, Metallurgy & Weldability)
- Effect of Sn Addition to Cu-Ti Filler Metals on Microstructure and Strength of SiC/SiC Joint(Materials, Metallurgy & Weldability)
- Interfacial Microstructure and Reaction Phases in Si_3N_4/Si_3N_4 Joints Brazed with Cu-Zn-Ti Filler Alloy(Materials, Metallurgy & Weldability, INTERNATIONAL SYMPOSIUM OF JWRI 30TH ANNIVERSARY)
- 408 REACTION SYNTHESIS OF NiAl-TiC COMPOSITES AND IN-SITU JOINING TO Ni_3Al ALLOYS
- Brazing of Si_3N_4 to Metals with Al-Cu Filler Metals(Physics, Process, Instrument & Measurement)
- Brazing of Si_3N_4 to Metals with Al Filler (Report II) : Si_3N_4/Fe, Ni, Cu, Al or SUS304 Joint(Physics, Process, Instrument & Measurement)
- Brazing of Si_3N_4 to Metals with Al Filler (Report I) : Si_3N_4/Si_3N_4 and Si_3N_4/Ti or Nb Joints(Materials, Metallurgy & Weldability)
- Intermediary Layer of Titanium Oxide in Al_2O_3/Cu Joint Using Amorphous Cu-Ti Filler Metals
- Formation of Hercynite (FeAl_2O_4) at Interface of Al_2O_3/Steel Joint
- Effect of Flux Composition on Wettability in Soldering of Aluminum(Materials, Metallurgy & Weldability)
- Effect of Curvature on Fillet Formation during Aluminum Brazing(Materials, Metallurgy & Weldability)
- Strength of Titanium Joints Brazed with Aluminum Filler Metals(Physics, Process, Instrument & Measurement)
- Aluminum Brazing Filler Metals for Making Aluminum to Titanium Joints in a Vacuum(Physics, Process, Instrument & Measurement)
- Appiication of Amorphous Cu-Ti Filler Metal to Joining of Silicon Nitride
- Joining of Silicon Nitride Using Amorphous Cu-Ti Filler Metal(Materials, Metallurgy & Weldability)
- Joining of SiC Using Amorphous Ti Base Filler Metal(Materials, Metallurgy & Weldability)
- Joining of Silicon Nitride to Metals or Alloys Using Amorphous Cu-Ti Filler Metal(Materials, Metallurgy & Weldability)
- Non-oxide Ceramics (Si_3N_4, SiC) Joint Made with Amorphous Cu_Ti_ and Ni_Ti_ Filler Metals
- Analysis of Temperature Field with Equiradial Cooling Boundary around Moving Heat Sources : Heat Conduction Analysis for Estimation of Thermal Hysteresis during Underwater Welding(Welding Physics, Processes & Instruments)
- Spreading of BAg-5 on Pre-Flux Coated Stainless Steel Plate (Report II) : Function of Fluxes Mixed with CuCl or CoCl_2(Welding Physics, Processes & Instruments)
- H_2S Gas Corrosion Resistance of Copper Joints Brazed with Low Melting Temperature Copper Phosphorus Brazing Filler Metals(Mechanics, Strength & Structural Design)
- Copper Phosphorus Brazing Filler Alloys with Low Melting Temperature (Report I) : Effect of Tin Addition
- Interaction between Supersonic Jet and Burning Iron Wall in Oxygen Gas Cutting (Part II) : Combustion Stability and Flame Cutting Mechanism(Welding Physics, Process & Instrument)
- Interaction between Supersonic Jet and Burning Iron Wall in Oxygen Gas Cutting (Part I) : Shock Wave Behaviour and Combustion Phenomena(Welding Physics, Process & Instrument)
- Bonding Behavior between Niobium and Reaction-Sintered SiC(Materials, Metallurgy & Weldability)
- Pressure and Field-Assisted Bonding of Glass to Aluminum(Materials, Metallurgy & Weldability)
- Studies on Flux Action of Soldering (Report-1) : Stearic Acid
- Stress Corrosion Cracking Mechanism of Cu-4% Ti Alloy(Welding Mechanics, Strength & Design)
- Forschung in Bezug auf die Lotbruchigkeit von Kohlenstoffstahl (Bericht 3) : EinfluB der Zuggeschwindigkeit auf die Lotbrilchigkeit(Materials, Metallurgy & Weldability)
- Study on Liquid Metal Embrittlement of Carbon Steels (Report 2) : Effect of Erosion of Carbon Steel in Liquid Metals on LME(Materials, Metallurgy & Weldability)
- Study on Liquid Metal Embrittlement of Carbon Steels (Report 1) : Penetration Behavior of Liquid Metal(Welding Physics, Processes & Instruments)
- Some Fundamental Research of New Type Powder Oxygen Cutting Method for Stainless Steel(WELDING PHYSICS, PROCESSES AND INSTRUMENTS)
- A Study on Tunneling Flow of Filler Metal in Aluminum Brazing(Welding Physics, Processes & Instruments)
- Analysis of Temperature Distribution with Radial Symmetrical Cooling Terminal around Moving Heat Source
- Vacuum Brazing of Aluminum Using Al-12%Si System Filler Alloy
- Vacuum Brazing of Aluminum Using Al-12%Si System Filler Alloy
- Electrochemical Actions of Flux for Soldering
- Selection of Optimum Cu Content in Cu Bearing Tin-Lead Solder(Materials, Metallurgy & Weldability)
- Wetting of Alumina by Molten Aluminum and Aluminum-Copper Alloys(Welding Physics, Process & Instrument)
- Occurrence of Non-Wetted Parts in Dip Soldering (Report-1)(Welding Physics, Processes & Instruments)
- Joining Al_2O_3 to Al_2O_3 by Brazing
- Stress Corrosion Cracking and Anodic Dissolution Behavior of 5083 Aluminum Alloy(Materials, Metallurgy & Weldability)
- Studies on Brazability of Electric Contact Chip Materials (Report I) : Effect of Surface Preparation of Sintered Tungsten Alloys on Wetting of BAg Filler Metals
- Soldering Temperature and Wetting Temperature
- Effect of Iron Content in Brazing Filler Metals on Corrosion of Brazed Aluminum(Materials, Metallurgy & Weldability)
- Wetting of Silicon Nitride by Copper-Titanium or Copper-Zirconium Alloys(Welding Physics, Process & Instrument)
- Bonding of Alumina using Cupreous Oxide as Insert Material
- Corrosion Behaviour of Silver Brazed Stainless Steel in Chloride Solutions(Materials, Metallurgy, Weldability)
- Vacuum Brazing of Aluminum (Report-I) : Effect of Surface Treatment
- Corrosion Mechanism of Silver Brazed Stainless Steel Joint in Chloride Solutions(Materials, Metallurgy, Weldability)
- Vacuum Brazing of Aluminum (Report-II) : Effect of Emery Paper Grinding
- Cutting of Stainless Steel by New Type Powder-Oxygen Cutting Method
- Brazability of Aluminum using Al-Si Filler Alloys with Different Compositions and Microstructures
- Effect of Bismuth Addition to Brazing Sheet Claddings on Fluxless Brazability of Aluminum(Welding Physics, Process & Instrument)
- Brazability and Erosion by Molten Filler Alloy of Aluminum Base Plates with Intermetallic Compounds(Materials, Metallurgy & Weldability)
- Parallel Gap Resistance Welding of Lead Wires to Metal Spray Coating Films
- Studies on Flux Action of Soldering (Report VIII) : Dissolution and Adsorption Effect
- Relation Between Spreading Area and Penetration Height in Soldering : On Wetting
- The Crystallization Kinetics of Glassy Fe_ Ni_ P_