Studies on Flux Action of Soldering (Report II) : Amine Hydrochloride
スポンサーリンク
概要
- 論文の詳細を見る
In this report, aniline hydrochloride flux action of soldering was studied on the relation between the reaction of flux with base metal (Cu) or with Sn-Pb alloy solder and spreading phenomenon. The flux action of aniline hydrochloride may be considered as follows: Molten aniline hydrochloride reacts with copper of base metal to give CuCl_2 and copper complex, which react with molten Sn-Pb alloy solder to give metal copper. Copper dissolves immediately into molten solder and the thin Cu-rich layer at the outer surface of molten solder is formed. The wetting of Sn-Pb alloy solder on copper plate is improved by the reaction and the dissolution of Cu into molten solder. So, Sn-Pb alloy solder spreads well over copper plate.
- 大阪大学の論文
著者
関連論文
- Wetting and Reaction Products Formed at the Interface Between SiC and Cu-Ti Alloys
- Wetting of Silicon Carbide by Copper-Titanium Alloys(Physics, Process, Instrument & Measurement)
- Physical Meaning of Wetting Curve Traced by Meniscograph Wettability Tester (Report II) : Kinetic Consideration of Flux Action in Soldering(Welding Physics, Process & Instrument)
- Physical Meaning of Wetting Curve Traced by Meniscograph Wettability Tester(Welding Physics, Process & Instrument)
- High Rate Sputtering of Corrosion-Resistant Alloys(Welding Physics, Processes & Instruments)
- Studies on Dissolution of Metal Element from Flux (Report II) : Dissolution of Ag to Molten Zn-Cd Alloys
- Studies on Flux Action of Silver Brazing (Report I) : Metallic Chlorides
- Spreading of BAg-5 on Pre-Flux Coated Stainless Steel Plate : Function of Fluxes Mixed with NiCl_2 or FeCl_3
- Studies on Flux Action of Soldering (Report VII) : Flux Action of various Silver and Copper Salts on Ni and Fe plates
- Studies on Flux Action of Soldering (Report VI) : Effect of Metal Salts on Dissolution of Zn in Molten Sn
- Studies on Flux Action of Soldering (Report V) : Reaction of Flux and Wetting
- Studies on Flux Action of Soldering (Report IV) : Inorganic Metal Salts
- Studies on Flux Action of Soldering (Report III) : Organic Metal Salts
- Studies on Flux Action of Soldering (Report II) : Amine Hydrochloride
- Estimations of Some Unknown Viscosities and Self-diffusivities for Liquid Metals
- Trial Product of Dynamic Co-Axial Cylinder (DCC) Viscometer for Molten Metals, Slags and Salts to 1200℃
- A Phenomenological Theory of Viscosities of Liquids
- Ultrasonic Brazing of Alumina to Copper Using Zn-Al Filler(Materials, Metallurgy & Weldability)
- Influence of Brazing Condition on Shear Strength of Alumina-Kovar Joint Made with Amorphous Cu_Ti_ Filler Metal
- Corrosion Behavior of Amorphous Fe-Cr-Zr Alloys
- Effect of Chromium Addition on Corrosion Resistance of Amorphous Co-Zr Alloys
- Flow of Brazing Filler Metal and Flux
- Studies on Dissolution of Metal Element from Flux (Report-I) : Dissolution of Ag to Molten Tin and Tin Base Binary Alloys
- Reaction of Fused Salts with Molten Zn-Sn and Zn-Cd Alloys (1)
- Effect of Hole in Brazing Sheet on Vacuum Brazability of Aluminum Tubes
- Erosion of Pure Copper by Copper Phosphorus Brazing Filler Metals containing Tin and Silver : Copper Phosphorus Brazing Filler Metals with Low Melting Temperature (Report V)(Physics, Process, Instrument & Measurement)
- Spreading of Copper Phosphorus Brazing Filler Metals with Low Melting Temperature containing silver and/or Tin : Copper Phosphorus Brazing Filler Metals with Low Melting Temperature (Report IV)(Physics, Process, Instrument & Measurement)
- Liquidus Surface of Quaternary Copper Phosphorus Brazing Filler Metals with Silver and Tin : Copper Phosphorus Brazing Filler Metals with Low Melting Temperature (Report III)(Materials, Metallurgy & Weldability)
- Phase Diagrams of Cu-Ag-P and Cu-Sn-P Ternary Brazing Filler Metals : Copper Phosphorus Brazing Filler Metals with Low Melting Temperature-Report II(Materials, Metallurgy & Weldability)
- High Temperature Corrosion of Nickel Based Heat Resistant Alloys and their Diffusion Brazed Parts(Materials, Metallurgy & Weldability)
- Laser Metallization of Ceramics
- Heat-Resistant Brazing of Ceramics (Report I) : Brazing of SiC Using Ni-Ti Filler Metals(Physics, Process, Instrument & Measurement)
- Recent Trend of Researches on Restraint Stresses and Strains for Weld Cracking
- An Approach to Viscosity Calculations of Molten Iron and Its Dilute Binary Alloys
- On the Fillet Weld Cracking of 50kg/mm^2 Grade High Strength Steels : On the Heel-Crack
- Effect of Fabricating Process on Notch Toughness of Shipbuilding Steel Plates (Report II) : Superposition of Welding on Cold Work and Its Effect on Brittle Fracture Strength
- Effect of Fabricating Process on Notch Toughness of Shipbuilding Steel Plates (Report I) : Effect of Line-Heating on Notch Toughness of 50 kg/mm^2-Class High-Tensile Steel Plates
- Correlation of Fracture Toughness Determined by Spin Burst Testing and Deep Notch Test
- Varestraint Test for Hot Crack Susceptibility of HY-type High Strength Steels
- Amorphous Alloy and Its Application to Joining
- Joining of Alumina to Copper Using Amorphous Cu-Ti Filler Metal(Materials, Metallurgy & Weldability)
- Joining of Al_2O_3 to SUS 304 with Ti Foil
- Wetting of Zirconia by Cu-Zr Alloys
- Sacrificial Anode Type Al-10Si-1Mg Brazing Filler Metals for Suppression of Corrosion of Brazed 3003 Aluminum Alloy(Materials, Metallurgy & Weldability)
- Brazing of Si_3N_4 to Metals with Al-Cu Filler Metals(Physics, Process, Instrument & Measurement)
- Brazing of Si_3N_4 to Metals with Al Filler (Report II) : Si_3N_4/Fe, Ni, Cu, Al or SUS304 Joint(Physics, Process, Instrument & Measurement)
- Brazing of Si_3N_4 to Metals with Al Filler (Report I) : Si_3N_4/Si_3N_4 and Si_3N_4/Ti or Nb Joints(Materials, Metallurgy & Weldability)
- Intermediary Layer of Titanium Oxide in Al_2O_3/Cu Joint Using Amorphous Cu-Ti Filler Metals
- Formation of Hercynite (FeAl_2O_4) at Interface of Al_2O_3/Steel Joint
- Effect of Flux Composition on Wettability in Soldering of Aluminum(Materials, Metallurgy & Weldability)
- Effect of Curvature on Fillet Formation during Aluminum Brazing(Materials, Metallurgy & Weldability)
- Strength of Titanium Joints Brazed with Aluminum Filler Metals(Physics, Process, Instrument & Measurement)
- Aluminum Brazing Filler Metals for Making Aluminum to Titanium Joints in a Vacuum(Physics, Process, Instrument & Measurement)
- Appiication of Amorphous Cu-Ti Filler Metal to Joining of Silicon Nitride
- Joining of Silicon Nitride Using Amorphous Cu-Ti Filler Metal(Materials, Metallurgy & Weldability)
- Joining of SiC Using Amorphous Ti Base Filler Metal(Materials, Metallurgy & Weldability)
- Joining of Silicon Nitride to Metals or Alloys Using Amorphous Cu-Ti Filler Metal(Materials, Metallurgy & Weldability)
- Non-oxide Ceramics (Si_3N_4, SiC) Joint Made with Amorphous Cu_Ti_ and Ni_Ti_ Filler Metals
- Analysis of Temperature Field with Equiradial Cooling Boundary around Moving Heat Sources : Heat Conduction Analysis for Estimation of Thermal Hysteresis during Underwater Welding(Welding Physics, Processes & Instruments)
- Spreading of BAg-5 on Pre-Flux Coated Stainless Steel Plate (Report II) : Function of Fluxes Mixed with CuCl or CoCl_2(Welding Physics, Processes & Instruments)
- H_2S Gas Corrosion Resistance of Copper Joints Brazed with Low Melting Temperature Copper Phosphorus Brazing Filler Metals(Mechanics, Strength & Structural Design)
- Copper Phosphorus Brazing Filler Alloys with Low Melting Temperature (Report I) : Effect of Tin Addition
- Interaction between Supersonic Jet and Burning Iron Wall in Oxygen Gas Cutting (Part II) : Combustion Stability and Flame Cutting Mechanism(Welding Physics, Process & Instrument)
- Interaction between Supersonic Jet and Burning Iron Wall in Oxygen Gas Cutting (Part I) : Shock Wave Behaviour and Combustion Phenomena(Welding Physics, Process & Instrument)
- Bonding Behavior between Niobium and Reaction-Sintered SiC(Materials, Metallurgy & Weldability)
- Pressure and Field-Assisted Bonding of Glass to Aluminum(Materials, Metallurgy & Weldability)
- Studies on Flux Action of Soldering (Report-1) : Stearic Acid
- Stress Corrosion Cracking Mechanism of Cu-4% Ti Alloy(Welding Mechanics, Strength & Design)
- Forschung in Bezug auf die Lotbruchigkeit von Kohlenstoffstahl (Bericht 3) : EinfluB der Zuggeschwindigkeit auf die Lotbrilchigkeit(Materials, Metallurgy & Weldability)
- Study on Liquid Metal Embrittlement of Carbon Steels (Report 2) : Effect of Erosion of Carbon Steel in Liquid Metals on LME(Materials, Metallurgy & Weldability)
- Study on Liquid Metal Embrittlement of Carbon Steels (Report 1) : Penetration Behavior of Liquid Metal(Welding Physics, Processes & Instruments)
- Some Fundamental Research of New Type Powder Oxygen Cutting Method for Stainless Steel(WELDING PHYSICS, PROCESSES AND INSTRUMENTS)
- A Study on Tunneling Flow of Filler Metal in Aluminum Brazing(Welding Physics, Processes & Instruments)
- Analysis of Temperature Distribution with Radial Symmetrical Cooling Terminal around Moving Heat Source
- Vacuum Brazing of Aluminum Using Al-12%Si System Filler Alloy
- Vacuum Brazing of Aluminum Using Al-12%Si System Filler Alloy
- Electrochemical Actions of Flux for Soldering
- Selection of Optimum Cu Content in Cu Bearing Tin-Lead Solder(Materials, Metallurgy & Weldability)
- Wetting of Alumina by Molten Aluminum and Aluminum-Copper Alloys(Welding Physics, Process & Instrument)
- Occurrence of Non-Wetted Parts in Dip Soldering (Report-1)(Welding Physics, Processes & Instruments)
- Joining Al_2O_3 to Al_2O_3 by Brazing
- Stress Corrosion Cracking and Anodic Dissolution Behavior of 5083 Aluminum Alloy(Materials, Metallurgy & Weldability)
- Studies on Brazability of Electric Contact Chip Materials (Report I) : Effect of Surface Preparation of Sintered Tungsten Alloys on Wetting of BAg Filler Metals
- Soldering Temperature and Wetting Temperature
- Effect of Iron Content in Brazing Filler Metals on Corrosion of Brazed Aluminum(Materials, Metallurgy & Weldability)
- Wetting of Silicon Nitride by Copper-Titanium or Copper-Zirconium Alloys(Welding Physics, Process & Instrument)
- Bonding of Alumina using Cupreous Oxide as Insert Material
- Corrosion Behaviour of Silver Brazed Stainless Steel in Chloride Solutions(Materials, Metallurgy, Weldability)
- Vacuum Brazing of Aluminum (Report-I) : Effect of Surface Treatment
- Corrosion Mechanism of Silver Brazed Stainless Steel Joint in Chloride Solutions(Materials, Metallurgy, Weldability)
- Vacuum Brazing of Aluminum (Report-II) : Effect of Emery Paper Grinding
- Cutting of Stainless Steel by New Type Powder-Oxygen Cutting Method
- Brazability of Aluminum using Al-Si Filler Alloys with Different Compositions and Microstructures
- Effect of Bismuth Addition to Brazing Sheet Claddings on Fluxless Brazability of Aluminum(Welding Physics, Process & Instrument)
- Brazability and Erosion by Molten Filler Alloy of Aluminum Base Plates with Intermetallic Compounds(Materials, Metallurgy & Weldability)
- Parallel Gap Resistance Welding of Lead Wires to Metal Spray Coating Films
- Studies on Flux Action of Soldering (Report VIII) : Dissolution and Adsorption Effect
- Relation Between Spreading Area and Penetration Height in Soldering : On Wetting
- The Crystallization Kinetics of Glassy Fe_ Ni_ P_