New DFT Techniques of Non-Scan Sequential Circuits with Complete Fault Efficiency
スポンサーリンク
概要
- 論文の詳細を見る
As opposed to scan schemes, non-scan DFT allows at-speed testing. This paper suggests three techniques on non-scan DFT of sequential circuits. The novelty of the proposed techniques is that by using combinational ATPG tool 100% fault efficiency is guaranteed. Test sequences are generated from test patterns obtained by ATPG tool on the combinational part of the sequential machine. In all techniques, an additional circuit to reach invalid states (CRIS) is proposed to reach unreachable states on the state register of a machine. The second and third technique use an additional hardware called differentiating logic (DL), which uniquely identify a state appearing in a state register. The design of this DL is universal, i.e., not dependent on the circuit structure. Hardware overhead of DL and CRIS is lower than that of full scan. Test generation and test application time are also found to compare favorably to those of earlier designs.
- 社団法人電子情報通信学会の論文
- 1998-12-18
著者
-
Fujiwara H
Nara Inst. Sci. And Technol. Ikoma‐shi Jpn
-
Fujiwara Hideo
Graduate School Of Information Science Nara Institute Of Science And Technology
-
OHTAKE Satoshi
Graduate School of Information Science, Nara Institute of Science and Technology (NAIST)
-
Das D
Jadavpur Univ. Calcutta Ind
-
Ohtake Satoshi
Graduate School Of Information Science Nara Institute Of Science And Technology
-
Das Debesh
Dept. of Comp. Sc. and Engg. Jadavpur University
-
Fujiwara Hideo
Graduate School Of Information Of Science Nara Institute Of Science And Technology
関連論文
- Classification of Sequential Circuits Based on τ^k Notation and Its Applications(VLSI Systems)
- F-Scan: A DFT Method for Functional Scan at RTL
- Analyzing Path Delay Fault Testability of RTL Data Paths:A Non-Scan Approach (デザインガイヤ2000) -- (VLSIの設計/検証/テスト及び一般)
- On the Effect of Scheduling in Test Generation
- Reduction in Over-Testing of Delay Faults through False Paths Identification Using RTL Information
- A Test Plan Grouping Method to Shorten Test Length for RTL Data Paths under a Test Controller Area Constraint(Test)(Dependable Computing)
- A Test Plan Grouping Method to Shorten Test Length for RTL Data Paths under a Test Controller Area Constraint
- Design for Two-Pattern Testability of Controller-Data Path Circuits
- Analyzing Path Delay Fault Testability of RTL Data Paths:A Non-Scan Approach (デザインガイヤ2000) -- (VLSIの設計/検証/テスト及び一般)
- Analyzing Path Delay Fault Testability of RTL Data Paths: A Non-Scan Approach (デザインガイヤ2000) -- (VLSIの設計/検証/テスト及び一般)
- New DFT Techniques of Non-Scan Sequential Circuits with Complete Fault Efficiency
- NoC-Compatible Wrapper Design and Optimization under Channel-Bandwidth and Test-Time Constraints
- On NoC Bandwidth Sharing for the Optimization of Area Cost and Test Application Time
- Scheduling Power-Constrained Tests through the SoC Functional Bus
- NoC Wrapper Optimization under Channel Bandwidth and Test Time Constraints
- Power-Conscious Microprocessor-Based Testing of System-on-Chip
- Power-Conscious Microprocessor-Based Testing of System-on-Chip(テスト,システム設計及び一般)
- A Test Generation Framework using Checker Circuits and its Application to Path Delay Test Generation
- A Broadside Test Generation Method for Transition Faults in Partial Scan Circuits
- A Broadside Test Generation Method for Transition Faults in Partial Scan Circuits
- A Broadside Test Generation Method for Transition Faults in Partial Scan Circuits
- A Broadside Test Generation Method for Transition Faults in Partial Scan Circuits
- Equivalence of Sequential Transition Test Generation and Constrained Combinational Stuck-at Test Generation
- A Design Scheme for Delay Testing of Controllers Using State Transition Information
- A Simple Parallel Algorithm for the Medial Axis Transform (Special Issue on Architectures Algorithms and Networks for Massively parallel Computing)
- Thermal-Aware Test Access Mechanism and Wrapper Design Optimization for System-on-Chips
- Thermal-aware test scheduling with cycle-accurate power profiles and test partitioning (システムLSI設計技術・デザインガイア2007--VLSI設計の新しい大地を考える研究会)
- Thermal-aware test scheduling with cycle-accurate power profiles and test partitioning (ディペンダブルコンピューティング)
- Thermal-aware test scheduling with cycle-accurate power profiles and test partitioning (VLSI設計技術)
- Power constrained IP core wrapper design with partitioned clock domains (回路とシステム)
- Power constrained IP core wrapper design with partitioned clock domains (VLSI設計技術)
- Power constrained IP core wrapper design with partitioned clock domains (信号処理)
- Performance Analysis of Parallel Test Generation for Combinational Circuits
- A New Class of Sequential Circuits with Combinational Test Generation Complexity for Path Delay Faults
- Design for Hierarchical Two-Pattern Testability of Data Paths
- A Self-Stabilizing Spanning Tree Protocol that Tolerates Non-quiescent Permanent Faults
- A DFT Method for Core-Based Systems-on-a-Chip Based on Consecutive Testability
- A Fault Dependent Test Generation Method for State-Observable FSMs to Increase Defect Coverage under the Test Length Constraint
- Classification of Sequential Circuits Based on Combinational Test Generation Complexity
- A Non-scan DFT Method at Register-Transfer Level to Achieve 100% Fault Efficiency (特集:システムLSIの設計技術と設計自動化)
- ホールド機能を考慮した順序回路のテスト容易化設計法
- Power-Constrained Test Synthesis and Scheduling Algorithms for Non-Scan BIST-able RTL Data Paths(Dependable Computing)
- F-Scan : A DFT Method for Functional Scan at RTL
- A Low Power Deterministic Test Using Scan Chain Disable Technique
- A secure scan design approach using extended de Bruijn graph (ディペンダブルコンピューティング)
- A New Data Structure for SAT-Based Static Learning With Impact on Test Generation (特集 新アーキテクチャLSI技術および一般)
- Non-scan Design for Testability for Synchronous Sequential Circuits Based on Fault-Oriented Conflict Analysis(Fault Tolerance)
- Non-scan Design for Testability for Synchronous Sequential Circuits Based on Fault-Oriented Conflict Analysis
- A-3-9 Analysis of Fault Coverage under a Power Budget in Scan Testing
- A Method of Path Mapping from RTL to Gate Level and Its Application to False Path Identification
- Differential Behavior Equivalent Classes of Shift Register Equivalents for Secure and Testable Scan Design