Determination of Condition for Electrolytic Extractions of Nitrides in Steel by Means of Potentiostat
スポンサーリンク
概要
- 論文の詳細を見る
The polarizing characteristics of synthesized nitrides, Fe_3N, Fe_4N, Mn_3N_2 Mo_2N, MoN, Cr_2N CrN, VN, Si_3N_4 AlN, TiN, ZrN and NbN, were studied by means of potentiostat in order to determine the condition for the electrolytic extractions of nitrides from iron and steel. From the results of polarization curves and natural electrode potentials of iron and nitrides, some useful informations were obtained as to the electrolyte and the electrolytic potential for the electrolytic extractions of nitrides contained in iron and steel ; that is, if a suitable electrolytic potential is applied, both acidic and neutral solutions can be used as an electrolyte for the extractions except nitrides of Al, Fe and Mn. For the Fe-nitride, only neutral electrolyte is useful, while for the nitrides of Al and Mn, there seems to be no favorable electrolyte.
- 東北大学の論文
著者
-
IMAI Yunoshin
The Research Institute for Iron, Steel and Other Metals
-
Imai Yunoshin
The Research Institute For Iron Steel And Other Metals
-
Masumoto Tsuyoshi
The Research Development Corporation Of Japan:the Research Institute For Iron Steel And Other Metals
関連論文
- Residual Stress in Steel Due to Heat Treatment
- Effect of Cyclic Heat-Treatments on the Martensitic Transformation in Iron-Nickel Binary Alloys
- Random Anisotropy Model for Nanocrystalline Soft Magnetic Alloys with Grain-Size Distribution
- Development of Common Mode Choke Coil Made of New Nanocrystalline Soft Magnetic Alloy "NANOPERM^[○!R]"
- Compositional Effect on the Two-Stage Enthalpy Relaxation of Metal-Metalloid Amorphous Alloys upon Annealing
- Superconducting Properties of Metastable bcc Solid Solution in Melt-quenched Zr-Ge Binary Alloys
- Young's Modulus of Fe-Si-B Amorphous Wires
- The Critical Thickness for the Formation of Fe-, Ni- and Co-Based Amorphous Alloys with Metalloids
- Formation Range, Mechanical Properties and Thermal Stability of Superconducting Zr-Si Amorphous Alloys
- Effect of Micro-Structure on Creep of 25% Chromium Steel
- Relationship between the Solid Phase Equilibrium and the Isothermal Martensite Transformation in Fe-Ni-Cr and Fe-Ni-Mn Alloys
- Preparation of Amorphous Metallic Powder
- Effects of Substrate Temperature and Heat Treatment on GMR Properties of Co-RE-O Nano-granular Films
- Effect of Temperature and Deformation on the Structure of Amorphous Metals
- Powder-Forming Tendency of Nonequilibrium Phases in Fe-C-X (X=Cr, Mo, W, Al or Si) Alloys by Comminution and Microstructure and Hardness of Their Sintered Compacts
- Hydrogenation of Amorphous and Crystalline Gd-Co Alloys
- Dynamic Compaction of Amorphous Co_Fe_Si_B_ Alloy Powders Obtained by a Cavitation Method
- Delayed Fracture of Amorphous Alloys in Atmosphere
- Crystallization Behavior of Amorphous High-Carbon Alloy Steels
- Nonequilibrium Phases in Melt-Quenched Co-W-C Alloys and Their Powder-Forming Tendency by Comminution
- Structural Diagrams and Phase Reactions of Fe-Cr-N Ternary System
- Microstructures and Nitrides of Fe-Cr-N Ternary System
- High Frequency Core Loss and Initial Permeability of Ferromagnetic Amorphous Ribbons
- Magnetostriction of Fe-Co Amorphous Alloys
- Ti-Nb-Si Amorphous Alloys for Application to Diaphragm in Watches
- Residual Stresses in Steels due to Heat Treatments
- The Structure of Amorphous Iron-Phosphorus Alloys
- Structural Study of an Amorphous Liquid-quenched Ni_-P_ Alloy
- Effects of Alloying Elements on the Corrosion Behavior of Amorphous Cobalt-Base Alloys
- Effect of Molybdenum on the Corrosion Behavior of Amorphous Fe-Mo-C alloys in 1N HCl
- Effect of Nickel on the Solubility and Diffusion of Nitrogen in Alpha-Iron
- Study on A_3 Transformation of Dispersion-Strengthened Iron
- Mechanical and Physical Properties of Dispersion-Strengthened Iron
- Self-Diffusion in Single Crystal of Silver Containing Alumina Particles
- Studies on the Yield Strength of Dispersion Strengthened Alloys
- Influence of Hydrogenation on the Magnetic Properties of Gd-Co Amorphous Alloys
- Hydrogenation of Amorphous and Crystalline RE-Ni Alloys
- Thermal, Magnetic and Electrical Properties of Mn-Metalloid Amorphous Ribbons
- The Magnetic and Electric Properties of (Co_ Mn_x)_2B Crystalline compounds and Amorphous Alloys
- Pressure Effects on the Curie Temperature and Electrical Resistance of Fe-based Amorphous Alloys
- Static Consolidation of Co-base Amorphous Alloy Powders and Their Mechanical and Magnetic Properties
- Softening of Co-base Amorphous Alloys at High Temperatures
- Effects of Alloying Element on Supercooled A_3 Transformation of Iron
- Effect of Cooling Rate on A_3 Transformation Temperatures of Iron and Iron-Nickel Binary Alloys
- Thermodynamic Study on the Transformation of Austenite into Martensite in Iron-High Nitrogen and Iron-Carbon Binary System
- Sub-Zero Treatment of Quenched Steel. I : On the Stabilization of Retained Austenite
- Short-Range Structures of Amorphous and Liquid Iron and Pd_-Si_ Alloy
- Magnetic Properties of Amorphous Fe-Zr-B Alloys
- The Precipitation of χ-carbide in the Tempering Process of High Carbon Steels
- Electrical Resistance in Superconducting Amorphous Alloy Zr_Ir_
- Upper Critical Field of Superconducting Amorphous Alloy Zr_Si_
- Effect of Compositions on the Crystallization of (Fe, Ni, Co)-Si-B Amorphous Alloys
- An Electron Microscopic Study on the Crystallization of Amorphous Ti-(Fe, Co or Ni)-B Alloys
- Superconductivity of Ti-Nb-Si Alloys Crystallized from the Amorphous State
- Transformation of Retained Austenite and Observation of Cracks under Low-Cycle Fatigue Testing
- Solubility of Nitrogen in Austenitic Iron under High Nitrogen Pressure and Thermodynamic Properties of Iron-Nitrogen Interstitial Solid Solution
- Development of High Temperature and High Pressure Equipment for Study of Reaction between Gas and Metals, and Some Experimental Results
- Structural Diagrams and Solid Phase Reactions of the Quaternary 7% Cr-Fe-C-N System
- Structural Diagrams and Phase Reactions of the Quaternary 12%Cr-Fe-C-N System
- Constitutional Diagrams of Iron-Rich Corner in 18% Cr-Fe-C-N System
- The Temperature and Stress Dependences of the Steady-State Creep Rate of Ferritic Iron-Chromium Alloys
- Nitrogen as the Alloying Element in Steels. I : On the Effect of Nitrogen on the Temper-Brittleness in Steels
- Study of the Mechanical Properties of the Unnotched and Notched Specimens under High Speed Impact-Bending
- X-ray Investigation of Low-Cycle Fatigue in Martensitic Steels
- Isothermal Martensitic Transformation in Fe-Ni-Cr Alloy
- Precipitation of Carbides in 12% Cr Steel during Tempering
- The Effects of Grain Size and Precipitate on Strength of Nb-Treated Steels
- Precipitation Behaviours of Austenitic Steel of Manganese-Chromium Type Containing Vanadium
- Anomalous Contraction near 500℃ in Austenitic Heat-Resisting Alloys Containing Chromium and Nickel
- Effect of Nitrogen and Other Alloying Elements on the Low-Temperature Brittleness of Steel. III : Nitrogen Fix and Nitrogen in Quench-Tempered Steel
- Effect of Nitrogen and Few Other Elements on Strain Aging of Steels
- Effect of Nitrogen and Other Alloying Elements on the Low-Temperature Brittleness of Steel. IV : Effect of Quench-Tempering
- Corrosion of Chromium Steel by Liquid Bismuth
- Effect of Molybdenum upon the High-Temperature Oxidation and the V_2O_5 Attack on Ni-Cr-Base Alloys
- Corrosion of Carbon Steel by Liquid Bismuth
- Effect of Nitrogen and Other Alloying Elements on the Low-Temperature Brittleness of Steel. I : Correlation of Nitrogen and Carbon
- New Secondary Phase in Austenitic Fe-Co-Cr-Ni Base Heat-Resisting Alloy
- Determination of Condition for Electrolytic Extractions of Nitrides in Steel by Means of Potentiostat
- Residual Stresses in Steels due to Heat Treatments. II
- Effect of Nitrogen and Other Alloying Elements on the Low-Temperature Brittleness of Steel. II : Correlative Effect of Nitrogen and Phosphorus
- Precipitation Process and Age-Hardenability of Austenitic Fe-Co-Cr-Ni Base Heat-Resisting Alloys
- Phase Translation in Hadfield Steel Isothermally Heated at 500℃ after Solution Treatment
- Anomaly in Dilatation on Heating of Cold-worked 18-8 Stainless Steel
- Corrosion and Erosion of Ferritic Steel by Liquid Bismuth
- Sub-Zero Treatment of Quenched Steel. II : Effect of the Addition of Small Amount of Elements on the Stabilization of Retained Austenite
- Nitrogen as an Alloying Element in Steel : Effect of Nitrogen on Quench-Aging of Steels
- Nitrogen as Alloying Element in Steels. II : On the Effect of Nitrogen on Blue-Brittleness in Steels
- ε-phase Formation in Solution-Treated and Heated Hadfield Steel
- Heat-Treatment of Forged Roll Steel
- Sub Zero Treatment of Quenched Steel. III : Effect of Aging on the Stabilization of Retained Austenite
- Sintered Intermetallic Compound NiAl as High Temperature Material. II
- Study on Sintering Process of Titanium Carbide by Measuring the Change in Electrical Resistivity
- New Oxidizing Method for Revealing Austenitic Grain
- A Study on the Dispersion-Strengthened Steel
- An Investigation on Isothermal Transformation in Steels. I : The Cause of Modification of S-Curves of Some Alloy Steels
- Sintered Intermetallic Compound NiAl as High Temperature Material. I
- An Investigation on Boron-Treated Steels. I : On the Hardenability of Boron-Treated Medium-Carbon Steels, especially the Effect of Nitrogen-Content in Steels
- Carbide precipitation by Heating High-Manganese Steel after Solution Treatment
- Nitrogen as an Alloying Element in Steels : The Effect of Nitrogen on the Tempering of Cold-Worked Steels
- On the Mechanism of Boron Hardenability