TEM Observation of the Reduction of Wustite by Hydrogen Ion Implantation
スポンサーリンク
概要
- 論文の詳細を見る
The reduction process during hydrogen ion implantation into FeO (wustite) has been investigated by using a dual ion beam accelerator interfaced with a high voltage electron microscope (HVEM). Radiation damage and precipitates, which were generated during the hydrogen ion implantation were observed. The precipitates were generated by the reduction of wustite. The small precipitates had an orientation relationship with the wustite matrix while large precipitates became free from restrictions of the matrix.
- 社団法人 日本鉄鋼協会の論文
- 2004-12-15
著者
-
WATANABE Yoshimi
Department of Engineering Physics, Electronics and Mechanics Graduate School of Engineering, Nagoya
-
FURUYA Kazuo
National Research Institute for Metals
-
Ishikawa Nobuhiro
High Voltage Electron Microscopy Station National Institute Of Materials Science
-
Ishikawa Nobuhiro
National Institute For Materials Science
-
Furuya Kazuo
National Institute For Materials Science
-
Furuya Kazuo
High Voltage Electron Microscopy Station National Institute For Materials Science
-
MITSUISHI Kazutaka
National Institute for Materials Science
-
INAMI Takashi
Faculty of Engineering, Ibaraki University
-
SONG Mingui
National Institute for Materials Science
-
Furuya K
National Institute For Materials Science
-
Inami T
Faculty Of Engineering Ibaraki University
-
Inami Takashi
Faculty Of Engineering Ibaraki University
-
Watanabe Yoshimi
Omohi Coll. Graduate School Of Engineering Nagoya Inst. Of Technol.
-
Watanabe Y
Shinshu University Department Of Functional Machinery And Mechanics
-
Watanabe Yoshimi
Omohi College Graduate School Of Engineering Nagoya Institute Of Technology
-
Watanabe Yoshimi
Department Of Functional Machinery And Mechanics Shinshu University
-
Watanabe Yoshimi
Department Of Engineering Physics Electronics And Mechanics Graduate School Of Engineering Nagoya In
-
Watanabe Yoshimi
Dept. Of Functional Machinery & Mechanics Shinshu University
-
Watanabe Yoshimi
Center For Advanced Materials Lawrence Berkeley National Laboratory And The Department Of Materials
関連論文
- Wear Properties of Intermetallic Compound Reinforced Functionally Graded Materials Fabricated by Centrifugal Solid-particle and In-Situ Methods
- Density and Hardness Gradients of Functionally Graded Material Ring Fabricated from Al-3mass%Cu Alloy by a Centrifugal In-Situ Method
- Functionally Graded Material Fabricated by a Centrifugal Method from ZK60A Magnesium Alloy
- Biodegradability of Poly (L-lactic Acid) Functionally Graded Materials with Hardness Gradient
- Novel Recycling System of Aluminum and Iron Wastes-in-situ Al-Al_3Fe Functionally Graded Material Manufactured by a Centrifugal Method
- Cyclic Deformation and Development of Dislocation Structures in a Centrifugally Cast Al-Al_3Ti of Functionally Graded Material
- Practical Performance of Energy-Dispersive X-Ray Spectroscopy with a High-Voltage TEM up to 1,000kV
- Effect of Precipitation of σ-Phase and N Addition on the Mechanical Properties in 25Cr-7Ni-4Mo-2W Super Duplex Stainless Steel
- Self-Assembly of Symmetric GaAs Quantum Dots on (111)A Substrates : Suppression of Fine-Structure Splitting
- Carbon Nanostructure on a Tungsten Needle Tip Formed by Electron Beam Induced Deposition and Its Graphitization through Resistive Heating
- Effects of Heat Treatment on Electric Properties of Nanorods Formed by Electron Beam-Induced Deposition
- Nanodot and Nanorod Formation in Electron-Beam-Induced Deposition Using Iron Carbonyl
- Fabrication of Free-Standing Tungsten-Nanowhiskers on SiO_2 Substrates with Electron-Beam Induced Deposition
- Fabrication and Characterization of Self-Standing W-Nanodendrites on Insulator SiO_2 Substrate by Electron-Beam-Induced Deposition under HVTEM
- Electron microscopy observation of interface in diffusion-bonded copper joint
- Detection of iron-oxide layer on the surface of iron nitride using high-resolution electron microscopy and Fourier filtering
- Effect of Mg on the Sintering of Al-Mg Alloy Powders by Pulse Electric-Current Sintering Process
- Behavior of Oxide Film at Interface between Particles of Al-Mg Alloy Powder Compacts Prepared by Pulse Electric Current Sintering
- TEM Observation of Interfaces between Particles in Al-Mg Alloy Powder Compacts Prepared by Pulse Electric Current Sintering
- 625 Effect of Magnesium on Properties of Aluminum-Magnesium Alloy Powder Compacts by Spark Plasma Sintering
- Effect of Interface Behavior between Particles on Properties of Pure Al Powder Compacts by Spark Plasma Sintering
- In-situ, analytical, high-voltage and high-resolution transmission electron microscopy of Xe ion implantation into Al
- Xe precipitates at grain boundaries in Al under 1 MeV electron irradiation
- High-resolution electron microscopy study of defect structures in γ-TiAl irradiated with 15 keV He ions in a high-voltage transmission electron microscope
- Development of a stage-scanning system for high-resolution confocal STEM
- Sample preparation of GaN-based materials on a sapphire substrate for STEM analysis
- Nanostructure fabrication by electron-beam-induced deposition with metal carbonyl precursor and water vapor (Special issue: Microprocesses & nanotechnology)
- Proximity Effect in Electron-Beam-Induced Deposition
- Relationship between X-ray Intensity and Electric Bias on Al_2O_3 Surface during Low Energy Ga^+ Irradiation
- Morphology of Iron Silicide Nanorods Formed by Electron-Beam-Induced Deposition Using Ultrahigh-Vacuum Transmission Electron Microscope
- Fabrication of Alpha-Iron and Iron Carbide Nanostructures by Electron-Beam Induced Chemical Vapor Deposition and Postdeposition Heat Treatment
- Resolution in New Nanofabrication Technique Combining Electron-Beam-Induced Deposition and Low-Energy Ion Milling
- Characterization Investigation of β-FeSi_2 Semiconductor by In Situ Ultrahigh-Vacuum Transmission Electron Microscopy
- High-resolution transmission electron microscopy observation of the cross-sectional structure of reconstructed silicon (5,5,12) surface
- New scheme for calculation of annular dark-field STEM image including both elastically diffracted and TDS waves
- Growth Manner of Intermetallic Compounds at the Weld Interface of Steel/Aluminum Alloy Lap Joint Fabricated by a Defocused Laser Beam
- Experimental Study on Magnetic Torque Measurement to Estimate Fiber Orientation in Fe-Fiber-Reinforced Composites
- In-situ Observation of the Reduction of Iron Oxides by Solid State Carbon in TEM
- Gold Seed Arrangement on Nanoporous Anodic Aluminum Oxide Membrane by Centrifugal Force
- TEM Observation of the Reduction of Wustite by Hydrogen Ion Implantation
- Fabrication and investigation of tungsten deposit on top and bottom surfaces of thin film substrate (Special issue: Microprocesses & nanotechnology)
- Crystallization of Focused-Electron-Beam Deposited Tungsten Wire on Molybdenum Substrate
- Modeling the Process of Electron-Beam-Induced Deposition by Dynamic Monte Carlo Simulation
- Effects of SiO_2 and Al_2O_3 on the Lattice Parameter and CO Gas Reduction of CaO-containing Dense Wustite
- Finite Element Analysis of Severe Plastic Deformation of Difficult-to-Work Material by Equal-Channel Angular Pressing at Ambient Temperature
- Structure Study of Si Nanocrystals Formed by Electron-Induced Reduction of SiO_2 at High Temperature
- High Resolution Transmission Electron Microscopy Study on the Structure of Ge Nanoparticles by Using an Ultrahigh Vacuum-Molecular Beam Epitaxy-Transmission Electron Microscope System
- Fabrication of Al/Al3Ti Functionally Graded Materials by Reaction Centrifugal Mixed-Powder Method
- Thermal Stability of Nanocrystalline Gold Studied by X-ray Diffraction Method
- Fabrication of Magnetically Graded Material by Rolling Deformation of Wedge-shaped 304 Stainless Steel
- Temperature effect on ion irradiation-induced phase transformation in 304 stainless steel (Eighth Conference on Frontiers of Electron Microscopy in Materials Science)
- Mechanical Properties and Thermal Stability of Nanocrystalline Gold Prepared by Gas Deposition Method
- In-situ Observation of Focused Ion Beam Micropatterns on Semiconductors and Insulators
- Lattice Parameter and Redox Equilibria in CaO-containing Wustite
- Effect of Magnetic Field on Weld Zone by Spot-welding in Stainless Steel
- Martensitic Transformation of Antiferro-magnetic Fe Particles Embedded in a Cu Matrix in a Magnetic Field
- In-situ Observation of Butterfly-type Martensite in Fe-30mass%Ni Alloy during Tensile Test Using High-resolution EBSD
- In Situ Microlithography of Si and GaAs by a Focused Ion Beam in a 200keV TEM
- Electron-Beam-Induced Deposition of Fe Nanoparticles and Thin Films on SrTiO3 Substrates
- Enhanced Mechanical Properties of Fe-Mn-Si-Cr Shape Memory Fiber/Plaster Smart Composite
- Use of Recycled Steel Machining Chips and Aluminum Can Shreds for Synthesizing Iron Aluminide Intermetallic Alloys
- HRTEM observation of BN films segregated on stainless steel SUS304 by low temperature heat treatment (Eighth Conference on Frontiers of Electron Microscopy in Materials Science)
- Effects of Dispersoids on Wear Behavior of Cu-Based Nanocomposite Containing SiO Nanoparticles (Special Issue : Advanced Plasma Science and Its Applications for Nitrides and Nanomaterials)
- W07I Smart Materials by Fiber Science and Textile Technology(International Workshop on "New Frontiers of Smart Materials and Structural Systems")
- Fabrication and Investigation of Tungsten Deposit on Top and Bottom Surfaces of Thin Film Substrate
- Crystallization of Focused-Electron-Beam Deposited Tungsten Wire on Molybdenum Substrate
- Modeling the Process of Electron-Beam-Induced Deposition by Dynamic Monte Carlo Simulation
- Resolution in New Nanofabrication Technique Combining Electron-Beam-Induced Deposition and Low-Energy Ion Milling
- Experimental Study on Severe Plastic Deformation of Ti by Novel Equal-Channel Angular Pressing
- Production of Various Carbon Nanoclusters by Impact Reaction Using Light-Gas Gun as Simulation of Asteroid Collisions in Space
- Heterogeneous Nucleation of Pure Magnesium on Al3Ti, TiC, TiB2, and AlB2 Particles
- Experimental Study on Magnetic Torque Measurement to Estimate Fiber Orientation in Fe-Fiber-Reinforced Composites
- Behavior of Oxide Film at Interface between Particles of Al-Mg Alloy Powder Compacts Prepared by Pulse Electric Current Sintering
- Mechanisms of Crystalline Iron Oxide Formation in Electron Beam-Induced Deposition
- Nanodot and Nanorod Formation in Electron-Beam-Induced Deposition Using Iron Carbonyl
- Structural Investigation of Sputter-Induced Graphite Nanoneedle Field Emitters
- Fabrication of Alpha-Iron and Iron Carbide Nanostructures by Electron-Beam Induced Chemical Vapor Deposition and Postdeposition Heat Treatment
- Cross-sectional Transmission Electron Microscopy and Optical Characterization of Gold Nanoislands
- Martensitic Transformation and Shear Deformation Examined by In-situ Experiments in a HVEM.
- Magnetic Anisotropy Caused by the Formation of Stress-induced Martensite in Small Iron Particles in a Copper Matrix.