Soft X-ray Conversion Efficiencies in Laser-Produced Xenon and Tin Plasmas in a 5--17 nm Wavelength Range
スポンサーリンク
概要
- 論文の詳細を見る
Soft X-ray conversion efficiencies in a 5--17 nm wavelength range in xenon and tin plasmas produced by a 1.06 μm Q-switched neodymium-doped yttrium aluminum garnet laser were investigated. They were measured to be 25 and 20% for the xenon and tin plasmas, respectively at a laser intensity of about $2\times 10^{10}$ W/cm2. These results indicate that a stand-alone soft X-ray source using a laser-produced xenon or tin plasma is useful for various applications that require intense, soft X-ray photons in a wide wavelength range.
- 2011-09-25
著者
-
Amano Sho
Laboratory Of Advanced Science And Technolgy For Industory Himeji Institute Of Technology
-
Miyamoto Shuji
Laboratory Of Advanced Science And Technology For Industry (lasti) University Of Hyogo
-
Mochizuki Takayasu
Laboratory Of Advanced Science And Technolgy For Industory Himeji Institute Of Technology
-
Watanabe Takeo
Laboratory Of Advanced Science And Technology For Industry University Of Hyogo
-
Kanda Kazuhiro
Laboratory of Advanced Science and Technology for Industry (LASTI), University of Hyogo, Kamigori, Hyogo 678-1205, Japan
-
Kanda Kazuhiro
Laboratory of Advanced Science and Technology for Industry, University of Hyogo, Kamigori, Hyogo 678-1205, Japan
-
Inoue Tomoaki
Laboratory of Advanced Science and Technology for Industry, University of Hyogo, Kamigori, Hyogo 678-1205, Japan
-
Mochizuki Takayasu
Laboratory of Advanced Science and Technology for Industry, University of Hyogo, Kamigori, Hyogo 678-1205, Japan
-
Amano Sho
Laboratory of Advanced Science and Technology for Industry, University of Hyogo, Kamigori, Hyogo 678-1205, Japan
関連論文
- Influence of Laser Plasma Soft X-Ray Irradiation on Crystallization of a-Si Film by Infrared Furnace Annealing
- Characterization of Fast Ion and Neutral Debris from Laser-Produced Lithium Plasmas
- Performance of Plasma Erosion Opening Switches in High Voltage Pulsed Power Compression
- Jet Formation and Application for Inertial Confinement Fusion Target
- Experimental Study of Alternative Implosion Concepts for Particle Beam ICF
- Performance of a Diverged Electron Beam Ion Diode
- Simulation Study of the Multi-Species Ion Plasma Interacting with an Ultra Intense Laser
- Performance of Radial Focus Applied-B Ion Diode on a Coaxial Pulse Power Machine
- New Scheme of Cannonball Target Driven by Ion Beam
- Light Ion Beam Transport in a Multi-Plasma Channel System
- Ring-Field Extreme Ultraviolet Exposure System Using Aspherical Mirrors
- Application of Nondiffracting Laser Beam to Laser Compton Scattering
- Novel Evaluation System for Extreme Ultraviolet Lithography Resist in NewSUBARU
- Direct Etching of Spin-on-Glass Films Exposed Using Synchrotron Radiation
- Human Skeletal Muscle Contractile Properties Assessed by Mechanomyogram during Experimentally-induced Hypothermia and Muscle Fatigue
- Contrast Measurement of Reflection Masks Fabricated from Cr and Ta Absorbers for Extreme Ultraviolet Lithography
- Fine Pattern Replication Using ETS-1 Three-Aspherical Mirror Imaging System
- Liner Implosion Experiments with a Pipe Foam Target on Pulsed Power Transformer : Nuclear Science, Plasmas and Electric Discharges
- Design of Laser-Excited Needle-RF-Gun
- Iodine Transmutation through Laser Compton Scattering Gamma Rays
- Smith-Purcell Radiation with Three-Dimensional Simulation
- Experiment of Photonuclear Reaction Induced by Laser Compton Scattering Gamma-Ray
- Spatial Distribution of Polarized Gamma Ray Generated Through Laser Compton Scattering on New SUBARU Storage Ring
- Enhanced Quantum Efficiency of Photocathode under High Electric Field
- Soft X-Ray Spectra from Laser-Heated Cryogenic Rare-Gas Targets
- Highly Excited States of Cyanogen Halides in the Extreme Vacuum Ultraviolet Region
- High-Crder Harmonic Generation in Dense Plasmas with a High Inensity Light Field
- Research Activity on Development and Application of LIGA Technology at New SUBARU, 1.5 GeV Synchrotron Radiation Facility
- Structural Changes in Diamond-Like Carbon Films Fabricated by Ga Focused-Ion-Beam-Assisted Deposition Caused by Annealing
- Super High Voltage System for Ion Beam Inertial Confinement Fusion
- Fabrication of Aspherical Mirrors for Extreme Ultra-Violet Lithography (EUVL) Using Deposition Techniques
- A Novel Design of Three-Aspherical-Mirror Imaging Optics for Extreme Ultra-Violet Lithography
- Soft X-ray Conversion Efficiencies in Laser-Produced Xenon and Tin Plasmas in a 5--17 nm Wavelength Range
- Inhibition of Electrochemical Fouling against Biomolecules on a Diamond-Like Carbon Electrode
- Study on Critical Dimension of Printable Phase Defects Using an Extreme Ultraviolet Microscope: II. Definition of Printable Threshold Region for Hole-Pit Programmed Defects
- A Novel Design of Three-Aspherical-Mirror Imaging Optics for Extreme Ultra-Violet Lithography
- Pulse Power Compression by Fast Opening Switch
- Image Relaying in a High-Average-Power Slab Laser System
- Photonuclear Reaction of Iodine-129 with Laser-Compton Scattering Gamma-Rays Using Nd:YVO_4 Laser and Electron Storage Ring
- Evaluating the Optical Index of Ta and Ta-Based Absorbers for an Extreme Ultraviolet Mask Using Extreme Ultraviolet Reflectometry
- Effect of Laser Plasma X-ray Irradiation on Nucleation in Amorphous Silicon Film
- Resonant Photonuclear Reactions for Isotope Transmutation
- Outgassing Characteristics of Low-Molecular-Weight Resists for Extreme Ultraviolet Lithography
- A Multilayer-Coated Reflection Mirror for Microfabrication
- Effect of Laser-Plasma X-Ray Irradiation on Crystallization of Amorphous Silicon Film by Excimer Laser Annealing
- Optimization of Photoacid Generator in Photoacid Generation-Bonded Resist
- Near Edge X-Ray Absorption Fine Structure Study for Optimization of Hard Diamond-Like Carbon Film Formation with Ar Cluster Ion Beam
- Thermal Durability of Diamond Like Carbon Films Containing Tungsten Fabricated by Focused-Ion-Beam Chemical Vapor Deposition
- Annealing Effect of W Incorporated Diamond-Like Carbon Fabricated by Ga Focused Ion Beam Chemical Vapor Deposition
- Effect of the Soft X-rays on Highly Hydrogenated Diamond-Like Carbon Films
- In-situ Contamination Thickness Measurement by Novel Resist Evaluation System at NewSUBARU
- Dual Grating Interferometric Lithography for 22-nm Node
- Development of Low Line Edge Roughness and Highly Sensitive Resist for Extreme Ultraviolet Lithography
- Fabrication of Poly(tetrafluoroethylene) Microparts by High-Energy X-ray-Induced Etching
- Transmission Grating Fabrication for Replicating Resist Patterns of 20 nm and Below
- Direct Evaluation of Surface Roughness of Substrate and Interfacial Roughness in Molybdenum/Silicon Multilayers Using Extreme Ultraviolet Reflectometer
- Study of Critical Dimensions of Printable Phase Defects Using an Extreme Ultraviolet Microscope
- Phase Defect Observation Using Extreme Ultraviolet Microscope
- Resolution Enhancement of Extreme Ultraviolet Microscope Using an Extreme Ultraviolet Beam Splitter
- Actinic Mask Inspection Using an EUV Microscope —Preparation of a Mirau Interferometer for Phase-Defect Detection—
- Confocal Multipath Laser Cavity to Enhance Compton Backscattering
- Extreme Ultraviolet Resist Development at the University of Hyogo
- Experimental Results Obtained using Extreme Ultraviolet Laboratory Tool at New SUBARU
- Cleaning Characteristics of Contaminated Imaging Optics Using 172 nm Radiation
- Development of Fast-Photospeed Chemically Amplified Resist in Extreme Ultraviolet Lithography
- Reducing off Hydrocarbon Contaminants for EUVL
- Resist Outgassing Characteristics in Extreme Ultraviolet Lithography
- Surface Modification of Poly(tetrafluoroethylene) by Synchrotron Radiation Exposure under Several Kinds of Gas Atmosphere
- Surface Modification of Fluorocarbon Polymers by Synchrotron Radiation
- At-Wavelength Extreme Ultraviolet Lithography Mask Observation Using a High-Magnification Objective with Three Multilayer Mirrors
- Development of Nanometer Resolution Focus Detector in Vacuum for Extreme Ultraviolet Microscope