Proximity Effect on Patterning Characteristics of Hole Patterns in Synchrotron Radiation Lithography
スポンサーリンク
概要
- 論文の詳細を見る
This paper reports the results of analyzing the proximity effect on the patterning characteristics for plural neighboring hole patterns in synchrotron radiation lithography. Fresnel diffraction simulation was used and pattern replication experiments were performed with pattern pitch, proximity gap, and mask contrast as parameters. Even when the pattern pitch (hole:space) is 1:1, pattern sizes down to 0.2 μm can be replicated with a large dose margin under a large proximity gap condition up to 40 μm, irrespective of the mask contrast. A low-contrast (2.5) mask has an advantage over the conventional-contrast (7) mask in that it allows the use of a larger proximity gap when replicating hole patterns with a size of 0.1-0.2 μm. Moreover, the phase-shifting mask we previously proposed improves the exposure latitude and widens the proximity gap, so that it is possible to use a 20-μm gap to replicate 0.1-μm hole patterns for a pitch of 1:1 and to use a 30-μm gap for a pitch of 1:2.
- 社団法人応用物理学会の論文
- 1994-10-15
著者
-
DEGUCHI Kimiyoshi
NTT LSI Laboratories
-
SOMEMURA Yoh
NTT LSI Laboratories
-
Somemura Y
Ntt Lsi Laboratories
-
Deguchi K
Department Of Electronics And Information Systems Osaka University
-
Miyoshi K
Ulsi Device Development Laboratory Nec Corporation
-
MIYOSHI Kazunori
NTT LSI Laboratories
関連論文
- Spectroscopic Study of Rapid Mixing and Cooling of a High-Density He Plasma Flow Penetrating into Hydrogen Gas
- Trap Density Dependent Inelastic Tunneling in Stress-Induced Leakage Current
- Trap Density Dependent Inelastic Tunneling in Stress-Induced Leakage Current
- Sub-100-nm Device Fabrication using Proximity X-Ray Lithography at Five Levels
- Patterning Yield of Sub-100-nm Holes Limited by Fluctuation of Exposure and Development Reactions in Synchrotron Radiation Lithography Using Biased Mask Patterns
- Lithographic Performance of a Chemically Amplified Resist Developed for Synchrotron Radiation Lithography in the Sub-100-nm Region
- Reduction of Image Shortening in Two-Dimensional Pattern Replication Using X-Ray Lithography
- Dissolution Characteristics and Surface Morphology of Chemically Amplified Resists in X-Ray Lithography
- Phantom Exposure of Chemically Amplified Resist in KrF Excimer Laser Lithography
- Effects of photo- and Auger Electron Scattering on Resolution and Linewidth Control in SR Lithography : Lithography Technology