Characteristics of Organic Light Emitting Diodes with Tetrakis(Ethylmethylamino) Hafnium Treated Indium Tin Oxide
スポンサーリンク
概要
- 論文の詳細を見る
The surface of indium tin oxide (ITO) in organic light emitting diodes (OLEDs) was treated using an atomic layer deposition with tetrakis(ethylmethylamino) hafnium (TEMAH) and O2 precursors. The treatment for 5 cycles at room temperature resulted in a significant improvement in the electroluminescent characteristics resulting from the increased hole injection. According to the various characterizations, an ultra-thin HfOx layer without any insulating properties was formed, which modified the electronic band structure of the ITO anode. When the number of cycles or temperature was increased, an electrically insulating HfOx was formed, and the resulting OLED properties deteriorated.
- 2007-05-25
著者
-
Jung Donggeun
Department Of Physics And Institute Of Basic Science Sungkyunkwan University
-
Sohn Sunyoung
Department Of Physics Institute Of Basic Science And Brain Korea 21 Physics Research Division Sungky
-
Yi Junsin
School Of Electrical And Computer Engineering Sungkyunkwan University
-
Boo Jin-hyo
Department Of Chemistry Bk21 School Of Chemical Materials Science Sungkyunkwan University
-
Kim Hyoungsub
School Of Advanced Materials Science And Engineering Sungkyunkwan University
-
Chae Heeyeop
Department Of Chemical Engineering Sungkyunkwan University
-
Cho Mann-ho
Institute of Physics and Applied Physics, Yonsei University, 134 Shinchon-Dong, Seodaemun-Ku, Seoul 120-729, Republic of Korea
-
Park Keunhee
Department of Physics, Institute of Basic Science, and Brain Korea 21 Physics Research Division, Sungkyunkwan University, Suwon 440-746, Republic of Korea
-
Kim Hyunmin
School of Information and Communication Engineering, Sungkyunkwan University, Suwon 440-746, Republic of Korea
-
Park Keunhee
Department of Physics, Institute of Basic Science, and Brain Korea 21 Physics Research Division, Sungkyunkwan University, Suwon 440-746, Korea
-
Boo Jin-Hyo
Department of Chemistry and Institute of Basic Science, Sungkyunkwan University, Suwon 440-746, Korea
-
Boo Jin-hyo
Department of Chemistry, Institute of Basic Science, and Brain Korea 21 Chemistry Research Division, Sungkyunkwan University, Suwon 440-746, Republic of Korea
-
Yi Junsin
School of Information and Communication Engineering, Sungkyunkwan University, Suwon 440-746, Republic of Korea
-
Sohn Sunyoung
Department of Electronics Engineering, Catholic University of Daegu, Gyeongsan, Gyeongbuk 712-702, Republic of Korea
-
Jung Donggeun
Department of Physics, Institute of Basic Science, and Brain Korea 21 Physics Research Division, Sungkyunkwan University, Suwon 440-746, Republic of Korea
-
Kim Hyoungsub
School of Advanced Materials Science and Engineering, Sungkyunkwan University, Suwon 440-746, Republic of Korea
-
Chae Heeyeop
Department of Chemical Engineering, Sungkyunkwan University, Suwon 440-746, Republic of Korea
関連論文
- Photoluminescence and Electroluminescence from Polymer-Like Organic Thin Films Deposited by Plasma-Enhanced Chemical Vapor Deposition Using Para-Xylene as Precursor
- Formation of Reliable HfO_2/HfSi_xO_y Gate-Dielectric for Metal-Oxide-Semiconductor Devices
- Properties of HfO_2/Hf-Silicate/Si Structures with Hf-Silicate Formed by Hf Metal Deposition and Subsequent Reaction : Electrical Properties of Condensed Matter
- Structural and electrical properties of HfO_2/Hf-silicate/Si structures by rf magnetron sputtering
- Structural and electrical properties of HfO_2/Hf-silicate/Si structures by rf magnetron sputtering
- Relationship between C=C Bonds and Mechanical Properties of Carbon Rich Low-k Films deposited by Plasma Enhanced Chemical Vapor Deposition
- The Hysteresis Caused by Interface Trap and Anomalous Positive Charge in Al/CeO_2-SiO_2/Silicon Capacitors
- Diffusion Barrier Characteristics of Hf(C, N) Thin Films Deposited by Plasma Enhanced Metal Organic Chemical Vapor Deposition for Cu Metallization
- Characteristics under Bias-Temperature-Stress of Cu/Low-k a-SiCO: H Structures Prepared by Plasma Enhanced Chemical Vapor Deposition Using a Hexamethyldisilane Precursor and Cu Sputtering
- Effects of Post-Deposition Heat Treatment on the Properties of Low Dielectric Constant Plasma Polymerized Decahydronaphthalene Thin Films Deposited by Plasma-Enhanced Chemical Vapor Deposition
- Lifetime property of flexible organic light emitting diodes with plasma polymer barrier layers
- Effects of N_2 Plasma Treatment of the Al Bottom Cathode on the Characteristics of Top-Emission-Inverted Organic-Light-Emitting Diodes
- Effects of NH_3 Plasma Treatment of the Substrate on Metal Organic Chemical Vapor Deposition of Copper Films
- Enhancement of Selective Chemical Vapor Deposition of Copper by Nitrogen Plasma Pretreatment
- Effect of Annealing Temperature on Dielectric Constant and Bonding Structure of Low-k SiCOH Thin Films Deposited by Plasma Enhanced Chemical Vapor Deposition
- Characteristics of polymer light emitting diodes with the LiF anode interfacial layer
- Properties of Low-k (k-2.05) Plasma Polymer Films Deposited by PECVD Using Decamethyl-cyclopentasiloxane and Cyclohexane as the Precursors
- Properties of Low-k (k-2.05) Plasma Polymer Films Deposited by PECVD Using Decamethyl-cyclopentasiloxane and Cyclohexane as the Precursors
- Effects of Deposition Pressure on the Properties of a Low-Dielectric Constant Cyclohexane-based Plasma Polymer
- Optical Properties of Polymer-like Organic Thin Films Deposited by Plasma-Enhanced Chemical Vapor Deposition Using Toluene as the Precursor
- Polymer-like Organic Thin Films Deposited by Plasma Enhanced Chemical Vapor Deposition Using the Para-xylene Precursor as Low Dielectric Constant Interlayer Dielectrics for Multilevel Metallization
- Characteristics of Copper Diffusion into Low Dielectric Constant Plasma Polymerized Cyclohexane Thin Films
- Highly Ordered Mesoporous α-Mn_2O_3 for Catalytic Decomposition of H_2O_2 at Low Temperatures
- Ba(Zr_ Ti)O_3 Thin Films Deposited by RF-Magnetron Sputtering for High Dielectric Constant Material Applications
- Ba(Zr_Ti_)O_3 Thin Films Deposited by RF-Magnetron Sputtering for High Dielectric Constant Material Applications
- Pt and RuO_2 Bottom Electrode Effects on Pb(Zr,Ti)O_3 Memory Capacitors
- Electronic and Optical Properties of Indium Zinc Oxide Thin Films Prepared by Using Nanopowder Target
- Study of the Characteristics of Organic Thin Film Transistors with Plasma-Polymer Gate Dielectrics
- Surface Plasma Treatment of Polyimide Film for Cu Metallization
- Structural, Electrical, and Optical Properties of SnO2:Sb Films Prepared on Flexible Substrate at Room Temperature
- Effects of Substrate Heating on the Amorphous Structure of InGaZnO Films and the Electrical Properties of Their Thin Film Transistors
- Passivation of Organic Light-Emitting Diodes by the Plasma Polymerized para-Xylene Thin Film : Atoms, Molecules, and Chemical Physics
- Effect of Series Resistance on Field-Effect Mobility at Varying Channel Lengths and Investigation into the Enhancement of Source/Drain Metallized Thin-Film Transistor Characteristics
- Thickness Dependent Dielectric Property of BaTiO3/SrTiO3 Artificial Lattice
- Thin Film Transistor Using Amorphous InGaZnO Films as Both Channel and Source/Drain Electrodes
- SiNx Double Layer Antireflection Coating by Plasma-Enhanced Chemical Vapor Deposition for Single Crystalline Silicon Solar Cells
- Etching Characteristics of ZnO and Al-Doped ZnO in Inductively Coupled Cl2/CH4/H2/Ar and BCl3/CH4/H2/Ar Plasmas
- Hydrogenated Amorphous Silicon Layer Formation by Inductively Coupled Plasma Chemical Vapor Deposition and Its Application for Surface Passivation of p-Type Crystalline Silicon
- Organic Solar Cells with Hydrogenated In-Doped ZnO Replacing Sn-Doped In2O3 as Transparent Electrode
- Characteristics of Polymer Light Emitting Diodes with the LiF Anode Interfacial Layer
- Characteristics of Organic Light Emitting Diodes with Tetrakis(Ethylmethylamino) Hafnium Treated Indium Tin Oxide
- Investigation of Aluminum Metallized Source/Drain Thin Film Transistors Using a Self-Aligned Fabrication Process
- Surface Modification of Plasma Polymer Thin Films for DNA Fixation by Atmospheric Pressure Plasma Treatment (Special Issue : Dry Process)
- Effects of Deposition Plasma Power on Properties of Low Dielectric-Constant Plasma Polymer Films Deposited Using Hexamethyldisiloxane and 3,3-Dimethyl-1-butene Precursors
- High Mobility P-Channel Thin-Film Transistors with Ultralarge-Grain Polycrystalline Silicon Formed Using Nickel-Induced Crystallization
- Effectiveness of Iodine Termination for Ultrahigh Efficiency Solar Cells as a Means of Chemical Surface Passivation
- Effects of Heating Time and Intermediate Heating on Sol--Gel-Processed ZrO2 Thin Films
- Enhanced Optical and Electrical Properties of Inorganic Electroluminescent Devices Using the Top-Emission Structure
- Inverted Bottom-Emission Polymer Light-Emitting Devices Doped with Organic Salt
- Homogeneous Al
- Improvement on the Electron Transfer of Dye-Sensitized Solar Cell Using Vanadium Doped TiO
- Screen-Printed Polymer:Fullerene Bulk-Heterojunction Solar Cells