位置決め機構の物理パラメータの一同定方法

概要

論文の詳細を見る
The positioning mechanism can be regarded as a simple vibration system with one degree of freedom. Generally speaking, it is difficult to identify the physical parameters of this mechanism without decomposing. In this paper, an identification method of physical parameters for positioning mechanism is described. Firstly it is shown that the viscous damping of slide mechanism can be derived by measuring the frequency response from the collocated sensor to the non-collocated sensor. Moreover, the spring constant between the mechanisms also can be derived more accurately in comparison with the value based on the impulse response. Secondary the equivalent viscous damping is calculated by means of the constant velocity test or the frequency response. Then the viscous damping of rotational mechanism may easily be derived by subtracting the converted viscous damping, which is the value of slide mechanism at the position of motor axis, from the equivalent viscous damping. Finally, the proposed identification method is applied to an actual positioning mechanism.
公益社団法人精密工学会の論文
1994-02-05