The Influence of the Bottom Shape of an Agitated Vessel Stirred by Dual Impellers on the Distribution of Solid Concentration
スポンサーリンク
概要
- 論文の詳細を見る
In this study, we quantitatively investigated the influence of the bottom shape of an agitated vessel stirred by dual impellers on the distribution of solid concentration and the optimal bottom shape of the vessel for the dispersion of solid particles was evaluated. Four types of bottom shapes were adopted, including a flat bottom tank (FBT), a profiled bottom tank (PBT), a semi-elliptical bottom tank (EBT) and a cone and fillet tank (CFT). It was found that a good dispersion of solid can be obtained in the order of EBT, PBT, FBT, and CFT at constant power consumption. The CFD simulation conducted in this work also showed that the area of lower velocity zone was small in the same order of EBT, PBT, FBT, and CFT. From the result obtained in this study, it is clarified that the distribution of solid concentration in the vessel is considerably influenced by the local flow formed at the bottom region of the vessel.
- 2007-08-01
著者
-
TAKAHASHI Koji
Department of Pediatrics, Nihon Kokan Hospital
-
KONDO Shin-ichi
Research Center of Production Technology, Zeon Corp.
-
MOTODA Mitsunori
Department of Chemistry and Chemical Engineering, Yamagata University
-
HORIGUCHI Hiro
Department of Chemistry and Chemical Engineering, Yamagata University
-
Horiguchi Hiro
Department Of Chemistry And Chemical Engineering Yamagata University
-
Kondo Shin-ichi
Research Center For Development Of Far-infrared Region Fukui University
-
Motoda Mitsunori
Department Of Chemistry And Chemical Engineering Yamagata University
-
Takahashi Koji
Department Of Chemistry And Chemical Engineering Yamagata University
-
Kondo Shin-ichi
Research Center Of Production Technology Zeon Corp.
-
Takahashi Koji
Department Of Aeronautics And Astronautics Kyushu University
-
TAKAHASHI Koji
Departent of Materials Science and Engineering,Faculty of Engineering,Yamagata University
関連論文
- Asymmetric Reduction of α-Keto Esters and α-Diketones with a Bakers' Yeast Keto Ester Reductase
- Amino Acid Sequence and Characterization of Aldo-keto Reductase from Bakers' Yeast
- Protein Sequences of Two Keto Ester Reductases: Possible Identity as Hypothetical Proteins
- Five cases of thrombocytopenia induced by primary human herpesvirus 6 infection
- The Influence of the Bottom Shape of an Agitated Vessel Stirred by Dual Impellers on the Distribution of Solid Concentration
- Substrate Specificities of Deuterolysin from Aspergillus oryzae and Electron Paramagnetic Resonance Measurement of Cobalt-substituted Deuterolysin(Biochemistry & Molecular Biology)
- Bubble Size Distribution near the Vessel Wall in a Gas Sparged Vessel Agitated by Pitched Blade Paddle Up-Pumping
- Effect of Impeller Blade Angle on Power Consumption and Flow Pattern in Horizontal Stirred Vessel
- Soluble Egg Shell Membrane Protein as a Regulating Material for Collagen Matrix Reconstruction
- Investigation of New Embedding Mediums for Cytochemistry and Immunoelectronmicroscopy.
- RELATION BETWEEN IMPACT VELOCITY OF PARTICLE AND SIZE OF CRATER FORMED ON SOFT SURFACE
- Optical Constants of Quench-Deposited TlCl
- Electrical Properties of Quench-Deposited Amorphous SnTe Films
- Amorphous to Crystalline Transformation of Cold Condensed TlBr Films
- Internal Reflection Method for Measuring Optical Constants of Deposited Films
- Core Absorption Spectra of Crystalline and Amorphous GeTe Thin Films
- Absorption Spectra of Amorphous and Crystalline SnTe Thin Films in the 2-120eV Region
- Amorphous-Crystalline Transformation of SuTe Thin Films
- Purification and Characterization of α-Keto Ester Reductases from Bakers' Yeast
- Differences in Protein Structure and Similarities in Catalytic Function of Two L-Stereoselective Carbonyl Reductases from Bakers' Yeast
- Photocrystallization of Cold Condensed Amorphous TlCl Films Detected by UV Absorption Measurements
- Annealing Behavior of Cold Condensed Amorphous TlCl Films Studied by UV Absorption Measurements
- Theoretical Investigation on Induced Magnetic Moment by Impurity Potential
- 単軸エクストル-ダ-内の異なる形状のピン混合領域における分配混合の2次元解析
- A case of averrant thyroid carcinoma connected with the thyroid by a fibrous band
- D315 A NOVEL FLUIDIC MICROMOTOR DRIVEN BY THERMOCAPILLARY FORCE(Micro-scale phenomena)
- Mixing Time for Different Diameters of Impeller at a High Solid Concentration in an Agitated Vessel
- GI-10 EVALUATION METHOD OF GEAR MEASURING INSTRUMENT USING V-GROOVE ARTIFACT(INSPECTION OF GEARS)
- GI-08 EVALUATION OF GEAR MEASURING INSTRUMENT USING MULTIPLE-TOOTH INVOLUTE HELICOID ARTIFACT(INSPECTION OF GEARS)
- Coloured Petri Net Based Modelling and Analysis of Multiple Product FMS with Resource Breakdowns and Automated Inspection(Concurrent Systems)
- The Modeling and analysis of Guide-path configurations of an integrated Automated guided Vehicle system using Colored Petri Net
- Hierarchical Control Modeling of Automated Guided Vehicle System (AGVS) using Colored Petri Net
- Colored Petri Net based Performance analysis of Flexible Manufacturing System with planned and unplanned Resource Breakdowns
- Colored Petri Net based Performance analysis of Flexible Manufacturing System with planned and unplanned Resource Breakdowns
- Effect of Sorbed Water on the Thermal Stability of Soybean Protein
- Improved Physical and Biochemical Features of a Collagen Membrane by Conjugating with Soluble Egg Shell Membrane Protein
- Contribution of the Net Charge to the Regulatory Effects of Amino Acids and ε-Poly(L-lysine) on the Gelatinization Behavior of Potato Starch Granules
- Interfacial Behavior of Fatty-Acylated Sericin Prepared by Lipase-Catalyzed Solid-Phase Synthesis
- Thermal Behavior of Fowl Feather Keratin
- Stable,Single-Mode Oscillation with High-Order Volume Mode at 1MW,170GHz Gyrotron
- Numerical Simulation of the Flow Field in the Mixing Section of a Screw Extruder by the Lattice Gas Automata Method
- Synthesis and Characterization of Ba β-Diketonate Cormplexes for Chemical Vapor Deposition of Thin-Film Superconductors
- In situ Spectroscopy of Solid-State Chemical Reaction in PbBr_2-Deposited CsBr Crystals
- In situ Spectroscopy of Solid-State Chemical Reaction in PbBr_2-Deposited CsBr Crystals
- Gassed Power Consumption and Gas Hold-up for a Dual Hollow Blade Impeller System in a Stirred Vessel
- Gas Dispersion Characteristics of Newly Developed Impellers in a Stirred Vessel
- A Novel Measurement Technique for Mixing Time in an Aerated Stirred Vessel
- Voltammetric Response of a γ-Irradiated Poly(N-vinylcaprolactam)Modified Graphite Electrode to Catechol and Ascorbic Acid
- Effects of Frequency on the Crack-Healing Behavior of Si_3N_4/SiC Composite under Cyclic Stress(Macro-, Micro-, Meso-, and Nano-scopic Strength of Materials Relating to Microstructures)
- Strongly Enhanced Free-Exciton Luminescence in Microcrystalline CsPbBr_3 Films (Condensed Matter: Electronic Structure, Electrical, Magnetic and Optical Properties)
- Strongly Enhanced Free-Exciton Luminescence in Microcrystalline CsPbBr_3 Films
- Serotonin-immunoreactive Epithelial Cells in the Main Excretory Ducts of Rat Submandibular Glands
- Microheater-Driven Dancing Microbubble
- Functional Changes of Lysozyme by Conjugating with Carboxymethyl Dextran
- Control of Crystal Size Distributions in a Seeded Batch Crystallizer
- EFFECT OF SCALE ON PARTICLE-IMPELLER IMPACT IN AN AGITATED VESSEL EQUIPPED WITH A RUSHTON TURBINE
- PARTICLE-IMPELLER IMPACT IN AN AGITATED VESSEL EQUIPPED WITH A RUSHTON TURBINE
- Increased Hydrophobicity of Carboxymethyl Starch Film by Conjugation with Zein(Food & Nutrition Science)
- Collisional Evolution of Galaxy Clusters and the Growth of Common Halos
- Gas-Liquid Mass Transfer Coefficient of a Pitched Bladed Paddle Up-Pumping at Extraordinary Large Gas Flow Rates
- Development of an Aerobic Cultivation System by Using a Microbubble Aeration Technology
- Theoretical Tool for Optimum Design of Mixer, and Visualization and Quantification of Mixing Performance
- Increase of cytochrome c oxidase negative fibers in rimmed vacuole myopathy with inflammatory changes
- Lactic Acid Fermentation from Rice by Adopting Food Wastes as Nutrients
- Polymerized Structure and Improved Physical and Biochemical Material Properties of Carboxymethyl Dextran-Conjugated Collagen
- Soft Textural and Emulsifiable Gelatin Formed by Conjugating with Fatty-Acylated Saccharide
- Reversible Thermal Transition of Soluble Branched Chains from Slightly Acid-treated Potato Starch
- Mediastinal lymphatic drainage from pulmonary lobe based on CT observations of histoplasmosis : implications for minimal N2 disease of non-small-cell lung cancer
- Improvement of the Physical Properties of Pepsin-Solubilized Elastin-Collagen Film by Crosslinking
- Development of a Lactic Acid Recovery System Using Ammonia from a Fermentation Broth
- Liquefaction for the Lactic Acid Fermentation from Rice
- Flow in a Poppet Valve : Computation of Pressure Distribution using a Streamline Coordinate System
- Amorphous CsPbX_3 versus Crystalline Cs_4PbX_6 (X=Br, Cl)-Their Localized Electronic States Studied by Optical Absorption Spectroscopy
- DEVELOPMENT AND MIXING CHARACTERISTICS OF FOLDING ANCHOR IMPELLER FOR ROUND-BOTTOMED FLASK
- PARTICLE-IMPELLER IMPACT FOR A SIX BLADED 45°PITCHED TURBINE IN AN AGITATED VESSEL
- EFFECT OF PARTICLE-IMPELLER IMPACT RATE ON PROPERTIES OF PRODUCT CRYSTALS IN AGITATED CRYSTALLIZERS OF DIFFERENT SIZES
- Structural Characterization of the Gene for Human Histidine-Rich Glycoprotein, Reinvestigation of the 5'-Terminal Region of cDNA and a Search for the Liver Specific Promoter in the Gene
- Numerical Processing of a Visualized Streak Line Image using a Streamline Coordinate System
- Fabrication of a Microevaporator Equipped with a Piezoelectrically-Driven Diaphragm Pump
- A NEW GROWTH KINETIC MODEL FOR PHOTO-AUTOTROPHIC MICROALGAE CULTURE
- Mass Transfer Characteristics by Surface Aeration of Large Paddle Impeller : Application to a Polymerization Reactor with Liquid Level Change
- Numerical Analysis of an Axisymmetric Jet Using a Streamline Coordinate System
- EFFECT OF SIZE OF SPHERICAL PARTICLE ON COMPLETE SUSPENSION SPEED IN AGITATED VESSELS OF DIFFERENT SCALE
- A STUDY OF THE AGITATION SPEED TO JUST CAUSE COMPLETE SUSPENSION FOR NON-SPHERICAL PARTICLES
- Development of a Simulator for the Fuel Injecton Sysem of a Diesel Engine
- Biotransformation of Isoflavones by the Larvae of the Common Cutworm (Spodoptera litura)
- MIXING OF HIGHLY VISCOUS NEWTONIAN LIQUID IN A HELICAL RIBBON AGITATED VESSEL AT VARIOUS LIQUID DEPTHS
- Control of Collagen Molecular Assembly with Anionic Polysaccharides
- Distribution of Solid Particles Lighter than Liquid in an Agitated Vessel Stirred by Dual Impellers
- 酢酸セルロース-ジルコニア複合ゲル繊維へのウレアーゼの包括固定化
- LOCAL GAS HOLDUP AND GAS RECIRCULATION RATE IN AN AERATED VESSEL EQUIPPED WITH A RUSHTON TURBINE IMPELLER
- Effect of Impeller Blade Angle on Power Consumption and Flow Pattern in Horizontal Stirred Vessel
- Functional Changes of Carboxymethyl Potato Starch by Conjugating with Amino Acids
- Contribution of Charged Amino Acids to Improving the Degraded Viscosity of Potato Starch Paste by a Retort Treatment and during Storage
- Endowed Multi-functionality of Branched Oligosaccharide from Corn Starch by Phosphorylation and Oleylation
- Chaotic Mixing in a Vessel Agitated by Large Impeller
- Regulation of Collagen Matrix Reconstruction by Phosphated Polysaccharides
- Prediction of the Laminar Two-Dimensional Jet Flow through a Convergent Channel
- β-Lactoglobulin Protects β-Ionone Related Compounds from Degradation by Heating,Oxidation, and Irradiation
- Amorphous CsPbX3 versus Crystalline Cs4PbX6 (X=Br, Cl)—Their Localized Electronic States Studied by Optical Absorption Spectroscopy