PARTICLE-IMPELLER IMPACT IN AN AGITATED VESSEL EQUIPPED WITH A RUSHTON TURBINE
スポンサーリンク
概要
- 論文の詳細を見る
Information about the particle impact on mixer geometry is very important in understanding the secondary nucleation in crystallization, but has rarely been investigated. In this work, a method of measuring the rate of particle-impeller impaction was developed. Using this method, the effects of impeller speed, particle properties and solid concentration on the rate and position of impaction were studied.It was found that the rate of impaction depends strongly on each experimental condition studied in this work. The preponderant position where particle-impeller impaction occurred was usually at the outer bottom corner of the blade.
- 社団法人 化学工学会の論文
- 1992-02-20
著者
-
TAKAHASHI Koji
Department of Pediatrics, Nihon Kokan Hospital
-
Takahashi Katsumi
Department Of Chemistry And Chemical Engineering Niigata University
-
YOKOTA TOSHIYUKI
Department of Chemistry and Chemical Engineering, Yamagata University
-
Nomura T
Shinto Scientific Co. Ltd. Tokyo
-
Nomura Toshio
Trinity Lab. Co. Ltd.
-
NOMURA TOSHIO
Shinto Scientific Co. Ltd.,
-
GIDOH Yoshimitsu
Department of Material Science and Engineering, Yamagata University
-
Gidoh Yoshimitsu
Department Of Material Science And Engineering Yamagata University
-
Yokota T
Yamagata Univ. Yonezawa Jpn
-
Yokota Toshiyuki
Department Of Chemistry And Chemical Engineering Faculty Of Engineering Yamagata University
-
Takahashi K
Department Of Chemistry And Chemical Engineering Yamagata University
-
Takahashi Koji
Department Of Chemistry And Chemical Engineering Yamagata University
-
Takahashi Koji
Department Of Aeronautics And Astronautics Kyushu University
-
Nomura Toshio
Shinto Scientfflic Co., Ltd.
-
TAKAHASHI Koji
Departent of Materials Science and Engineering,Faculty of Engineering,Yamagata University
関連論文
- Five cases of thrombocytopenia induced by primary human herpesvirus 6 infection
- The Influence of the Bottom Shape of an Agitated Vessel Stirred by Dual Impellers on the Distribution of Solid Concentration
- Photo-Crosslinked Copolymer Gel as an Adsorbent for Temperature-Swing Adsorption Process
- Effect of Perforated Plate on Concentration of Poly(vinyl Alcohol) by Foam Fractionation with External Reflux
- Temperature-Swing Adsorption of Nonionic Surfactant with Photo-Crosslinked Polymeric Gel
- Disinfection Kinetics of Legionella pneumophila by Hydrogen Peroxide
- Substrate Specificities of Deuterolysin from Aspergillus oryzae and Electron Paramagnetic Resonance Measurement of Cobalt-substituted Deuterolysin(Biochemistry & Molecular Biology)
- Bubble Size Distribution near the Vessel Wall in a Gas Sparged Vessel Agitated by Pitched Blade Paddle Up-Pumping
- Effect of Impeller Blade Angle on Power Consumption and Flow Pattern in Horizontal Stirred Vessel
- Soluble Egg Shell Membrane Protein as a Regulating Material for Collagen Matrix Reconstruction
- Investigation of New Embedding Mediums for Cytochemistry and Immunoelectronmicroscopy.
- RELATION BETWEEN IMPACT VELOCITY OF PARTICLE AND SIZE OF CRATER FORMED ON SOFT SURFACE
- 単軸エクストル-ダ-内の異なる形状のピン混合領域における分配混合の2次元解析
- A case of averrant thyroid carcinoma connected with the thyroid by a fibrous band
- D315 A NOVEL FLUIDIC MICROMOTOR DRIVEN BY THERMOCAPILLARY FORCE(Micro-scale phenomena)
- Mixing Time for Different Diameters of Impeller at a High Solid Concentration in an Agitated Vessel
- GI-10 EVALUATION METHOD OF GEAR MEASURING INSTRUMENT USING V-GROOVE ARTIFACT(INSPECTION OF GEARS)
- GI-08 EVALUATION OF GEAR MEASURING INSTRUMENT USING MULTIPLE-TOOTH INVOLUTE HELICOID ARTIFACT(INSPECTION OF GEARS)
- Coloured Petri Net Based Modelling and Analysis of Multiple Product FMS with Resource Breakdowns and Automated Inspection(Concurrent Systems)
- The Modeling and analysis of Guide-path configurations of an integrated Automated guided Vehicle system using Colored Petri Net
- Hierarchical Control Modeling of Automated Guided Vehicle System (AGVS) using Colored Petri Net
- Colored Petri Net based Performance analysis of Flexible Manufacturing System with planned and unplanned Resource Breakdowns
- Colored Petri Net based Performance analysis of Flexible Manufacturing System with planned and unplanned Resource Breakdowns
- Effect of Sorbed Water on the Thermal Stability of Soybean Protein
- Improved Physical and Biochemical Features of a Collagen Membrane by Conjugating with Soluble Egg Shell Membrane Protein
- Contribution of the Net Charge to the Regulatory Effects of Amino Acids and ε-Poly(L-lysine) on the Gelatinization Behavior of Potato Starch Granules
- Interfacial Behavior of Fatty-Acylated Sericin Prepared by Lipase-Catalyzed Solid-Phase Synthesis
- Thermal Behavior of Fowl Feather Keratin
- Stable,Single-Mode Oscillation with High-Order Volume Mode at 1MW,170GHz Gyrotron
- Numerical Simulation of the Flow Field in the Mixing Section of a Screw Extruder by the Lattice Gas Automata Method
- Gelling Properties of Soybean β-Conglycinin Having Different Subunit Compositions
- Synthesis and Characterization of Ba β-Diketonate Cormplexes for Chemical Vapor Deposition of Thin-Film Superconductors
- Freeze-Drying of Copper-Oxide-Based Porous Bulk Catalysts for Diesel Soot Combustion
- Processing of Porous Metal Oxide Particles for Combustion Catalysis by Freeze-drying
- A Growth Kinetics Model of Euglena gracilis in Fed-batch Mixotrophic Culture
- Performance of a Shaking Vessel-Type Bioreactor with a Current Pole
- Gassed Power Consumption and Gas Hold-up for a Dual Hollow Blade Impeller System in a Stirred Vessel
- Gas Dispersion Characteristics of Newly Developed Impellers in a Stirred Vessel
- A Novel Measurement Technique for Mixing Time in an Aerated Stirred Vessel
- Voltammetric Response of a γ-Irradiated Poly(N-vinylcaprolactam)Modified Graphite Electrode to Catechol and Ascorbic Acid
- Effects of Frequency on the Crack-Healing Behavior of Si_3N_4/SiC Composite under Cyclic Stress(Macro-, Micro-, Meso-, and Nano-scopic Strength of Materials Relating to Microstructures)
- Simulation of Multistage Electrodialysis
- Reproducibility of the Heart Rate Response to Exercise Test in Patients with Ischemic Heart Disease(Proceedings of the 2008 Annual International Health and Physical Fitness Conference)
- P-25 Is Heart Rate Response to Oxygen Uptake on Graded Exercise Test Dependent on the Exercise Method?(Proceedings of the 57th Meeting of Japan Society of Physiological Anthropology)
- Serotonin-immunoreactive Epithelial Cells in the Main Excretory Ducts of Rat Submandibular Glands
- Microheater-Driven Dancing Microbubble
- Functional Changes of Lysozyme by Conjugating with Carboxymethyl Dextran
- Application of Hydrofluoroethers as Diluent to Solvent Extraction of Zinc(II) Using Phosphorus Acid Extractants
- Effects of Ultrasonic Irradiation on Solute Permeation through a Dialysis Membrane
- Separation of V from Fe-Rich Leachant of Heavy Oil Fly Ash : Application of an Ion Exchange Moving Bed
- Role of Pressure Drop in the Counter-current Multistage Fluidized Bed of the Solid-Liquid System-Effect of Non-uniform Liquid Flow
- Control of Crystal Size Distributions in a Seeded Batch Crystallizer
- Use of HLB Values for Prediction of Drop Coalescence Behavior in Liquid-Liquid Extraction Systems Containing Industrial Extractants
- Enhancement of phase separation using a drop coalescer in an aqueous two-phase system
- EFFECT OF SCALE ON PARTICLE-IMPELLER IMPACT IN AN AGITATED VESSEL EQUIPPED WITH A RUSHTON TURBINE
- PARTICLE-IMPELLER IMPACT IN AN AGITATED VESSEL EQUIPPED WITH A RUSHTON TURBINE
- Increased Hydrophobicity of Carboxymethyl Starch Film by Conjugation with Zein(Food & Nutrition Science)
- Collisional Evolution of Galaxy Clusters and the Growth of Common Halos
- Gas-Liquid Mass Transfer Coefficient of a Pitched Bladed Paddle Up-Pumping at Extraordinary Large Gas Flow Rates
- Anisotropic Scattering Model for Estimation of Light Absorption Rates in Photoreactor with Heterogeneous Medium
- Development of an Aerobic Cultivation System by Using a Microbubble Aeration Technology
- Theoretical Tool for Optimum Design of Mixer, and Visualization and Quantification of Mixing Performance
- Increase of cytochrome c oxidase negative fibers in rimmed vacuole myopathy with inflammatory changes
- Lactic Acid Fermentation from Rice by Adopting Food Wastes as Nutrients
- Polymerized Structure and Improved Physical and Biochemical Material Properties of Carboxymethyl Dextran-Conjugated Collagen
- Soft Textural and Emulsifiable Gelatin Formed by Conjugating with Fatty-Acylated Saccharide
- Reversible Thermal Transition of Soluble Branched Chains from Slightly Acid-treated Potato Starch
- Mediastinal lymphatic drainage from pulmonary lobe based on CT observations of histoplasmosis : implications for minimal N2 disease of non-small-cell lung cancer
- Improvement of the Physical Properties of Pepsin-Solubilized Elastin-Collagen Film by Crosslinking
- Development of a Lactic Acid Recovery System Using Ammonia from a Fermentation Broth
- Liquefaction for the Lactic Acid Fermentation from Rice
- Flow in a Poppet Valve : Computation of Pressure Distribution using a Streamline Coordinate System
- DEVELOPMENT AND MIXING CHARACTERISTICS OF FOLDING ANCHOR IMPELLER FOR ROUND-BOTTOMED FLASK
- PARTICLE-IMPELLER IMPACT FOR A SIX BLADED 45°PITCHED TURBINE IN AN AGITATED VESSEL
- EFFECT OF PARTICLE-IMPELLER IMPACT RATE ON PROPERTIES OF PRODUCT CRYSTALS IN AGITATED CRYSTALLIZERS OF DIFFERENT SIZES
- Structural Characterization of the Gene for Human Histidine-Rich Glycoprotein, Reinvestigation of the 5'-Terminal Region of cDNA and a Search for the Liver Specific Promoter in the Gene
- Numerical Processing of a Visualized Streak Line Image using a Streamline Coordinate System
- Fabrication of a Microevaporator Equipped with a Piezoelectrically-Driven Diaphragm Pump
- A NEW GROWTH KINETIC MODEL FOR PHOTO-AUTOTROPHIC MICROALGAE CULTURE
- Mass Transfer Characteristics by Surface Aeration of Large Paddle Impeller : Application to a Polymerization Reactor with Liquid Level Change
- Numerical Analysis of an Axisymmetric Jet Using a Streamline Coordinate System
- EFFECT OF SIZE OF SPHERICAL PARTICLE ON COMPLETE SUSPENSION SPEED IN AGITATED VESSELS OF DIFFERENT SCALE
- A STUDY OF THE AGITATION SPEED TO JUST CAUSE COMPLETE SUSPENSION FOR NON-SPHERICAL PARTICLES
- Development of a Simulator for the Fuel Injecton Sysem of a Diesel Engine
- Biotransformation of Isoflavones by the Larvae of the Common Cutworm (Spodoptera litura)
- MIXING OF HIGHLY VISCOUS NEWTONIAN LIQUID IN A HELICAL RIBBON AGITATED VESSEL AT VARIOUS LIQUID DEPTHS
- Control of Collagen Molecular Assembly with Anionic Polysaccharides
- Distribution of Solid Particles Lighter than Liquid in an Agitated Vessel Stirred by Dual Impellers
- 酢酸セルロース-ジルコニア複合ゲル繊維へのウレアーゼの包括固定化
- LOCAL GAS HOLDUP AND GAS RECIRCULATION RATE IN AN AERATED VESSEL EQUIPPED WITH A RUSHTON TURBINE IMPELLER
- Effect of Impeller Blade Angle on Power Consumption and Flow Pattern in Horizontal Stirred Vessel
- Functional Changes of Carboxymethyl Potato Starch by Conjugating with Amino Acids
- Contribution of Charged Amino Acids to Improving the Degraded Viscosity of Potato Starch Paste by a Retort Treatment and during Storage
- Circulation time for pseudoplastic liquids in a vessel equipped with a variety of helical ribbon impellers.
- Measurement of cake thickness on membrane for microfiltration of yeast using ultrasonic polymer concave transducer.
- FEEDFORWARD CONTROL OF MULTISTAGE PROCESS
- Heterogeneous photosensitized oxygenation of 2,3-dimethyl-2-butene.
- ESTIMATION OF LIGHT ABSORPTION RATE IN A TANK TYPE PHOTOREACTOR WITH MULTIPLE LAMPS INSIDE
- Cake formation and spatial partitioning in batch microfiltration of yeast.
- A new random-walk model for assessment of light energy absorption by a photosynthetic microorganism.