Pulsed Power Technology and Its Applications at Extreme Energy-Density Research Institute (EDI), Nagaoka
スポンサーリンク
概要
- 論文の詳細を見る
Recent activities conserning pulsed power technology and its applications are reviewed. Using high-density ablation plasma produced due to the short range of an ion beam in targets, we have successfully prepared crystallized B4C thin films by ion-beam evaporation, which are characterized by hardness, wear resistance, and stability at high temperatures. Fullerenes have been prepared as well. Ultrafine nanosize powders were synthesized by pulsed wire discharge. Flue gas treatment of NOx was achieved by intense pulsed relativistic electron beam. Foil acceleration was observed to be ${\sim}8$ km/s at the ablation pressure of 13 GPa. Pulsed laser deposition was used to prepare (Cr1-x, Alx)N films. The AlN solubility limit was found to be 77 at.% AlN@. The hardness of the films increases with $x$ up to 0.75, and decreases rapidly due to their being amorphous in structure. A highly repetitive, new pulsed power generator is operational, with the specifications of 400 kV, 13 kA, 120 ns, and 1 pps.
- 2001-02-28
著者
-
Jiang Weihua
Extreme Energy-density Research Institute Nagaoka University Of Technology
-
Yang Sung-chae
Extreme Energy-density Research Institute Nagaoka University Of Technolog
-
IMADA Go
Department of Electrical Engineering, Nagaoka University of Technology
-
Suzuki Tsuneo
Extreme Energy-density Res. Inst. Nagaoka Univ. Of Technol.
-
Yatsui Kiyoshi
Extreme Energy Density Research Institute Nagaoka University Of Technology
-
Harada Nobuhiro
Department Of Biochemistry Fujita Health University
-
Kinemuchi Yoshiaki
Extreme Energy-density Research Institute Nagaoka University Of Technology
-
Suematsu Hisayuki
Extreme Energy-density Res. Inst. Nagaoka Univ. Of Technol.
-
Harada Nobuhiro
Department of Electrical Engineering, Nagaoka University of Technology, Nagaoka, Niigata 940-2188, Japan
-
Kinemuchi Yoshiaki
Extreme Energy-Density Research Institute, Nagaoka University of Technology, Nagaoka, Niigata 940-2188, Japan
-
Imada Go
Department of Electrical Engineering and Extreme Energy Density Research Institute, Nagaoka University of Technology, Nagaoka, Niigata 940-2188, Japan
-
Imada Go
Department of Electrical Engineering, Nagaoka University of Technology, Nagaoka, Niigata 940-2188, Japan
-
Suematsu Hisayuki
Extreme Energy-Density Research Institute, Nagaoka University of Technology, Nagaoka, Niigata 940-2188, Japan
-
Jiang Weihua
Extreme Energy Density Research Institute, Nagaoka University of Technology, Nagaoka, Niigata 940-2188, Japan
関連論文
- 第51回応用物理学関係連合講演会(2004年)
- 18pQE-12 大強度パルス電子ビームを用いた高出力LOGの開発IV(プラズマ科学(高強度レーザー,ジャイロトロン),領域2,原子・分子,量子エレクトロニクス,放射線物理)
- 26aQA-7 Large Orbit Gyrotronの三次元シミュレーション解析(26aQA プラズマ科学(ジャイロトロン),領域2(プラズマ基礎・プラズマ科学・核融合プラズマ・プラズマ宇宙物理))
- 26aQA-8 大強度パルス電子ビームを用いた高出力LOGの開発III(26aQA プラズマ科学(ジャイロトロン),領域2(プラズマ基礎・プラズマ科学・核融合プラズマ・プラズマ宇宙物理))
- 30pUG-3 高周波テラヘルツ光源・ジャイロトロンの開発(30pUG 高エネルギー密度状態の科学(プラズマ放射),領域2(プラズマ基礎・プラズマ科学・核融合プラズマ・プラズマ宇宙物理))
- Formation of thick cubic boron nitride films in noble gases
- Effects of He Ambient on Formation of Si Particles Using Pulsed Ion-Beam Evaporation
- Effect of Ambient Gas Temperature on Synthesis of Fe-N Nanosized Powders by Pulsed Wire Discharge
- Nanosized Ferrite Particles Synthesized by Pulsed Wire Discharge
- Formation and Expansion of Ablation Plasmas Produced by Pulsed Ion Beams for Thin Films Production
- Formation and structural characteristic of perpendicularly aligned boron nitride nanosheet bridges in polymer/boron nitride composite film and its thermal conductivity (Special issue: Nano electronic materials)
- Enhancement of Nitridation in Synthesis of Aluminum Nitride Nanosize Powders by Pulsed Wire Discharge
- Fabrication of the finestructured alumina materials with nanoimprint method
- Effect of Wire Diameter on Particle Size of Metal Nanosized Powder Prepared by Pulsed Wire Discharge
- Blue Light Emission from Ultrafine Nanosized Powder of Silicon Produced by Intense Pulsed Ion-Beam Evaporation
- Synthesis of Fe-N Nanosized Powders by Pulsed Wire Discharge
- Synthesis of Single-Walled Carbon Nanotubes by Pulsed Wire Discharge
- Extinction of Large Droplets in Ion-Beam Ablation Plasma Produced by Ion-Beam Evaporation
- Preparation of SrAl_2O_4:Eu, Dy Phosphor Thin Films on Organic Substrates by Pulsed Ion-Beam Evaporation
- Particle Size Distribution of Copper Nanosized Powders Prepared by Pulsed Wire Discharge
- Nanosized Powder Synthesis by Pulsed Wire Discharge in High-Speed Gas Flow
- Preparation of Ti-Fe Hydrogen Storage Alloy Thin Films by Pulsed Laser Deposition
- Oxidation Resistance of Cr-N-O Thin Films Prepared by Pulsed Laser Deposition
- Modification of Graphite Surface by Intense Pulsed Ion-beam Irradiation
- Synthesis of Single-Walled Carbon Nanotubes in Various Gas by Pulsed Wire Discharge
- Reduction of Oxygen Content in Ti-Fe Thin Films Prepared by Pulsed Laser Deposition
- Deposition Process of Aluminum Thin Films by Intense Pulsed Light Ion-Beam Evaporation
- High Power Microwave Generation by Virtual Cathode Oscillator
- High Power Microwave Generation By New Configuration of Virtual Cathode Oscillator
- Characterization of Pulsed High-Current Generator for Extreme Ultraviolet Generation
- Pulsed High-Current Generator for EUV Source Development
- Computer Simulations of Virtual Cathode Oscillators
- Recent Trends and Prospects of Pulsed Power Technology
- Preparation of SrAl_2O_4 : Eu Phosphor Thin Films by Intense Pulsed Ion-Beam Evaporation
- Preparation of Ti-Ni-N-O Thin Films by Pulsed Laser Deposition
- Foil Acceleration of Double-Layer Target by Intense Pulsed Ion Beam Ablation(Instrumentation, Measurement, and Fabrication Technology)
- Foil Acceleration of Double Layer Target by Intense, Pulsed, Ion-Beam Ablation
- Development of a Numerical Tool for Foil Acceleration by an Intense Pulsed Ion Beam
- Fine-structured ZnO patterns with sub-micrometer on the ceramic surface fabricated by a replication method
- Synthesis of aluminum nitride nanopowder with particle size less than 10nm by pulsed wire discharge in nitrogen gas
- Synthesis Of TiO2 nanosized powder by pulsed wire discharge (Special issue: Nano electronic materials)
- Abrupt slope change in temperature dependence of resistivity in Ni-Fe-O sintered body (特集 環境保護に必須のナノテク材料)
- Synthesis of Al2O3 nanosized powder by pulsed wire discharge using gas puff (特集 環境保護に必須のナノテク材料)
- Preparation of Ti-Fe hydrogen storage alloy thin films by pulsed laser deposition
- Oxidation Resistance of Cr-N-O Thin Films Prepared by Pulsed Laser Deposition
- Surface Modification of Graphite Targets by Intense Pulsed Ion Beam Irradiation
- Microstructural Observation of Si_Ge_x Thin Films Prepared by Pulsed Ion-Beam Evaporation
- Preparation of Polycrystalline Silicon Thin Films by Pulsed Ion-Beam Evaporation
- Preparation of Polycrystalline Silicon Thin Films by Pulsed Ion-Beam Evaporation
- Preparation of Fullerene by Pulsed Wire Discharge
- Nanosize Al_2O_3 Powder Production by Pulsed Wire Discharge
- Preparation and Characterization of C-N-H-O Thin Film by Ion Beam Evaporation
- Synthesis of Ti-Al Intermetallic Compound Films by Intense Pulsed Ion Beam Evaporation
- Preparation of B_4C Thin Film by Intense Pulsed Ion-Beam Evaporation
- Pulsed Ion-Beam Evaporation for Thin-Film Deposition
- Foil Acceleration by Intense Pulsed Ion Beam Ablation Plasma
- Pulsed Power Technology and Its Applications at Extreme Energy-Density Research Institute (EDI), Nagaoka
- Synthesis of Short Single-Walled Carbon Nanotubes by Pulsed Wire Discharge
- Critical Temperature Resistor Characteristics of Sintered Ni-Fe-O Powders
- Recent Progress in Pulse Power Technology and its Applications
- Ablation Behavior of Titanium Irradiated by High-Intensity Pulsed Ion Beams
- Influence of Organic Contaminant on Breakdown Characteristics of MOS Capacitors with Thin SiO_2
- Influence of Organic Contaminant on Breakdown Characteristics of MOS Capacitors with Thin SiO_2
- Preparation and Characterization of Cr-N-O Thin Films by Pulsed Laser Deposition
- Characteristics of (Cr_, Al_x)N Films Prepared by Pulsed Laser Deposition
- Aluminum Nitride Nanosized Powders Produced by Laser Ablation
- Effects of Supersonic Flow Channel Configuration on Pulse Discharge for Excimer Laser Excitation
- Preparation and Characterization of Cr--Zn--N--O Thin Films Deposited by Pulsed Laser Deposition
- Fourier-Transform Infrared Absorption Spectroscopy of Chromium Nitride Thin Film
- Phase Control of Ti--Fe Nanoparticles Prepared by Pulsed Wire Discharge
- Preparation and Process Clarification of Metal Nanoplate by Pulse Wire Discharged Method in Liquid Media
- Dynamics of Silicon Particles in DC Silane Plasmas Transported by a Modulated Magnetic Field ( Plasma Processing)
- High-Pressure Synthesis of CuBa2Ca3Cu4O10+\delta Superconductor from Precursors Prepared by a Polymerized Complex Method
- Fabrication of β-SiC micropatterns from a facile replication process
- Formation and Structural Characteristic of Perpendicularly Aligned Boron Nitride Nanosheet Bridges in Polymer/Boron Nitride Composite Film and Its Thermal Conductivity
- Anisotropic alignment of non-modified BN nanosheets in polysiloxane matrix under nano pulse width electricity
- Effects of Annealing on Material Characteristics of Diamond-Like Carbon Film Formed by Focused-Ion-Beam Chemical Vapor Deposition
- Synthesis of Aluminum Nitride Nanopowder with Particle Size Less than 10 nm by Pulsed Wire Discharge in Nitrogen Gas
- Treatment of Volatile Organic Compounds Contained in Soil by Pulsed Intense Relativistic Electron Beam Irradiation
- Elementary Analysis of Diamond-Like Carbon Film Formed by Focused-Ion-Beam Chemical Vapor Deposition
- Change in Magnetic Characteristics of NiFe2O4 Nanoparticles upon Organic Matter Adsorption and Desorption
- Pulsed Power Technology and Its Applications at Extreme Energy-Density Research Institute (EDI), Nagaoka
- Foil Acceleration by Intense Pulsed Ion Beam Ablation Plasma
- Thermal Durability of Diamond Like Carbon Films Containing Tungsten Fabricated by Focused-Ion-Beam Chemical Vapor Deposition
- Annealing Effect of W Incorporated Diamond-Like Carbon Fabricated by Ga Focused Ion Beam Chemical Vapor Deposition
- Synthesis of TiO2 Nanosized Powder by Pulsed Wire Discharge
- Synthesis of Single-Walled Carbon Nanotubes by Pulsed Wire Discharge
- Extinction of Large Droplets in Ion-Beam Ablation Plasma Produced by Ion-Beam Evaporation
- Determination of Submicrometer Particle Content in Copper Powder Prepared by Pulsed Wire Discharge
- Particle Size Controllability of Ambient Gas Species for Copper Nanoparticles Prepared by Pulsed Wire Discharge
- Development of a Numerical Tool for Foil Acceleration by an Intense Pulsed Ion Beam
- Particle Size Determining Equation in Metallic Nanopowder Preparation by Pulsed Wire Discharge
- Blue Light Emission from Ultrafine Nanosized Powder of Silicon Produced by Intense Pulsed Ion-Beam Evaporation
- Synthesis of Ni–Cu Nanoparticles by Pulsed Wire Discharge and their Compositional Distribution
- Synthesis of Fe-N Nanosized Powders by Pulsed Wire Discharge
- Flue Gas Treatment by Intense Pulsed Relativistic Electron Beam
- Characteristics of CrN Films Prepared by Pulsed Laser Deposition
- Preparation of SrAl2O4:Eu,Dy Phosphor Thin Films on Organic Substrates by Pulsed Ion-Beam Evaporation
- Synthesis of C
- Synthesis of Nanosize Powders of Aluminum Nitride by Pulsed Wire Discharge