Fine-structured ZnO patterns with sub-micrometer on the ceramic surface fabricated by a replication method
スポンサーリンク
概要
- 論文の詳細を見る
Fine-structured ZnO patterns with sub-micrometer based on a replication method was fabricated. A replication method was used mixtures of polyvinyl alcohol (PVA) and ZnO nanosized particles in water. The mixtures were then filled in a quartz mold with different pattern sizes and dried at room temperature. After the drying, the PVA and ZnO dried film was detached from the mold. Through burn-out at various sintering temperatures, ZnO patterns with line and space patterns as smalls as sub-micrometer in size were successfully fabricated. The results demonstrated possibilities to produce inorganic materials with various compositions and structures with a facile approach and a simple method.
- 公益社団法人 日本セラミックス協会の論文
著者
-
NIIHARA Koichi
Extreme Energy-Density Research Institute, Nagaoka University of Technology
-
SUZUKI Tsuneo
Extreme Energy-Density Research Institute, Nagaoka University of Technology
-
NAKAYAMA Tadachika
Extreme Energy-Density Research Institute, Nagaoka University of Technology
-
SUEMATSU Hisayuki
Extreme Energy-Density Research Institute, Nagaoka University of Technology
-
YOSHIMURA Takeshi
Department of Applied Materials Science, Graduate School of Engineering, Osaka Prefecture University
-
Niihara Koichi
Extreme Energy-density Res. Inst. Nagaoka Univ. Of Technol.
-
KIM Hong
Extreme Energy-Density Research Institute, Nagaoka University of Technology
-
IMAKI Kazuyoshi
Extreme Energy-Density Research Institute, Nagaoka University of Technology
-
Hong Byung
Extreme Energy-Density Research Institute, Nagaoka University of Technology
-
Suzuki Tsuneo
Extreme Energy-density Res. Inst. Nagaoka Univ. Of Technol.
-
Kim Hong
Extreme Energy-density Res. Inst. Nagaoka Univ. Of Technol.
-
Nakayama Tadachika
Extreme Energy-density Research Institute Nagaoka University Of Technology
-
Yoshimura Takeshi
Department Of Applied Materials Science Graduate School Of Engineering Osaka Prefecture University
-
Suematsu Hisayuki
Extreme Energy-density Res. Inst. Nagaoka Univ. Of Technol.
-
Imaki Kazuyoshi
Extreme Energy-density Res. Inst. Nagaoka Univ. Of Technol.
関連論文
- Preparation of functional metal nanoparticles embedded mullite composite powders by solid solution reduction
- Formation of thick cubic boron nitride films in noble gases
- Effects of He Ambient on Formation of Si Particles Using Pulsed Ion-Beam Evaporation
- Effect of Ambient Gas Temperature on Synthesis of Fe-N Nanosized Powders by Pulsed Wire Discharge
- Nanosized Ferrite Particles Synthesized by Pulsed Wire Discharge
- Formation and Expansion of Ablation Plasmas Produced by Pulsed Ion Beams for Thin Films Production
- Formation and structural characteristic of perpendicularly aligned boron nitride nanosheet bridges in polymer/boron nitride composite film and its thermal conductivity (Special issue: Nano electronic materials)
- Formation of Silicon Oxynitride Films with Low Leakage Current Using N_2/O_2 Plasma near Atmospheric Pressure
- Effects of Stoichiometry and A-site Substitution on the Electrical Properties of Ferroelectric YMnO_3
- The Relationship between the Hardness and the Point-Defect-Concentration in Neutron-Irradiated MgO・3.0Al_2O_3 Single Crystals
- Enhancement of Nitridation in Synthesis of Aluminum Nitride Nanosize Powders by Pulsed Wire Discharge
- Fabrication of the finestructured alumina materials with nanoimprint method
- Effect of Wire Diameter on Particle Size of Metal Nanosized Powder Prepared by Pulsed Wire Discharge
- Blue Light Emission from Ultrafine Nanosized Powder of Silicon Produced by Intense Pulsed Ion-Beam Evaporation
- Synthesis of Fe-N Nanosized Powders by Pulsed Wire Discharge
- Synthesis of Single-Walled Carbon Nanotubes by Pulsed Wire Discharge
- Extinction of Large Droplets in Ion-Beam Ablation Plasma Produced by Ion-Beam Evaporation
- Preparation of SrAl_2O_4:Eu, Dy Phosphor Thin Films on Organic Substrates by Pulsed Ion-Beam Evaporation
- Particle Size Distribution of Copper Nanosized Powders Prepared by Pulsed Wire Discharge
- Nanosized Powder Synthesis by Pulsed Wire Discharge in High-Speed Gas Flow
- Preparation of Ti-Fe Hydrogen Storage Alloy Thin Films by Pulsed Laser Deposition
- Oxidation Resistance of Cr-N-O Thin Films Prepared by Pulsed Laser Deposition
- Modification of Graphite Surface by Intense Pulsed Ion-beam Irradiation
- Synthesis of Single-Walled Carbon Nanotubes in Various Gas by Pulsed Wire Discharge
- Reduction of Oxygen Content in Ti-Fe Thin Films Prepared by Pulsed Laser Deposition
- Deposition Process of Aluminum Thin Films by Intense Pulsed Light Ion-Beam Evaporation
- Preparation of Ti-Ni-N-O Thin Films by Pulsed Laser Deposition
- YMnO_3 Thin Films Prepared from Solutions for Non Volatile Memory Devices
- Fine-structured ZnO patterns with sub-micrometer on the ceramic surface fabricated by a replication method
- Synthesis of aluminum nitride nanopowder with particle size less than 10nm by pulsed wire discharge in nitrogen gas
- Synthesis Of TiO2 nanosized powder by pulsed wire discharge (Special issue: Nano electronic materials)
- Abrupt slope change in temperature dependence of resistivity in Ni-Fe-O sintered body (特集 環境保護に必須のナノテク材料)
- Synthesis of Al2O3 nanosized powder by pulsed wire discharge using gas puff (特集 環境保護に必須のナノテク材料)
- Preparation of Ti-Fe hydrogen storage alloy thin films by pulsed laser deposition
- Oxidation Resistance of Cr-N-O Thin Films Prepared by Pulsed Laser Deposition
- Surface Modification of Graphite Targets by Intense Pulsed Ion Beam Irradiation
- Microstructural Observation of Si_Ge_x Thin Films Prepared by Pulsed Ion-Beam Evaporation
- Preparation of Polycrystalline Silicon Thin Films by Pulsed Ion-Beam Evaporation
- Preparation of Polycrystalline Silicon Thin Films by Pulsed Ion-Beam Evaporation
- Preparation of Fullerene by Pulsed Wire Discharge
- Nanosize Al_2O_3 Powder Production by Pulsed Wire Discharge
- Synthesis of Nanosize Powders of Aluminum Nitride by Pulsed Wire Discharge
- Preparation and Characterization of C-N-H-O Thin Film by Ion Beam Evaporation
- Synthesis of Ti-Al Intermetallic Compound Films by Intense Pulsed Ion Beam Evaporation
- Preparation of B_4C Thin Film by Intense Pulsed Ion-Beam Evaporation
- Pulsed Ion-Beam Evaporation for Thin-Film Deposition
- Pulsed Power Technology and Its Applications at Extreme Energy-Density Research Institute (EDI), Nagaoka
- Synthesis of Short Single-Walled Carbon Nanotubes by Pulsed Wire Discharge
- Critical Temperature Resistor Characteristics of Sintered Ni-Fe-O Powders
- Ablation Behavior of Titanium Irradiated by High-Intensity Pulsed Ion Beams
- New Superconducting and Magnetic Phases Emerge on the Magnetic Criticality in CeIn_3(Condensed Matter : Electronic Structure, Electrical, Magnetic and Optical Properties)
- Fabrication of YMnO_3 Thin Films on Si Substrates by a Pulsed Laser Deposition Method
- Influence of Organic Contaminant on Breakdown Characteristics of MOS Capacitors with Thin SiO_2
- Influence of Organic Contaminant on Breakdown Characteristics of MOS Capacitors with Thin SiO_2
- Novel Ferroelectric Gate Thin-Film Transistors Using a Polar Semiconductor Channel
- Single-Wall Carbon Nanotube Field Effect Transistors with Non-Volatile Memory Operation
- Synthesis of Bi(Fe_xAl_)O_3 Thin Films by Pulsed Laser Deposition and Its Structural Characterization
- Improvement of Surface Morphology and Dielectric Property of YMn0_3 Films
- Non-Fermi Liquid Behavior in the Magnetotransport of CeMIn_5 (M: Co and Rh) : Striking Similarity between Quasi Two-Dimensional Heavy Fermion and High-T_c Cuprates(Condensed matter: electronic structure and electrical, magnetic, and optical properties)
- 24aTA-5 Crystal Growth and Magnetic Properties of Ce_2Ni_3Ge_5
- Magnetic Criticality and Unconventional Superconductivity in CeCoIn_5 : Study of ^In-Nuclear Quadrupole Resonance under Pressure(Condensed Matter : Electronic Structure, Electrical, Magnetic and Optical Properties)
- Normal-state Hall Angle and Magnetoresistance in Quasi-2D Heavy Fermion CeCoIn_5 near a Quantum Critical Point(Condensed Matter : Electronic Structure, Electrical, Magnetic and Optical Properties)
- Preparation and Characterization of Cr-N-O Thin Films by Pulsed Laser Deposition
- Characteristics of (Cr_, Al_x)N Films Prepared by Pulsed Laser Deposition
- Characteristics of CrN Films Prepared by Pulsed Laser Deposition
- Enhancement of Energy Deposited in Wire in the Pulsed Wire Discharge for Nanosize Powders Synthesis
- Smooth muscle contraction by small GTPase Rho
- Facile Synthesis of Hierarchical Alumina Monoliths with Tubular Macropores and Ordered Mesoporous Walls
- Change in the water quality in Lake Ohnuma, Hokkaido, Japan: a comparison of 1977 and 1996
- Preparation and Characterization of Cr--Zn--N--O Thin Films Deposited by Pulsed Laser Deposition
- Fourier-Transform Infrared Absorption Spectroscopy of Chromium Nitride Thin Film
- Phase Control of Ti--Fe Nanoparticles Prepared by Pulsed Wire Discharge
- Mechanical properties of 2.0-3.5mol% Y_2O_3-stabilized zirconia polycrystals fabricated by the solid phase mixing and sintering method
- Mechanical properties of Y_2O_3-stabilized ZrO_2 polycrystals fabricated by the solid phase mixing and sintering method
- Preparation and Process Clarification of Metal Nanoplate by Pulse Wire Discharged Method in Liquid Media
- High-Pressure Synthesis of CuBa2Ca3Cu4O10+\delta Superconductor from Precursors Prepared by a Polymerized Complex Method
- Fabrication of β-SiC micropatterns from a facile replication process
- Formation and Structural Characteristic of Perpendicularly Aligned Boron Nitride Nanosheet Bridges in Polymer/Boron Nitride Composite Film and Its Thermal Conductivity
- Anisotropic alignment of non-modified BN nanosheets in polysiloxane matrix under nano pulse width electricity
- Effects of Annealing on Material Characteristics of Diamond-Like Carbon Film Formed by Focused-Ion-Beam Chemical Vapor Deposition
- Synthesis of Aluminum Nitride Nanopowder with Particle Size Less than 10 nm by Pulsed Wire Discharge in Nitrogen Gas
- Elementary Analysis of Diamond-Like Carbon Film Formed by Focused-Ion-Beam Chemical Vapor Deposition
- Change in Magnetic Characteristics of NiFe2O4 Nanoparticles upon Organic Matter Adsorption and Desorption
- Pulsed Power Technology and Its Applications at Extreme Energy-Density Research Institute (EDI), Nagaoka
- Investigation of Gas Sensing Characteristics of TiO2 Nanotube Field-Effect Transistor
- Thermal Durability of Diamond Like Carbon Films Containing Tungsten Fabricated by Focused-Ion-Beam Chemical Vapor Deposition
- Annealing Effect of W Incorporated Diamond-Like Carbon Fabricated by Ga Focused Ion Beam Chemical Vapor Deposition
- Synthesis of TiO2 Nanosized Powder by Pulsed Wire Discharge
- Synthesis of Single-Walled Carbon Nanotubes by Pulsed Wire Discharge
- Extinction of Large Droplets in Ion-Beam Ablation Plasma Produced by Ion-Beam Evaporation
- Determination of Submicrometer Particle Content in Copper Powder Prepared by Pulsed Wire Discharge
- Particle Size Controllability of Ambient Gas Species for Copper Nanoparticles Prepared by Pulsed Wire Discharge
- Particle Size Determining Equation in Metallic Nanopowder Preparation by Pulsed Wire Discharge
- Synthesis of Ni–Cu Nanoparticles by Pulsed Wire Discharge and their Compositional Distribution
- Synthesis of Fe-N Nanosized Powders by Pulsed Wire Discharge
- Characteristics of CrN Films Prepared by Pulsed Laser Deposition
- Preparation of SrAl2O4:Eu,Dy Phosphor Thin Films on Organic Substrates by Pulsed Ion-Beam Evaporation
- Synthesis of C
- Synthesis of Nanosize Powders of Aluminum Nitride by Pulsed Wire Discharge
- Microstructure and Crystal Phase Development of Y2O3-Stabilized ZrO2 Polycrystal Fabricated by the Solid Phase Mixing and Sintering Method