Fabrication of β-SiC micropatterns from a facile replication process
スポンサーリンク
概要
- 論文の詳細を見る
Fine-structured β-SiC ceramic patterns were successfully fabricated from a facile replication route using Si mold as the master structure, PVA as the binding agent and nanosized β-SiC powder as the raw material. After slurry deposition and drying, the patterns were integrally transferred from the Si mold to the coating samples. The intact micropatterns were maintained up to 1500°C without obvious shrinkage. The samples exhibit nearly net-sized feature of 1.7 µm after drying and sintering. This net-sized structure is a great advantage of β-SiC patterns over the counterparts of oxide ceramic materials. All samples are in nanosized porous structure with narrowly distributed pore sizes.
- 公益社団法人 日本セラミックス協会の論文
著者
-
FU Zhengyi
State Key Lab of Advanced Technology for Materials Synthesis and Processing, Wuhan University of Tec
-
NIIHARA Koichi
Extreme Energy-Density Research Institute, Nagaoka University of Technology
-
SUZUKI Tsuneo
Extreme Energy-Density Research Institute, Nagaoka University of Technology
-
NAKAYAMA Tadachika
Extreme Energy-Density Research Institute, Nagaoka University of Technology
-
SUEMATSU Hisayuki
Extreme Energy-Density Research Institute, Nagaoka University of Technology
-
Fu Zhengyi
State Key Lab Of Advanced Technology For Materials Synthesis And Processing Wuhan University Of Tech
-
Niihara Koichi
Extreme Energy-density Res. Inst. Nagaoka Univ. Of Technol.
-
Suzuki Tsuneo
Extreme Energy-density Res. Inst. Nagaoka Univ. Of Technol.
-
Nakayama Tadachika
Extreme Energy-density Research Institute Nagaoka University Of Technology
-
ZHANG Kuibao
State Key Laboratory of Advanced Technology for Materials Synthesis and Processing, Wuhan University
-
Suematsu Hisayuki
Extreme Energy-density Res. Inst. Nagaoka Univ. Of Technol.
-
OKUMURA Masatoshi
Extreme Energy-Density Research Institute, Nagaoka University of Technology
関連論文
- Preparation of functional metal nanoparticles embedded mullite composite powders by solid solution reduction
- Formation of thick cubic boron nitride films in noble gases
- Effects of He Ambient on Formation of Si Particles Using Pulsed Ion-Beam Evaporation
- Effect of Ambient Gas Temperature on Synthesis of Fe-N Nanosized Powders by Pulsed Wire Discharge
- Nanosized Ferrite Particles Synthesized by Pulsed Wire Discharge
- Formation and Expansion of Ablation Plasmas Produced by Pulsed Ion Beams for Thin Films Production
- Formation and structural characteristic of perpendicularly aligned boron nitride nanosheet bridges in polymer/boron nitride composite film and its thermal conductivity (Special issue: Nano electronic materials)
- The Relationship between the Hardness and the Point-Defect-Concentration in Neutron-Irradiated MgO・3.0Al_2O_3 Single Crystals
- Enhancement of Nitridation in Synthesis of Aluminum Nitride Nanosize Powders by Pulsed Wire Discharge
- Fabrication of the finestructured alumina materials with nanoimprint method
- Effect of Wire Diameter on Particle Size of Metal Nanosized Powder Prepared by Pulsed Wire Discharge
- Blue Light Emission from Ultrafine Nanosized Powder of Silicon Produced by Intense Pulsed Ion-Beam Evaporation
- Synthesis of Fe-N Nanosized Powders by Pulsed Wire Discharge
- Synthesis of Single-Walled Carbon Nanotubes by Pulsed Wire Discharge
- Extinction of Large Droplets in Ion-Beam Ablation Plasma Produced by Ion-Beam Evaporation
- Preparation of SrAl_2O_4:Eu, Dy Phosphor Thin Films on Organic Substrates by Pulsed Ion-Beam Evaporation
- Particle Size Distribution of Copper Nanosized Powders Prepared by Pulsed Wire Discharge
- Nanosized Powder Synthesis by Pulsed Wire Discharge in High-Speed Gas Flow
- Preparation of Ti-Fe Hydrogen Storage Alloy Thin Films by Pulsed Laser Deposition
- Oxidation Resistance of Cr-N-O Thin Films Prepared by Pulsed Laser Deposition
- Modification of Graphite Surface by Intense Pulsed Ion-beam Irradiation
- Synthesis of Single-Walled Carbon Nanotubes in Various Gas by Pulsed Wire Discharge
- Reduction of Oxygen Content in Ti-Fe Thin Films Prepared by Pulsed Laser Deposition
- Deposition Process of Aluminum Thin Films by Intense Pulsed Light Ion-Beam Evaporation
- Preparation of Ti-Ni-N-O Thin Films by Pulsed Laser Deposition
- Fine-structured ZnO patterns with sub-micrometer on the ceramic surface fabricated by a replication method
- Synthesis of aluminum nitride nanopowder with particle size less than 10nm by pulsed wire discharge in nitrogen gas
- Synthesis Of TiO2 nanosized powder by pulsed wire discharge (Special issue: Nano electronic materials)
- Abrupt slope change in temperature dependence of resistivity in Ni-Fe-O sintered body (特集 環境保護に必須のナノテク材料)
- Synthesis of Al2O3 nanosized powder by pulsed wire discharge using gas puff (特集 環境保護に必須のナノテク材料)
- Preparation of Ti-Fe hydrogen storage alloy thin films by pulsed laser deposition
- Oxidation Resistance of Cr-N-O Thin Films Prepared by Pulsed Laser Deposition
- Surface Modification of Graphite Targets by Intense Pulsed Ion Beam Irradiation
- Microstructural Observation of Si_Ge_x Thin Films Prepared by Pulsed Ion-Beam Evaporation
- Preparation of Polycrystalline Silicon Thin Films by Pulsed Ion-Beam Evaporation
- Preparation of Polycrystalline Silicon Thin Films by Pulsed Ion-Beam Evaporation
- Evolution of Paramagnetic Quasiparticle Excitations Emerged in the High-Field Superconducting Phase of CeCoIn5
- Preparation of Fullerene by Pulsed Wire Discharge
- Nanosize Al_2O_3 Powder Production by Pulsed Wire Discharge
- Synthesis of Nanosize Powders of Aluminum Nitride by Pulsed Wire Discharge
- Preparation and Characterization of C-N-H-O Thin Film by Ion Beam Evaporation
- Synthesis of Ti-Al Intermetallic Compound Films by Intense Pulsed Ion Beam Evaporation
- Preparation of B_4C Thin Film by Intense Pulsed Ion-Beam Evaporation
- Pulsed Ion-Beam Evaporation for Thin-Film Deposition
- Pulsed Power Technology and Its Applications at Extreme Energy-Density Research Institute (EDI), Nagaoka
- Synthesis of Short Single-Walled Carbon Nanotubes by Pulsed Wire Discharge
- Critical Temperature Resistor Characteristics of Sintered Ni-Fe-O Powders
- Ablation Behavior of Titanium Irradiated by High-Intensity Pulsed Ion Beams
- New Superconducting and Magnetic Phases Emerge on the Magnetic Criticality in CeIn_3(Condensed Matter : Electronic Structure, Electrical, Magnetic and Optical Properties)
- Influence of Organic Contaminant on Breakdown Characteristics of MOS Capacitors with Thin SiO_2
- Influence of Organic Contaminant on Breakdown Characteristics of MOS Capacitors with Thin SiO_2
- Non-Fermi Liquid Behavior in the Magnetotransport of CeMIn_5 (M: Co and Rh) : Striking Similarity between Quasi Two-Dimensional Heavy Fermion and High-T_c Cuprates(Condensed matter: electronic structure and electrical, magnetic, and optical properties)
- Evolution of Hall Coefficient in Two-Dimensional Heavy Fermion CeCoIn_5(Condensed Matter : Electronic Structure, Electrical, Magnetic and Optical Properties)
- 24aTA-5 Crystal Growth and Magnetic Properties of Ce_2Ni_3Ge_5
- Magnetic Criticality and Unconventional Superconductivity in CeCoIn_5 : Study of ^In-Nuclear Quadrupole Resonance under Pressure(Condensed Matter : Electronic Structure, Electrical, Magnetic and Optical Properties)
- Normal-state Hall Angle and Magnetoresistance in Quasi-2D Heavy Fermion CeCoIn_5 near a Quantum Critical Point(Condensed Matter : Electronic Structure, Electrical, Magnetic and Optical Properties)
- Normal-state Hall Angle and Magnetoresistance in Quasi-2D Heavy Fermion CeCoIn_5 near a Quantum Critical Point
- Preparation and Characterization of Cr-N-O Thin Films by Pulsed Laser Deposition
- Characteristics of (Cr_, Al_x)N Films Prepared by Pulsed Laser Deposition
- Characteristics of CrN Films Prepared by Pulsed Laser Deposition
- Enhancement of Energy Deposited in Wire in the Pulsed Wire Discharge for Nanosize Powders Synthesis
- Facile Synthesis of Hierarchical Alumina Monoliths with Tubular Macropores and Ordered Mesoporous Walls
- Preparation and Characterization of Cr--Zn--N--O Thin Films Deposited by Pulsed Laser Deposition
- Fourier-Transform Infrared Absorption Spectroscopy of Chromium Nitride Thin Film
- Phase Control of Ti--Fe Nanoparticles Prepared by Pulsed Wire Discharge
- Mechanical properties of 2.0-3.5mol% Y_2O_3-stabilized zirconia polycrystals fabricated by the solid phase mixing and sintering method
- Mechanical properties of Y_2O_3-stabilized ZrO_2 polycrystals fabricated by the solid phase mixing and sintering method
- Preparation and Process Clarification of Metal Nanoplate by Pulse Wire Discharged Method in Liquid Media
- High-Pressure Synthesis of CuBa2Ca3Cu4O10+\delta Superconductor from Precursors Prepared by a Polymerized Complex Method
- Fabrication of β-SiC micropatterns from a facile replication process
- Formation and Structural Characteristic of Perpendicularly Aligned Boron Nitride Nanosheet Bridges in Polymer/Boron Nitride Composite Film and Its Thermal Conductivity
- Anisotropic alignment of non-modified BN nanosheets in polysiloxane matrix under nano pulse width electricity
- Effects of Annealing on Material Characteristics of Diamond-Like Carbon Film Formed by Focused-Ion-Beam Chemical Vapor Deposition
- Synthesis of Aluminum Nitride Nanopowder with Particle Size Less than 10 nm by Pulsed Wire Discharge in Nitrogen Gas
- Elementary Analysis of Diamond-Like Carbon Film Formed by Focused-Ion-Beam Chemical Vapor Deposition
- Change in Magnetic Characteristics of NiFe2O4 Nanoparticles upon Organic Matter Adsorption and Desorption
- Pulsed Power Technology and Its Applications at Extreme Energy-Density Research Institute (EDI), Nagaoka
- Investigation of Gas Sensing Characteristics of TiO2 Nanotube Field-Effect Transistor
- Thermal Durability of Diamond Like Carbon Films Containing Tungsten Fabricated by Focused-Ion-Beam Chemical Vapor Deposition
- Annealing Effect of W Incorporated Diamond-Like Carbon Fabricated by Ga Focused Ion Beam Chemical Vapor Deposition
- Synthesis of TiO2 Nanosized Powder by Pulsed Wire Discharge
- Synthesis of Single-Walled Carbon Nanotubes by Pulsed Wire Discharge
- Extinction of Large Droplets in Ion-Beam Ablation Plasma Produced by Ion-Beam Evaporation
- Determination of Submicrometer Particle Content in Copper Powder Prepared by Pulsed Wire Discharge
- Particle Size Controllability of Ambient Gas Species for Copper Nanoparticles Prepared by Pulsed Wire Discharge
- Particle Size Determining Equation in Metallic Nanopowder Preparation by Pulsed Wire Discharge
- Blue Light Emission from Ultrafine Nanosized Powder of Silicon Produced by Intense Pulsed Ion-Beam Evaporation
- Synthesis of Ni–Cu Nanoparticles by Pulsed Wire Discharge and their Compositional Distribution
- Synthesis of Fe-N Nanosized Powders by Pulsed Wire Discharge
- Characteristics of CrN Films Prepared by Pulsed Laser Deposition
- Preparation of SrAl2O4:Eu,Dy Phosphor Thin Films on Organic Substrates by Pulsed Ion-Beam Evaporation
- Synthesis of C
- Synthesis of Nanosize Powders of Aluminum Nitride by Pulsed Wire Discharge
- Microstructure and Crystal Phase Development of Y2O3-Stabilized ZrO2 Polycrystal Fabricated by the Solid Phase Mixing and Sintering Method
- Enhancement of Nitridation in Synthesis of Aluminum Nitride Nanosize Powders by Pulsed Wire Discharge