Foil Acceleration by Intense Pulsed Ion Beam Ablation Plasma
スポンサーリンク
概要
- 論文の詳細を見る
Foil acceleration by ablation pressure produced by the interaction of an intense, pulsed ion-beam with thick targets has been studied, where the thickness of the target is considerably more than the range of the incident ion beam. The experiments were carried out on solid targets with ion beam energy densities ranging from 100 J/cm2 to 4.3 kJ/cm2. The maximum foil velocity obtained by time-of-flight measurement was ${\sim}7.7$ km/s, giving the estimated ablation pressure of ${\sim}13$ GPa. The experimental and simulation results were in reasonable agreement.
- 2001-02-28
著者
-
Jiang Weihua
Extreme Energy-density Research Institute Nagaoka University Of Technology
-
SHINKAI Hiroyuki
Extreme Energy Density Research Institute, Nagaoka University of Technology
-
HARADA Nob
Extreme Energy Density Research Institute, Nagaoka University of Technology
-
Yatsui Kiyoshi
Extreme Energy Density Research Institute Nagaoka University Of Technology
-
Kashine Kenji
Extreme Energy-density Research Institute Nagaoka University Of Technology
-
Kagihiro Makoto
Extreme Energy Density Research Institute Nagaoka University Of Technology
-
Yatsui Kiyoshi
Extreme Energy Density Research Institute, Nagaoka University of Technology, Nagaoka, Niigata 940-2188, Japan
-
Kagihiro Makoto
Extreme Energy Density Research Institute, Nagaoka University of Technology, Nagaoka, Niigata 940-2188, Japan
-
Kashine Kenji
Extreme Energy Density Research Institute, Nagaoka University of Technology, Nagaoka, Niigata 940-2188, Japan
-
Shinkai Hiroyuki
Extreme Energy Density Research Institute, Nagaoka University of Technology, Nagaoka, Niigata 940-2188, Japan
-
Harada Nob
Extreme Energy Density Research Institute, Nagaoka University of Technology, Nagaoka, Niigata 940-2188, Japan
-
Jiang Weihua
Extreme Energy Density Research Institute, Nagaoka University of Technology, Nagaoka, Niigata 940-2188, Japan
関連論文
- 第51回応用物理学関係連合講演会(2004年)
- 18pQE-12 大強度パルス電子ビームを用いた高出力LOGの開発IV(プラズマ科学(高強度レーザー,ジャイロトロン),領域2,原子・分子,量子エレクトロニクス,放射線物理)
- 26aQA-7 Large Orbit Gyrotronの三次元シミュレーション解析(26aQA プラズマ科学(ジャイロトロン),領域2(プラズマ基礎・プラズマ科学・核融合プラズマ・プラズマ宇宙物理))
- 26aQA-8 大強度パルス電子ビームを用いた高出力LOGの開発III(26aQA プラズマ科学(ジャイロトロン),領域2(プラズマ基礎・プラズマ科学・核融合プラズマ・プラズマ宇宙物理))
- 30pUG-3 高周波テラヘルツ光源・ジャイロトロンの開発(30pUG 高エネルギー密度状態の科学(プラズマ放射),領域2(プラズマ基礎・プラズマ科学・核融合プラズマ・プラズマ宇宙物理))
- 29pUC-7 大強度パルス電子ビームを用いた高出力LOGの開発II(29pUC プラズマ科学,領域2(プラズマ基礎・プラズマ科学・核融合プラズマ・プラズマ宇宙物理))
- 相対論的パルス電子ビームを用いた Large Orbit Gyrotron の開発
- LOG用相対論的パルス電子ビームの発生と評価
- 20aXK-6 Large Orbit Gyrotronによる電磁波発振の三次元粒子シミュレーション(プラズマ科学(ジャイロトロン/X線レーザー),領域2(プラズマ基礎・プラズマ科学・核融合プラズマ・プラズマ宇宙物理))
- 20aXK-1 大強度パルス電子ビームを用いた高出力LOGの開発(プラズマ科学(ジャイロトロン/X線レーザー),領域2(プラズマ基礎・プラズマ科学・核融合プラズマ・プラズマ宇宙物理))
- 25aXG-11 400keV電子ビームを用いた高出力LOGの開発III(プラズマ科学(ジャイロトロン),領域2(プラズマ基礎・プラズマ科学・核融合プラズマ・プラズマ宇宙物理))
- 907 高気圧パルス・グロー放電の崩壊に及ぼす衝撃波の影響(オーガナイズドセッション10 ハイエンタルピー流れ-燃焼,衝撃波,・・・-)
- Effects of He Ambient on Formation of Si Particles Using Pulsed Ion-Beam Evaporation
- 高繰り返しSOS電源を用いた大気圧放電
- 仮想陰極発振器における大電力マイクロ波発生効率の評価
- 大電流パルスパワー電源を用いたEUV光源に関する研究
- 大気圧電子ビームダイオード用パルス高電圧電源の開発
- SiC-JFETの繰り返し動作特性の評価
- 高繰り返しSOS電源の開発と大気圧放電への応用
- Effect of Ambient Gas Temperature on Synthesis of Fe-N Nanosized Powders by Pulsed Wire Discharge
- Nanosized Ferrite Particles Synthesized by Pulsed Wire Discharge
- Formation and Expansion of Ablation Plasmas Produced by Pulsed Ion Beams for Thin Films Production
- パルス細線放電法によるZnFe_2O_4超微粒子の作製
- 大旋回半径ビームジャイロトロン(LOG)の三次元数値シミュレーション
- パルスイオンビームアブレーションによる飛翔体加速効率の最適化
- 26aB11P 大強度電子ビームを用いた短パルスサブミリ波ジャイロトロンの開発(加熱・加速, 磁場・電源, 炉設計, 新概念, (社) プラズマ・核融合学会第21回年会)
- 15aQA-2 400 keV 電子ビームを用いた高出力 LOG の開発 II(プラズマ科学 : 電磁波発生・応用, 領域 2)
- プラズマフォーカスによるEUV発生実験
- The Relationship between the Hardness and the Point-Defect-Concentration in Neutron-Irradiated MgO・3.0Al_2O_3 Single Crystals
- SOSを用いた産業用パルス高電圧発生器の開発
- Enhancement of Nitridation in Synthesis of Aluminum Nitride Nanosize Powders by Pulsed Wire Discharge
- Hydrogen Storage in Amorphous Phase of Hydrogenated Carbon Nitride
- Effect of Wire Diameter on Particle Size of Metal Nanosized Powder Prepared by Pulsed Wire Discharge
- Blue Light Emission from Ultrafine Nanosized Powder of Silicon Produced by Intense Pulsed Ion-Beam Evaporation
- Synthesis of Fe-N Nanosized Powders by Pulsed Wire Discharge
- Synthesis of Single-Walled Carbon Nanotubes by Pulsed Wire Discharge
- Extinction of Large Droplets in Ion-Beam Ablation Plasma Produced by Ion-Beam Evaporation
- Preparation of SrAl_2O_4:Eu, Dy Phosphor Thin Films on Organic Substrates by Pulsed Ion-Beam Evaporation
- Particle Size Distribution of Copper Nanosized Powders Prepared by Pulsed Wire Discharge
- Nanosized Powder Synthesis by Pulsed Wire Discharge in High-Speed Gas Flow
- Preparation of Ti-Fe Hydrogen Storage Alloy Thin Films by Pulsed Laser Deposition
- Oxidation Resistance of Cr-N-O Thin Films Prepared by Pulsed Laser Deposition
- Modification of Graphite Surface by Intense Pulsed Ion-beam Irradiation
- Synthesis of Single-Walled Carbon Nanotubes in Various Gas by Pulsed Wire Discharge
- Reduction of Oxygen Content in Ti-Fe Thin Films Prepared by Pulsed Laser Deposition
- Deposition Process of Aluminum Thin Films by Intense Pulsed Light Ion-Beam Evaporation
- SIサイリスタを用いた高繰り返しパルスパワー電源の開発
- High Power Microwave Generation by Virtual Cathode Oscillator
- High Power Microwave Generation By New Configuration of Virtual Cathode Oscillator
- Characterization of Pulsed High-Current Generator for Extreme Ultraviolet Generation
- Pulsed High-Current Generator for EUV Source Development
- Computer Simulations of Virtual Cathode Oscillators
- Recent Trends and Prospects of Pulsed Power Technology
- Preparation of SrAl_2O_4 : Eu Phosphor Thin Films by Intense Pulsed Ion-Beam Evaporation
- Luminescent Properties of SrAl_2O_4 : Eu Thin Films Deposited by Intense Pulsed Ion-Beam Evaporation
- Preparation of Ti-Ni-N-O Thin Films by Pulsed Laser Deposition
- Foil Acceleration of Double-Layer Target by Intense Pulsed Ion Beam Ablation(Instrumentation, Measurement, and Fabrication Technology)
- Foil Acceleration of Double Layer Target by Intense, Pulsed, Ion-Beam Ablation
- Development of a Numerical Tool for Foil Acceleration by an Intense Pulsed Ion Beam
- Synthesis of Al2O3 nanosized powder by pulsed wire discharge using gas puff (特集 環境保護に必須のナノテク材料)
- Preparation of Ti-Fe hydrogen storage alloy thin films by pulsed laser deposition
- Oxidation Resistance of Cr-N-O Thin Films Prepared by Pulsed Laser Deposition
- Surface Modification of Graphite Targets by Intense Pulsed Ion Beam Irradiation
- Microstructural Observation of Si_Ge_x Thin Films Prepared by Pulsed Ion-Beam Evaporation
- Preparation of Polycrystalline Silicon Thin Films by Pulsed Ion-Beam Evaporation
- Preparation of Polycrystalline Silicon Thin Films by Pulsed Ion-Beam Evaporation
- 仮想陰極発振器の動特性評価と最適化
- Preparation of Fullerene by Pulsed Wire Discharge
- Nanosize Al_2O_3 Powder Production by Pulsed Wire Discharge
- Preparation and Characterization of C-N-H-O Thin Film by Ion Beam Evaporation
- Synthesis of Ti-Al Intermetallic Compound Films by Intense Pulsed Ion Beam Evaporation
- Preparation of B_4C Thin Film by Intense Pulsed Ion-Beam Evaporation
- Pulsed Ion-Beam Evaporation for Thin-Film Deposition
- Foil Acceleration by Intense Pulsed Ion Beam Ablation Plasma
- Synthesis of Short Single-Walled Carbon Nanotubes by Pulsed Wire Discharge
- Critical Temperature Resistor Characteristics of Sintered Ni-Fe-O Powders
- Recent Progress in Pulse Power Technology and its Applications
- Preparation and Evaluation of Aligned Naphthacene Thin Films Using Surface Plasmon Excitation(Evaluation of Organic Materials,Towards the Realization of Organic Molecular Electronics)
- Preparation and Evaluation of Aligned Naphthacene Thin Films Using Surface Plasmon Excitation(Fabrication of organic materials)
- Preparation and Evaluation of Aligned Naphthacene Thin Films Using Surface Plasmon Excitation
- Ablation Behavior of Titanium Irradiated by High-Intensity Pulsed Ion Beams
- NO_x Treatment Using Inductive-Energy-Storage Pulsed Power Generator
- NO_x Removal Using Inductive-Energy-Storage Pulsed Power Generator
- Characteristics of (Cr_, Al_x)N Films Prepared by Pulsed Laser Deposition
- Aluminum Nitride Nanosized Powders Produced by Laser Ablation
- Formation and Structural Characteristic of Perpendicularly Aligned Boron Nitride Nanosheet Bridges in Polymer/Boron Nitride Composite Film and Its Thermal Conductivity
- Pulsed Power Technology and Its Applications at Extreme Energy-Density Research Institute (EDI), Nagaoka
- Foil Acceleration by Intense Pulsed Ion Beam Ablation Plasma
- Synthesis of TiO2 Nanosized Powder by Pulsed Wire Discharge
- Synthesis of Single-Walled Carbon Nanotubes by Pulsed Wire Discharge
- Extinction of Large Droplets in Ion-Beam Ablation Plasma Produced by Ion-Beam Evaporation
- Determination of Submicrometer Particle Content in Copper Powder Prepared by Pulsed Wire Discharge
- Particle Size Controllability of Ambient Gas Species for Copper Nanoparticles Prepared by Pulsed Wire Discharge
- Development of a Numerical Tool for Foil Acceleration by an Intense Pulsed Ion Beam
- Blue Light Emission from Ultrafine Nanosized Powder of Silicon Produced by Intense Pulsed Ion-Beam Evaporation
- Synthesis of Ni–Cu Nanoparticles by Pulsed Wire Discharge and their Compositional Distribution
- Synthesis of Fe-N Nanosized Powders by Pulsed Wire Discharge
- Flue Gas Treatment by Intense Pulsed Relativistic Electron Beam
- Characteristics of CrN Films Prepared by Pulsed Laser Deposition
- Preparation of SrAl2O4:Eu,Dy Phosphor Thin Films on Organic Substrates by Pulsed Ion-Beam Evaporation