Fabrication of High Performance Polymeric Microfluidic Device by a Simple Imprinting Method using a Photosensitive Sheet
スポンサーリンク
概要
- 論文の詳細を見る
We describe a low cost and high performance fabrication process to make a polymeric microfluidic device. The original microfluidic device pattern was made of a flat photosensitive sheet in which a mold base device was fabricated using the combined techniques of both electroforming and photolithography. As an example of our novel process, an electrophoresis chip was prepared using poly(methyl methacrylate) (PMMA) for a DNA analysis. The result shows that the fabricated chip has an equivalent DNA separation performance when compared to a similar ready-made product.
- 2006-01-25
著者
-
Niwa Osamu
National Institute Of Advanced Industorial Science And Technology (aist)
-
OHYA Seishiro
Kanagawa Industrial Technology Research Institute
-
ITO Takeshi
Kanagawa Industrial Technology Research Institute
-
MARUYAMA Kenichi
Faculty of Science and Engineering, Keio University
-
HONDA Aki
Japan Science and Technology Agency, CREST
-
Miyoshi Hiroko
Hitachi Chemical Co. Ltd.
-
Kaneko Satoru
Kanagawa Industrial Technol. Center Kanagawa Jpn
-
Kawaguchi Taku
Hitachi Chemical Co. Ltd.
-
Terasaka Kouichi
Faculty Of Science And Engineering Keio University
-
Suzuki Koji
Faculty Of Environmental Earth Science Hokkaido University
-
Kaneko Satoru
Kanagawa Industrial Technology Research Institute (KITRI), 705-1 Shimo-imaizumi, Ebina, Kanagawa 243-0345, Japan
-
Honda Aki
Japan Science and Technology Agency, CREST, Kawaguchi Center Building, 4-1-8 Honcho, Kawaguchi, Saitama 332-0012, Japan
-
Miyoshi Hiroko
Hitachi Chemical Co., Ltd., 4-13-1 Higashimachi, Hitachi, Ibaraki 317-8555, Japan
-
Terasaka Kouichi
Faculty of Science and Engineering, Keio University, 3-14-1 Hiyoshi, Kohoku-ku, Yokohama 223-0061, Japan
-
Ohya Seishiro
Kanagawa Industrial Technology Research Institute (KITRI), 705-1 Shimo-imaizumi, Ebina, Kanagawa 243-0345, Japan
-
Maruyama Kenichi
Faculty of Science and Engineering, Keio University, 3-14-1 Hiyoshi, Kohoku-ku, Yokohama 223-0061, Japan
-
ITO Takeshi
Kanagawa Industrial Technology Center
-
Ito Takeshi
Kanagawa Industrial Technology Research Institute (KITRI), 705-1 Shimo-imaizumi, Ebina, Kanagawa 243-0345, Japan
-
Kawaguchi Taku
Hitachi Chemical Co., Ltd., 4-13-1 Higashimachi, Hitachi, Ibaraki 317-8555, Japan
-
Niwa Osamu
National Institute of Advanced Science and Technology (AIST), 1-1-1 Higashi, Tsukuba, Ibaraki 305-8566, Japan
-
Ohya Seishiro
Kanagawa Industrial Technology Center, Kanagawa Prefectural Government, 705-1 Shimo-Imaizumi, Ebina, Kanagawa 243-0435, Japan
-
Suzuki Koji
Faculty of Science and Engineering, Keio University, 3-14-1 Hiyoshi, Kohoku-ku, Yokohama 223-0061, Japan
関連論文
- Temporal changes in community composition of heterotrophic bacteria during in situ iron enrichment in the western subarctic Pacific (SEEDS-II)
- Primary productivity, bacterial productivity and nitrogen uptake in response to iron enrichment during the SEEDS II
- Suppression of Non-specific Adsorption Using Densified Tri(ethylene glycol) Alkanethiols : Monolayer Characteristics Evaluated by Electrochemical Measurements
- Evidence for the Grazing Hypothesis : Grazing Reduces Phytoplankton Responses of the HNLC Ecosystem to Iron Enrichment in the Western Subarctic Pacific (SEEDS II)
- Structural Modulation in Oxygen Deficient Epitaxial Bi_2Sr_2Ca_1Cu_2O_X Observed by X-ray Reciprocal Space Mapping
- Epitaxial Yttria-stabilized Zirconia (YSZ) Film Deposited on Si(100) Substrate by YAG Laser
- Effect of Buffer Layer on Epitaxial Growth of YSZ Deposited on Si Substrate by Slower Q-switched 266nm YAG Laser
- Bi_2Sr_2Ca_1Cu_2O_X Thin Film Deposition by Q-switched YAG Laser
- Iron supply to the western subarctic Pacific : Importance of iron export from the Sea of Okhotsk
- Twin-Free Epitaxial Films Lateral Relation between YSZ(111) and Si(111)
- Fabrication of High Performance Polymeric Microfluidic Device by a Simple Imprinting Method using a Photosensitive Sheet
- Metalorganic Chemical Vapor Deposition of Epitaxial Perovskite SrIrO_3 Films on (100)SrTiO_3 Substrates
- Epitaxial Growth of β-FeSi_2 on Single Crystal Insulator
- Application of Microchip Fabricated of Photosensitive Glass for Thermal Lens Microscopy : Instrumentation, Measurement, and Fabrication Technology
- Effect of Strain in Epitaxially Grown SrRuO_3 Thin Films on Crystal Structure and Electric Properties
- Detection of UVBR-sensitive and -tolerant bacteria in surface waters of the western North Pacific
- Amplified Electrochemical Detection Based on Redox Cycle at a Liquid/Liquid Interface Formed in a Microchannel
- Response of lower trophic organisms to nutrient input and effects on carbon budget : a mesocosm experiment
- Tempo-spatial patterns of bacterial community composition in the western North Pacific Ocean
- Highly Sensitive and High-Throughput Analysis of Plant Hormones Using MS-Probe Modification and Liquid Chromatography-Tandem Mass Spectrometry : An Application for Hormone Profiling in Oryza sativa
- Differences in cell viabilities of phytoplankton between spring and late summer in the northwest Pacific Ocean
- Growth of β-FeSi_2 Thin Film on Si (111) by Metal-Organic Chemical Vapor Deposition : Surfaces, Interfaces, and Films
- Mass Density as Basis Parameter on Mechanical Properties under Diamond-Like Carbon Prepared in Wide Range of Conditions Using Variety of Methods
- 単結晶シリコンマイクロブリッジ光源
- Surface Accumulable Coreactant for Bright Electrogenerated Chemiluminescence at Trace Level Concentrations
- 高放射小型赤外線光源用薄膜の開発
- Fabrication of Ni/Al2O3/Ni Heteroepitaxial Junction by Post-Hydrogen Reduction of NiO/Al2O3/NiO Trilayered Epitaxial Thin Film
- Fabrication of Ferromagnetic Ni(111) Nanoparticles Embedded Epitaxially in (Mg,Ni)O Matrix by Reduction of (Mg0.5Ni0.5)O(111) Epitaxial Thin Film
- Micro Press Molding of Borosilicate Glass Using Plated Ni–W Molds
- Twin-Free Epitaxial Films Lateral Relation between YSZ(111) and Si(111)
- Supercell Structure on Continuous Growth of Bi2Sr2Ca1Cu2Ox Film
- Effect of Strain on Supercell Structure of Bismuth Cuprate Superconducting Film
- Large Lattice Misfit on Epitaxial Thin Film: Coincidence Site Lattice Expanded on Polar Coordinate System
- Evolution of Atomically Stepped Surface of Indium Tin Oxide Thin Films Grown on Nanoimprinted Glass Substrates
- Epitaxial Orientation of $\beta$-FeSi2 on 3C-SiC/Si(111)
- Synthesis of Mica Thin Film by Pulsed Laser Deposition
- Bifunctional Tri(ethylene glycol) Alkanethiol Monolayer Modified Gold Electrode for On-Chip Electrochemical Immunoassay of pg Level Leptin
- 2P276 Specific interactions between the carbohydrate on gold nanoparticles and lectins(40. Membrane structure,Poster Session,Abstract,Meeting Program of EABS & BSJ 2006)
- 2P273 Efficient molecular recognition by lectin to the glyco-functionalized self-assembled monolayers(40. Membrane structure,Poster Session,Abstract,Meeting Program of EABS & BSJ 2006)
- Assessing Aptitude of Plated Ni–W Film as Mold Materials for Borosilicate Glass
- Do musculoskeletal degenerative diseases affect mortality and cause of death after 10 years in Japan?
- Iron Deficiency in Micro-Sized Diatoms in the Oyashio Region of the Western Subarctic Pacific during Spring
- 1P336 Specific interaction of the fluorescent probe derived from acylated 3β-cholesteryl amine with sphingolipid(12. Membrane dynamics,Poster Session,Abstract,Meeting Program of EABS & BSJ 2006)
- Electroanalytical Chemistry with Carbon Film Electrodes and Micro and Nano-Structured Carbon Film-Based Electrodes
- Electrochemical Determination of Oxidative Damaged DNA with High Sensitivity and Stability Using a Nanocarbon Film
- Room-Temperature Epitaxial Growth of (Li,Ni)O Thin Film with Li Content up to 60 mol %
- Fabrication of High Performance Polymeric Microfluidic Device by a Simple Imprinting Method using a Photosensitive Sheet
- The stiffness parameter β assessed by an ultrasonic phase-locked echo-tracking system is associated with plaque formation in the common carotid artery
- Reduction of liver stiffness by antiviral therapy in chronic hepatitis B
- An sp^2 and sp^3 Hybrid Nanocrystalline Carbon Film Electrode for Anodic Stripping Voltammetry and Its Application for Electrochemical Immunoassay
- Application of PTR-MS to an incubation experiment of the marine diatom Thalassiosira pseudonana
- Electron Cyclotron Resonance-Sputtered Nanocarbon Film Electrode Compared with Diamond-Like Carbon and Glassy Carbon Electrodes as Regards Electrochemical Properties and Biomolecule Adsorption
- Growth of Nanocubic MgO on Silicon Substrate by Pulsed Laser Deposition
- 金ナノ粒子を用いた三次元櫛形電極の作製とバイオセンシングヘの応用
- Epitaxial Indium Tin Oxide Film Deposited on Sapphire Substrate by Solid-Source Electron Cyclotron Resonance Plasma
- Fabrication of Glassy Carbon Molds Using Hydrogen Silsequioxane Patterned by Electron Beam Lithography as O2 Dry Etching Mask
- Effect of Buffer Layer on Epitaxial Growth of YSZ Deposited on Si Substrate by Slower Q-switched 266 nm YAG Laser
- Epitaxial Growth of Ferromagnetic Iron Silicide Thin Films on Silicon with Yttria-Stabilized Zirconia Buffer Layer
- Epitaxial Pt Films with Different Orientations Grown on (100)Si Substrates by RF Magnetron Sputtering
- Photoluminescence Properties from $\beta$-FeSi2 Film Epitaxially Grown on Si, YSZ and Si//YSZ
- 表面プラズモン共鳴免疫測定における高特異的吸着能と非特異的吸着抑制能を有するポリイオン混合薄膜修飾
- Epitaxial Growth of (100)-Oriented $\beta$-FeSi2 Thin Films on Insulating Substrates
- Highly Selective Response of Dopamine Against its Metabolite and Interfering Molecules at Sputtered ITO Electrode Surface
- Preparation of Diamond-Like Carbon on Ti Film with Tetramethylsilane Buffer Layer
- Property Variation of Ni--W Electroformed Mold for Micro-Press Molding