Highly Reliable 0.15 μm/14 F2 Cell Ferroelectric Random Access Memory Capacitor Using SrRuO3 Buffer Layer

概要

論文の詳細を見る
We investigated a novel technique of modifying the interface between a Pb(ZrxTi1-x)O3 (PZT) thin film and electrodes for high density 64 Mbit ferroelectric random access memory (FRAM) device. Using a SrRuO3 buffer layer, we successfully developed highly reliable 0.15 μm/14 F2 cell FRAM capacitors with 75-nm-thick polycrystalline PZT thin films. The SrRuO3 buffer layer greatly enhanced ferroelectric characteristics due to the decrease in interfacial defect density. In PZT capacitors with a total thickness of 180 nm for whole capacitor stack, a remnant polarization of approximately 42 μC/cm2 was measured with a 1.4 V operation. In addition, an opposite state remnant polarization loss of less than 15% was observed after baking at 150 °C for 100 h. In particular, we found that the SrRuO3 buffer layer also played a key role in inhibiting the diffusion of Pb and O from the PZT thin films.
Published by the Japan Society of Applied Physics through the Institute of Pure and Applied Physicsの論文
2006-04-30