Mechanism of Ultrasonic Irradiation on Joining of Alumina/Copper(Materials, Metallurgy & Weldability)
スポンサーリンク
概要
- 論文の詳細を見る
Ultrasonic waves were applied during the brazing of alumina to copper using Zn-Al alloys as filler metal. The intensity of the ultrasonic wave was 1kW and 18kHz, the aim of this work being to study the mechanism of ultrasonic waves during the brazing of alumina and copper. The joining mechanism was investigated by measuring the joining strength and analyzing the microstructure at the interface of the joint. The effect of ultrasound was derived primarily from acoustic cavitations, impact and friction between filler and alumina ceramic. This was to improve the wetting between alumina and the filler, it meant that the percentage of wetted area on the alumina surface increased by increasing the application time of ultrasonic waves and this was reflected in improved joint strength. Another advantage of the ultrasonic method is that it can reduce the joining temperature and so reduce the thermal stress in the braze joint.
- 大阪大学の論文
著者
関連論文
- Wetting of Silicon Carbide by Copper-Titanium Alloys(Physics, Process, Instrument & Measurement)
- High Rate Sputtering of Corrosion-Resistant Alloys(Welding Physics, Processes & Instruments)
- Solid State Diffusion Bonding of Silicon Nitride with Vanadium Foils(Materials, Metallurgy & Weldability)
- Interfacial Microstructure of Solid State Diffusion Bonded Silicon Nitride using Niobium Foils(Materials, Metallurgy & Weldability, INTERNATIONAL SYMPOSIUM OF JWRI 30TH ANNIVERSARY)
- Ultrasonic Brazing of Alumina to Copper Using Zn-Al Filler(Materials, Metallurgy & Weldability)
- Influence of Brazing Condition on Shear Strength of Alumina-Kovar Joint Made with Amorphous Cu_Ti_ Filler Metal
- Corrosion Behavior of Amorphous Fe-Cr-Zr Alloys
- Effect of Chromium Addition on Corrosion Resistance of Amorphous Co-Zr Alloys
- Reaction and Structure at the Solid State Diffusion Bonded Ti/Si_3N_4 Interface(Materials, Metallurgy & Weldability)
- Laser Metallization of Ceramics
- Heat-Resistant Brazing of Ceramics (Report I) : Brazing of SiC Using Ni-Ti Filler Metals(Physics, Process, Instrument & Measurement)
- Amorphous Alloy and Its Application to Joining
- Joining of Alumina to Copper Using Amorphous Cu-Ti Filler Metal(Materials, Metallurgy & Weldability)
- Joining of Al_2O_3 to SUS 304 with Ti Foil
- Wetting of Zirconia by Cu-Zr Alloys
- Interfacial Structure and Bond Strength of Solid State Bonded SiC/Ni Joints(Materials, Metallurgy & Weldability)
- Effect of Sn Addition to Cu-Ti Filler Metals on Microstructure and Strength of SiC/SiC Joint(Materials, Metallurgy & Weldability)
- Interfacial Microstructure and Reaction Phases in Si_3N_4/Si_3N_4 Joints Brazed with Cu-Zn-Ti Filler Alloy(Materials, Metallurgy & Weldability, INTERNATIONAL SYMPOSIUM OF JWRI 30TH ANNIVERSARY)
- 408 REACTION SYNTHESIS OF NiAl-TiC COMPOSITES AND IN-SITU JOINING TO Ni_3Al ALLOYS
- High Temperature Reactions of Ti with SiC(Materials, Metallurgy & Weldability)
- Interfacial Structure and Reaction Mechanism of SiC/Nb Joints(Materials, Metallurgy & Weldability)
- Brazing of Si_3N_4 to Metals with Al-Cu Filler Metals(Physics, Process, Instrument & Measurement)
- Brazing of Si_3N_4 to Metals with Al Filler (Report II) : Si_3N_4/Fe, Ni, Cu, Al or SUS304 Joint(Physics, Process, Instrument & Measurement)
- Brazing of Si_3N_4 to Metals with Al Filler (Report I) : Si_3N_4/Si_3N_4 and Si_3N_4/Ti or Nb Joints(Materials, Metallurgy & Weldability)
- Intermediary Layer of Titanium Oxide in Al_2O_3/Cu Joint Using Amorphous Cu-Ti Filler Metals
- Formation of Hercynite (FeAl_2O_4) at Interface of Al_2O_3/Steel Joint
- Thermal Stability of Microstrucuture and Microhardness in Nanostructured Ni-Cr Alloy Foils Prepared by RF Sputtering Method(Materials, Metallurgy & Weldability)
- Interfacial Reaction between Titanium and Silicon Nitride during Solid State Diffusion Bonding(Materials, Metallurgy & Weldability)
- Interface Layer Structure of Solid State Bonded SiC/TiAl Joint(Materials, Metallurgy & Weldability)
- Mechanical Properties of Nanostructured Cr-B Films Produced by RF Sputtering(Materials, Metallurgy & Weldability)
- Synthesis of β-FeSi_2 Utilizing the Combined Process of MA/SPS(Materials, Metallurgy & Weldability)
- Joining of Silicon Nitride Using Amorphous Cu-Ti Filler Metal(Materials, Metallurgy & Weldability)
- Joining of SiC Using Amorphous Ti Base Filler Metal(Materials, Metallurgy & Weldability)
- Joining of Silicon Nitride to Metals or Alloys Using Amorphous Cu-Ti Filler Metal(Materials, Metallurgy & Weldability)
- Non-oxide Ceramics (Si_3N_4, SiC) Joint Made with Amorphous Cu_Ti_ and Ni_Ti_ Filler Metals
- Development of Cu-Sn or Cu-Zn Filler Metal for Joining Ceramics(Materials, Metallurgy & Weldability)
- Interface Structure and Strength of Si_3N_4/Si_3N_4 Joints Brazed with Ni-Si-Ti Filler Metals(Materials, Metallurgy & Weldability, INTERNATIONAL SYMPOSIUM OF JWRI 30TH ANNIVERSARY)
- Bonding Behavior between Niobium and Reaction-Sintered SiC(Materials, Metallurgy & Weldability)
- Controlling of Ceramic-Metal Interfacial Structure Using Molten Metals
- Ultrasonic Brazing of Alumina to Copper Using Zn-Al-Cu Fillers(Materials, Metallugy & Weldability)
- Coating of High Corrosion Resistant Amorphous Stainless Steels by RF Sputtering(Materials, Metallurgy & Weldability)
- Ultrasonic Soldering of Alumina to Copper Using Sn-Pb Solders(Materials, Metallurgy & Weldability)
- Joining Ability of Al-Base Filler Metals against Al_2O_3(Materials, Metallurgy & Weldability)
- Application of Ultrasonic Waves during Brazing of Alumina/Copper Using Zn-Sn Filler(Materials, Metallurgy & Weldability, INTERNATIONAL SYMPOSIUM OF JWRI 30TH ANNIVERSARY)
- Formation of Corrosion Resistant Amorphous Ti-B Alloys(Materials, Metallurgy & Weldability)
- Electron Back-Scatter Pattern Analyses of a Recrystallized Al-4mass%Mg Alloy Sheet(Materials, Metallurgy & Weldability)
- Fabrication and Applications of Rapidly Quenched Metals
- Impact Welding of Aluminum onto Copper by the Gas-Gun Method(Materials, Metallurgy & Weldability)
- Joining of Advanced Materials by Combustion Synthesis
- Wetting of Alumina by Molten Aluminum and Aluminum-Copper Alloys(Welding Physics, Process & Instrument)
- Joining Al_2O_3 to Al_2O_3 by Brazing
- Wetting of Silicon Nitride by Copper-Titanium or Copper-Zirconium Alloys(Welding Physics, Process & Instrument)
- Interfacial Phenomena and Bond Strength in Joining AlN Ceramics Using Metals Foils(Materials, Metallurgy & Weldability)
- Brazeability of Ni-Sn-Ti Filler Metals against Si_3N_4(Materials, Metallurgy & Weldability)
- Mechanism of Ultrasonic Irradiation on Joining of Alumina/Copper(Materials, Metallurgy & Weldability)
- Statistical Analysis of Alumina/Metal Brazed Joints under Applying of Ultrasonic Waves(Materials, Metallurgy & Weldability)
- Kinetics of Growth of Reaction Phases at Ceramic/Metal Interfaces
- The Crystallization Kinetics of Glassy Fe_ Ni_ P_