High-Pressure Synthesis of a Bi-Pb-Sr-Ca-Cu-O Superconductor
スポンサーリンク
概要
- 論文の詳細を見る
Nearly perfect high-T_c single-phase powder of Bi-Pb-Sr-Ca-Cu-O was prepared by a modified solid-phase reaction method. This powder was then synthesized under 5.4 GPa to form a high-density block. While the pressed sample exhibited semiconducting behaviour, the post annealed sample showed a superconducting transition with T_<c,onset>=113 K, T_<c,end>=105 K and J_c (at 77 K)=508 A/cm^2.
- 社団法人応用物理学会の論文
- 1989-03-20
著者
-
井村 徹
愛知工業大学 工学部 機械学科
-
IMURA Toru
Department of Mechanical Engineering, Aichi Institute of Technology
-
KAWAHARA Nobuaki
Nippondenso Research Laboratories
-
HOSHIZAKI Hiroki
Nippondenso Research Laboratories
-
Matsumuro Akihito
Department Of Mechanical Engineering Aichi Institute Of Technology
-
SHINOHARA Toshiyuki
Nippondenso Research Laboratories
-
ENAMI Hiroyoshi
Nippondenso Research Laboratories
-
KAWAHARA Nobuaki
Department of Research and Development, Nippondenso Co. Ltd.
-
ENAMI Hiroyoshi
Department of Research and Development, Nippondenso Co. Ltd.
-
SHINOHARA Toshiyuki
Department of Research and Development, Nippondenso Co. Ltd.
-
KAWABATA Sanemasa
Department of Research and Development, Nippondenso Co. Ltd.
-
HOSHIZAKI Hiroki
Department of Research and Development, Nippondenso Co. Ltd.
-
Kawabata S
Tokyo Inst. Polytechnics Kanagawa Jpn
-
Enami H
Nippondenso Research Laboratories
-
Shinohara T
Tokyo Univ. Agriculture And Technology Tokyo
-
Imura Toru
Department Of Mechanical Engineering Aichi Institute Of Technology
関連論文
- 超高速プラズマ照射とレーザー超急冷による表面改質(一般研究)
- Zr基金属ガラスの超塑性変形と微構造
- 406 Pt基金属ガラスの高速超塑性(材料力学-機能材料)
- 過冷却液体領域を持つZr基金属ガラスの変形組織
- レールガン溶射における被膜形成機構
- HI NICALONを強化材とした一方向繊維強化Si_3N_4複合材の機械的特性
- Al/Ge二層膜におけるフラクタル状パターン形成の in-situ SEM 観察
- Al/アモルファスGe二層膜の結晶化に伴うフラクタル状パターン形成
- 低温水素イオン注入により導入されたシリコン結晶欠陥の特性分析
- プロトン剥離現象における不純物依存性
- プロトン注入シリコンの加熱その場観察(プロジェクト研究)
- Hイオン注入されたシリコンの欠陥分布観察(プロジェクト研究)
- 435 H^+注入されたSiの加熱剥離挙動(O.S.9. 機能薄膜創成と物性)
- 水素イオン注入により発生したシリコン結晶内プレートレットのTEM観察
- 水素イオン注入欠陥のその場加熱観察
- 水素イオン注入欠陥層のプレートレット分布評価
- Deformation Behavior of Pt-based Metallic Glass at Elevated Temperatures
- Crystallization of Zr_Al_Ni_5Cu_ Bulk Metallic Glass Composites Containing ZrC Particles
- Microstructure of Superplastic Zr_Al_Ni_Cu_ Metallic Glass
- Elevated-Temperature Al-Ti-Fe-Cr Alloys with High Ductility at High-Strain-Rates
- Quick Re-Ordering of Long-Range Order across the APB Wall Moving with a Superlattice Dislocation and the Anomalous Yield-Stress Peak in β-Brass
- 715 Y_2O_3 添加部分安定化 ZrO_2 における正方晶-単斜晶変態の本性(セラミックス, 萌芽・境界技術, 日本鉄鋼協会第 113 回(春季)講演大会)
- ショットピーニングによって生成したナノ結晶相の疲労強度に及ぼす影響
- ショットピーニングによって発生する表面層の実体
- 溶湯攪拌法で作製したAlM/ZK51マグネシウム合金複合材料の高速超塑性
- AIN粒子強化マグネシウム合金複合材料の超塑性
- アモルファス合金粉末の固化成形
- パルス大電流を利用する超高速プラズマ溶射の研究(4) -Ti-Al金属間化合物被膜の形成-
- カーボンナノチューブ探針を用いた高アスペクト比ナノスケール穴加工法の開発
- Pt貴金属ガラスの変形挙動のその場観察
- SiC粒子分散Al-Ti-Fe-Cr急速凝固粉末冶金複合材
- 528 Pt 基金属ガラスの高速超塑性変形挙動
- ZrC粒子を含むZr55AlloNisCu30バルク金属ガラス複合材料のナノ結晶化挙動(プロジェクト研究)
- 415 Zr基金属ガラス及びその複合材料のトライボロジー特性(機能材料)
- 高強度を有する急速凝固P/Mアルミニウム合金の耐摩耗性
- 急速凝固P/M Al-Ti-Fe-TM合金の耐摩耗性と耐熱性
- 高強度P/Mアルミニウム合金の摩耗特性
- 3p-N-8 バルクの非晶質合金の音速
- SPMによる引掻き試験でシリコン単結晶に生じた微構造変化のTEM観察
- シリコン単結晶のマイクロ磨耗
- シリコン単結晶のマイクロ摩耗特性と摩耗組織
- Effect of Heat Treatment on Impact Toughness of Aluminum Silicon Eutectic Alloy Processed by Rotary-Die Equal-Channel Angular Pressing
- Observation of High Dose H^+ Implanted Damaged Layer
- Fabrication of Josephson Junctions by Focused Electron Beam Irradiation
- Fabrication of DC Supereonducting Quantum Interference Devices with Hybrid Structure of Polycrystalline Y_1Ba_2Cu_3O_x Films and Epitaxial Y_1Ba_2Cu_3O_x Films
- Microstructure of Fe-B-Si Alloy Surface Layers Produced by Laser-Quenching
- Direct Intensification of Electorn Microscopic Images with Silicon Diode Array Target
- Electric Resistivity and Cyclic Deformation of Liquid-Quenched Fe-Based and Co-Based Amorphous Alloys
- High Temperature Hardness of Titanium Diboride Single Crystal
- 原始的構造解析システムの現状と課題
- A Push-Pull Straining Device for HVEM In-Situ Deformation Experiment
- Dislocation Motions in Strongly Electron-Irradiated Aluminum
- Direct Observation of Dislocation Motions in Iron at Low Temperatures by HVEM
- A New Tensile Testing Device Usable from Room Temperature to -150℃ in an Electron Microscope
- A New Tensile Testing Device Usable at -150℃ for Electron Microscopic Observation
- 743 金属微粒子の融点(急冷薄帯, 噴霧粉, 粉体製造, 粉末冶金, 萌芽・境界技術, 日本鉄鋼協会第 114 回(秋季)講演大会)
- Dislocation Mobility and Yield Stress in Silver and Silver-Tin Dilute Alloy Single Crystals
- Straining Apparatus for Dynamic Observation by X-Ray Topography
- Usage of the Fiber Plate Image Orthicon for Quick Video Recording of Electron Microscopic Images
- Direct Observation of Luders Band Propagation in Silicon Iron Single Crystal by HVEM
- Direct Observation of Multiplication of Dislocations in Iron Single Crystal by High Voltage Electron Microscopy (HVEM)
- Growth of IVa-Diborides Single Crystals in Molten Iron
- Yield Stress in Silver and Silver-Tin Dilute Alloy Single Crystals
- Dislocation Generation in the Initiation of Fractures in Silicon Crystals
- Stress Measurable Tensile Device for Electron Microscopic Observation
- Direct Observation of Propagation of Crack by High Voltage Electron Microscopy (HVEM)
- On the Preparation of Tensile Test Pieces for Transmission Electron Microscopic Observation
- Direct Measurement of Mobility of Edge and Screw Dislocations in 3% Silicon-Iron by High Voltage Transmission Electron Microscopy
- A Direct Method to Investigate the Dynamical Properties of Dislocations Based on High Voltage Electron Microscopy
- Direct Measurements of the Mobilities of Edge and Screw Dislocations in Fe-3%Si Alloy by High Voltage Electron Transmission Microscopy
- Hardness Anisotropy of Single Crystals of IVa-Diborides
- Destruction and Recovery of Superconductivity in Bi-Pb-Sr-Ca-Cu-O Synthesized under High Pressure
- Direct Observation of Crystallization Process from Amorphous Y-Ba-Cu-O Film by means of Optical Microscopy
- 透過型電子顕微鏡法によるα-Si_3N_4ウイスカーの微細構造の解析(セラミックスの微細構造)
- Direct Observations of Dislocation Motion in an Al-Mg Solid-Solution Alloy in Three Different Temperature Ranges by HVEM
- Stress-Strain Measurable High-Temperature Tensile Test Device for Use with Electron Microscope
- On the Microwelding of Tensile Test Pieces for Transmission Electron Microscopic Observation
- High Pressure Hot-Pressing of Y_1Ba_2Cu_3O_ Superconductor
- Preparation and Characterization of Grain Boundary Josephson Junction from Amorphous Thin Film
- Ternary Phase Diagram of the YO_-BaO-CuO System and the In Situ Observation of Crystal Growth
- Direct Observations of Melting and Solidification of Bi-Pb-Sr-Ca-Cu-O Compound
- Resputtering Effect on Y_1Ba_2Cu_3O_ Thin Films Prepared by RF-Magnetron Sputtering
- Preparation of Bulky Bi(Pb)-Sr-Ca-Cu-O Superconductor by Magnetized Twin-Roll
- High-Pressure Synthesis of a Bi-Pb-Sr-Ca-Cu-O Superconductor
- 428 イオンビーム支援蒸着法を用いて形成したC-N系薄膜のトライボロジー特性 : Arイオンアシスト効果(O.S.9. 機能薄膜創成と物性)
- X線トポグラフィ-による金属の融解,凝固過程の動的観察
- Photoluminescence Observation of Defects in Silicon : B-3: CRYSTAL GROWTH AND DEFECTS
- MA-超高圧成形により作製したTi-37. 5at%Siバルク体の組織と機械的特性
- An Evidence of Small Domain Superlattice in Cu-10.37 at% Al Solid Solution Alloy
- Fatigue Behaviour of Amorphous Metal Ribbons
- ナノ及び原子的尺度における微構造の変化の電子顕微鏡による解析
- On the Precise Determination of Stacking Fault Energies in Metals and Alloys
- Observational Study on the Dendritie Growth of Al-Mg Single Crystals by Real-Time X-Ray Topography
- Real-Time X-Ray Topographic Observation of Crystal Growth of Gallium from Melt
- DETERMINATION AND IDENTIFICATION OF ATOMIC STRUCTURE OF AMORPHOUS ALLOYS
- Fivefold Twinned Small Copper Crystals Grown by Reduction of CuI
- Stress-Extension Behavior of Copper-Tin Alloy Whiskers
- その場電顕観察法
- 新材料とその用途の開発 : 金属系材料を中心に
- 190 電顕その場実験法による融解・凝固の直接観察(凝固基礎, 製鋼, 日本鉄鋼協会第 113 回(春季)講演大会)