1P1-11 大気圧プラズマ処理の超音波バンプボンディングにおよぼす影響(ポスターセッション)
スポンサーリンク
概要
- 論文の詳細を見る
A transverse ultrasonic vibration was employed to bond the Cu flip chip bump with Cu finished glass substrate. This study was focused on the atmospheric pressure plasma treatment conditions on the ultrasonic bonding strength between the Cu bump and Cu finished substrate because the cleanness and roughness of the bonding surface strongly affected the joint integrity. The optimized ultrasonic conditions greatly enhanced the joint strength bonded using ultrasonic energy, while the excessive plasma treatment degraded the joint integrity. In this study, the mechanisms why the joint strength was determined by the treatment conditions were examined and discussed using X-ray photoelectron spectroscopy (XPS), Auger electron spectroscopy (AES).
- 2008-11-11
著者
-
Lee Jong-bum
School Of Adv. Mat. Sci. & Eng. Sungkyunkwan Univ.
-
Jo Jung-Lae
Sungkyunkwan Univ. , School of Adv. Mat. Sci. & Eng.
-
Koo Ja-Myeong
Sungkyunkwan Univ. , School of Adv. Mat. Sci. & Eng.
-
Lee Jong-Bum
Sungkyunkwan Univ. , School of Adv. Mat. Sci. & Eng.
-
Jung Seung-Boo
Sungkyunkwan Univ. , School of Adv. Mat. Sci. & Eng.
-
Moon Jeong-Hoon
Suwon Sci. College, Dept. of Mechanical Eng.
-
Jung Seung‐boo
School Of Adv. Mat. Sci. & Eng. Sungkyunkwan Univ.
-
Jung Seung‐boo
Sungkyunkwan Univ. Suwon Kor
-
Koo Ja-myeong
Sungkyunkwan Univ. School Of Adv. Mat. Sci. & Eng.
-
Jung Seung-boo
School Of Adv. Mat. Sci. & Eng. Sungkyunkwan Univ.
-
Moon Jeong‐hoon
Suwon Sci. College Dept. Of Mechanical Eng.
-
Lee Jong-bum
Sungkyunkwan Univ. School Of Adv. Mat. Sci. & Eng.
-
Moon Jeong-hoon
Suwon Sci. College Dept. Of Mechanical Eng.
-
Jo Jung-lae
Sungkyunkwan Univ. School Of Adv. Mat. Sci. & Eng.
関連論文
- 2P4-2 超音波によるプリント基板接合における機械特性への表面仕上げの影響(ポスターセッション)
- Microstructure and Mechanical Properties of Friction Stir Spot Welded Galvanized Steel
- Structure-Properties Relations in Friction Stir Spot Welded Low Carbon Steel Sheets for Light Weight Automobile Body
- Effect of Cr Thickness on Adhesion Strength of Cu/Cr/Polyimide Flexible Copper Clad Laminate Fabricated by Roll-to-Roll Process
- 1P1-11 大気圧プラズマ処理の超音波バンプボンディングにおよぼす影響(ポスターセッション)
- Effect of Pin Shapes on Joint Characteristics of Friction Stir Spot Welded AA5J32 Sheet
- Electromigration Behavior of through-Si-via (TSV) Interconnect for 3-D Flip Chip Packaging
- 1Pb-49 超音波接合されたフリップチップパッケージにおける非鉛エポキシソルダの熱特性(ポスターセッション)
- 1Pb-50 金属基板とフレキシブル基板の超音波接合特性(ポスターセッション)
- Microstructures and Mechanical Properties of Double-Friction Stir Welded 2219 Al Alloy
- Longitudinal ultrasonic bonding of electrodes between rigid and flexible printed circuit boards (Special issue: Ultrasonic electronics)
- 1P1-12 フレキシブル電極パターンのガラス基板上への超音波ボンディングと諸条件の影響(ポスターセッション)
- 2-09P-48 プリント基板をフレキシブル基板間の接合強度に及ぼす溶接条件の影響(ポスターセッション 2)
- 2-09-03 超音波ボンディングされたフリップチップバンプとフレキシブル基板の接合強度への大気圧プラズマの影響(強力超音波)
- The Effect of Bi Concentration on Wettability of Cu Substrate by Sn-Bi Solders
- Characterization of Failure Behaviors in Anisotropic Conductive Interconnection
- Effect of atmospheric pressure plasma treatment on transverse ultrasonic bonding of gold flip-chip bump on glass substrate (Special issue: Ultrasonic electronics)
- Assessment of Investment Process for Producing Copper Hollow Spheres
- Reaction Diffusion and Formation of Cu_In_9 and In_Ni_ Phases in the Couple of Indium-Substrates
- Effect of Surface Treatment on the Mechanical Strength of Ultrasonically Bonded Chip on Copper-Coated Glass for Ultra-Fine Pitch Application in Microelectronics
- Effect of Atmospheric Pressure Plasma Treatment on Transverse Ultrasonic Bonding of Gold Flip-Chip Bump on Glass Substrate
- Effect of CaO on AZ31 Mg Strip Castings
- Transmission property of flip chip package with adhesive interconnection for high frequency applications
- Effect of Pd Addition in ENIG Surface Finish on Drop Reliability of Sn-Ag-Cu Solder Joint
- 2Pb4-1 超音波溶接によるRPCB/FPCB境界間のCu-Cu直接接合の信頼性(ポスターセッション)
- Application of Underfill for Flip-Chip Package Using Ultrasonic Bonding
- Effect of Time and Pressure on Ultrasonic Bonding Strength of Flexible Printed Circuit Board to Glass with Nonconductive Film
- Electrical Characterization of Screen-Printed Conductive Circuit with Silver Nanopaste
- Longitudinal Ultrasonic Bonding of Electrodes between Rigid and Flexible Printed Circuit Boards
- Effect of Sintering Temperature on Electrical Properties of Chip on Glass Module with Direct Printing Method (Special Issue : Advanced Electromaterials)
- Microstructures and Mechanical Properties of Friction Stir Welded 2.25Cr-1Mo Steel