Impact of Reflow on the Output Characteristics of Piezoelectric Microelectromechanical System Devices
スポンサーリンク
概要
- 論文の詳細を見る
An animal health monitoring system and a wireless sensor node aimed at preventing the spread of animal-transmitted diseases and improving pastoral efficiency which are especially suitable for chickens, were developed. The sensor node uses a piezoelectric microelectromechanical system (MEMS) device and an event-driven system that is activated by the movements of a chicken. The piezoelectric MEMS device has two functions: a) it measures the activity of a chicken and b) switches the micro-control unit (MCU) of the wireless sensor node from the sleep mode. The piezoelectric MEMS device is required to produce high output voltages when the chicken moves. However, after the piezoelectric MEMS device was reflowed to the wireless sensor node, the output voltages of the piezoelectric MEMS device decreased. The main reason for this might be the loss of residual polarization, which is affected by the thermal load during the reflow process. After the reflow process, we were not able to apply a voltage to the piezoelectric MEMS device; thus, the piezoelectric output voltage was not increased by repoling the piezoelectric MEMS device. To address the thermal load of the reflow process, we established a thermal poling treatment, which achieves a higher temperature than the reflow process. We found that on increasing the thermal poling temperature, the piezoelectric output voltages did not decreased low significantly. Thus, we considered that a thermal poling temperature higher than that of the reflow process prevents the piezoelectric output voltage reduction caused by the thermal load.
- 2012-09-25
著者
-
ITOH Toshihiro
National Institute of Advanced Industrial Science and Technology (AIST)
-
Maeda Ryutaro
National Inst. Of Advanced Industrial Sci. And Technol. (aist) Ibaraki Jpn
-
Kobayashi Takeshi
National Institute For Materials Science
-
Masuda Takashi
The University of Tokyo, Bunkyo, Tokyo 113-8656, Japan
-
Maeda Ryutaro
National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba, Ibaraki 305-8564, Japan
-
Nogami Hirofumi
National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba, Ibaraki 305-8564, Japan
-
Okada Hironao
National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba, Ibaraki 305-8564, Japan
-
Itoh Toshihiro
National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba, Ibaraki 305-8564, Japan
-
Kobayashi Takeshi
National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba, Ibaraki 305-8564, Japan
関連論文
- Inductively Coupled Plasma Reactive Ion Etching of Lead Zirconate Titanate Thin Films for MEMS Application
- Preparation and Application of Lead Zirconate Titanate (PZT) Films Deposited by Hybrid Process : Sol-Gel Method and Laser Ablation
- Effect of Zr/Ti Ratio in Targets on Electrical Properties of Lead Zirconate Titanate Thin Films Derived by Pulsed Laser Deposition on Template Layer
- Microstructure and Electrical Properties of Lead Zirconate Titanate Thin Films Deposited by Excimer Laser Ablation
- Characteristics of Photovoltaic Lead Lanthanum Zirconate Titanate Ceramics in a Layered Film Structure Design
- Relative Sensitivity Factors for Analyzing Carbon and Nitrogen in Steels by Glow Discharge Mass Spectrometry
- Design and Fabrication of 1D and 2D Micro Scanners Actuated by Double Layered Lead Zirconate Titanate (PZT) Bimorph Beams
- Determination of Trace Elements in High-Purity Molybdenum by Solid-Phase Extraction/ICP-MS
- Residual Stress Study of SiO_2/Pt/Pb(Zr,Ti)O_3/Pt Multilayer Structure for Micro Electro Mechanical System Applications
- Infrared-Blocking Filters for Superconducting-Tunnel-Junction Particle Detector
- Piezoelectric Optical Micro Scanner with Built-in Torsion Sensor
- Determination of Trace Amounts of Pb, Mn and Co in Acidic Solution of Vanadium, Niobium and Hafnium by Graphite Furnace Atomic Absorption Spectrometry
- Ultra-Low Power Event-Driven Wireless Sensor Node Using Piezoelectric Accelerometer for Health Monitoring
- Micro Hot Embossing for Replication of Microstructures
- Research on Self-Sensing and Self-Actuated Cantilever for Atomic Force Microscopy Probe
- Sensing Property of Self-Sensitive Piezoelectric Microcantilever Utilizing Pb(Zr0.52/Ti0.48)O3 Thin Film and LaNiO3 Oxide Electrode
- Analysis of Stress in Plasma Enhanced Chemical Vapor Deposition Silicon Nitride Film Irradiated with Ultraviolet Light
- Impact of Reflow on the Output Characteristics of Piezoelectric Microelectromechanical System Devices
- In-Plane Lattice Strain Evaluation in Piezoelectric Microcantilever by Two-Dimensional X-ray Diffraction
- In situ Observation of the Fatigue-Free Piezoelectric Microcantilever by Two-Dimensional X-ray Diffraction
- Preparation and Characterization of Lead Zirconate Titanate Thin Films Derived by Hybrid Processing: Sol-Gel Method and Pulsed Laser Deposition
- Tunable Optical Microscanner Driven by Piezoelectric Actuator
- Microelectromechanical Systems-Based Electrostatic Field Sensor Using Pb(Zr,Ti)O3 Thin Films
- Electrical Properties and Microstructures of Sol-Gel-Deposited Lead Zirconate Titanate Thin Films Crystallized by 28 GHz Microwave Irradiation
- Fabrication of Optical Micro Scanner Driven by PZT Actuators
- Numerical and Experimental Analysis of Intermittent Line-and-Space Patterns in Thermal Nanoimprint
- Electrical Properties and Microstructure of Lead Zirconate Titanate Thin Film In Situ Grown by Hybrid Processing:Sol-Gel Method and Pulsed Laser Deposition
- Pulsed Laser Deposited Lead Zirconate Titanate Thin Films for Micro Actuators
- Growth of (111) One-Axis-Oriented Bi(Mg
- Study on Homogeneous Wafer Level Dielectric Film Preparation Using Chemical Solution Deposition Method
- Piezoelectric Optical Micro Scanner with Built-in Torsion Sensors
- Study on Homogeneous Wafer Level Dielectric Film Preparation Using Chemical Solution Deposition Method