Study of Relationship between Performed Tones and Force of Bow Holding using Silent Violin
スポンサーリンク
概要
- 論文の詳細を見る
The relationship between performed tones and the force of bow holding was investigated by using pressure measurement film and the silent violin. The force of bow holding was classified into six types in this experiment. It was found that the performed tones could be characterized by using spectral envelopes. It was also scientifically identified that the performed tones depend on the distribution of force of bow holding. I believe that the scientific knowledge as visualized in this measurement is useful for an amateur violinist to make progress in violin performance.
- Published by the Japan Society of Applied Physics through the Institute of Pure and Applied Physicsの論文
- 2003-06-15
著者
-
Matsutani Akihiro
Precision And Intelligence Laboratory Tokyo Institute Of Technology
-
Matsutani Akihiro
Precision and Intelligence Laboratory, Tokyo Institute of Technology, 4259 Nagatsuta, Midori-ku, Yokohama 226-8503, Japan
関連論文
- Correlation Length Measurement of Sidewall Roughness of Dry Etched Facet and Its Effect on Reflectivity
- GaInAs/GaAs Micro-Arc Ring Semiconductor Laser
- Characterization of Residual Stress in Active Region due to AlAs Native Oxide of Vertical-Cavity Surface-Emitting Lasers
- In situ Observation of Etching Profile in Inductively Coupled Plasma Etching of GaAs and InP using Long Distance Microscope
- InGaAs/GaAs Strained Quantum Well Lasers with Etched Micro-Corner Reflectors
- GaInAsP Microcylinder (Microdisk) Injection Laser With AlInAs (O_x) Claddings : Optics and quantum Electronics
- Low-Temperature Dry Etching of InP by Inductively Coupled Plasma Using HI/Cl_2
- Cl_2-based Inductively Coupled Plasma Etching of InP Using Internal Antenna
- Measurement of Plasma Density for Control of Etching Profile in Inductively Coupled Plasma Etching of InP
- Emission Spectrochemical Analysis in Dry Etching Process of InP by Cl_2 Inductively Coupled Plasma
- Plasma Diagnostics in Inductively Coupled Plasma Etching Using Cl_2/Xe
- Vertical and Smooth Etching of InP by Cl_2/Xe Inductively Coupled Plasma
- Characterization of Sidewall Damage Induced by Reactive Ion-Beam Etching
- Reactive Ion Beam Etch of GaInAsP/InP Multilayer and Removal of Damaged Layer by Two-Step Etch
- Highly Stable Single Polarization Operation of GaInAs/GaAs Vertical-Cavity Surface-Emitting Laser on GaAs(311)B Substrate under High-Speed Modulation
- Vertical-Cavity Surface-Emitting Laser Array on GaAs(311)B Substrate Exhibiting Single-Transverse Mode and Stable-Polarization Operation
- Relationship Between Type of Bow Holding and Propagation of Performed Sound in Small Concert Hall in Violin Performances
- Study of Rosin Particles on Bow Hair in Violin Performance (Short Note)
- Measurement of Force of Bow Holding and Contact Force between Bow Hair and String in Violin Playing by Pressure Measuring Film : General Physics
- Study on Bridge of Violin by Photoelastic Observation
- Low Bias Voltage Dry Etching of InP by Inductively Coupled Plasma Using SiCl_4/Ar
- C_ Resist Mask of Electron Beam Lithography for Chlorine-Based Reactive Ion Beam Etching
- Surface Temperature Increase in Reactive Ion Beam Etch and Improvement of Profiles by Multistep Etching
- Measurement of Sidewall Roughness of InP Etched by Reactive Ion Bearn Etching
- Vertical and Smooth Microfabrication of InP Using Simple High-Density Plasma System with SmCo Ring Magnet
- Solid Source Dry Etching Process for GaAs and InP
- Mass Effect of Etching Gases in Vertical and Smooth Dry Etching of InP
- Plasma Characterization in Chlorine-Based Reactive Ion Beam Etching and Chemically Assisted Ion Beam Etching
- Plasma Diagnostics in Inductively Coupled Plasma Etching Using Cl2/Xe
- Iodine Solid Source Inductively Coupled Plasma Etching of InP
- Study of Relationship between Performed Tones and Force of Bow Holding using Silent Violin