Effect of Agglomerated TiO_2 Powders with Nanostructure on Microstructure of Thermal Sprayed TiO_2 coatings(Materials, Metallurgy & Weldability)
スポンサーリンク
概要
- 論文の詳細を見る
The effect of nanostructure in agglomerated TiO_2 powders on the microstructure and crystal structure of TiO_2 coatings is examined. TiO_2 coatings on SUS304 plate were sprayed by plasma spray and high velocity oxy-fuel (HVOF) spray using two agglomerated TiO_2 powders with nano and sub-micron structures. The feedstock powders were synthesized via polyvinyl alcohol to produce spherical-shape agglomerates with an average grain size of 30-40μm from the original 200nm and 30nm particles. The powders were then introduced into the plasma and HVOF flame to produce a nanocrystalline coating. For HVOF spray process, various fuel gas pressures were used to find the best parameters. As a result, high anatase ratios could be achieved when HVOF was used at low fuel gas pressure (0.35MPa) by TiO_2 powders with particle sizes of 30nm.
- 大阪大学の論文
著者
-
OHMORI Akira
Osaka University
-
Ohmori A
Osaka Univ. Osaka Jpn
-
NAKADE Katsuyuki
Osaka University
-
Ohmori A
National Institute For Materials Science
-
Nakade K
Osaka University
-
YASUOKA Junichi
Osaka University
-
NAGAYA Tatsuya
Osaka University
関連論文
- Studies on Corrosion Behavior of Ceramic Sprayed Stainless Steels (Report II) : Utilization of Anodic Polarization Curves to Evaluate Corrosion Tendency(Materials, Metallurgy & Weldability)
- Studies on Corrosion Behavior of Ceramic Sprayed Stainless Steels (Report I) : Electrochemical Approach on Ceramic Sprayed Coatings(Materials, Metallurgy & Weldability)
- Spreading of BAg-5 on Pre-Flux Coated Stainless Steel Plate : Function of Fluxes Mixed with NiCl_2 or FeCl_3
- Effect of Annealing on Tensile Properties of Ultrafine-Grained Steels Fabricated by Grooved Warm Rolling
- Serration of Grain Boundary in Ni-30Fe Alloy through High Temperature Deformation
- Dynamic Restoration Process of Ni-30Fe alloy during Hot Deformation
- Effect of Deformation Temperature and Strain Rate on Evolution of Ultrafine Grained Structure through Single-Pass Large-Strain Warm Deformation in a Low Carbon Steel
- Strain-hardening due to Dispersed Cementite for Low Carbon Ultrafine-grained Steels
- 低炭素鋼の高Z大歪加工における超微細粒組織の形成
- Dynamic Restoration Process of Ni-30Fe Alloy during Hot Deformation
- 温間圧延によって製造した超微細フェライト+セメンタイト組織鋼板の特性
- セメンタイト粒子分散による低炭素超微細粒鋼のひずみ硬化設計
- Strength - Ductility Balance of the Ultrafine - grained Ferrite and Cementite Structure
- Effect of Warm Deformation Temperature on Formation of Ultrafine - grained Ferrite Structure for a Low Carbon Si - Mn Steel
- Electric Field Assisted Treatment of Various Plasma Sprayed ZrO_2 Coatings(Physics, Process, Instruments & Measurements)
- Influence of Plasma Spray Conditions on the Structure of Al_2O_3 Coatings(Surface Processing)
- Fracture Behavior of Plasma Sprayed Ceramic Coatings in Scratch Test(Physics, Process, Instrument & Measurement)
- Research on Characteristics of Filler Metal and Flux Influencing on the Toughness of a Carbon Steel Weld : Minor Elements and Alloying Elements Influencing on the Toughness of Weld(Materials, Metallurgy & Weldability)
- Characteristics of Metal Electroplating to Plasma Sprayed Ceramic Coatings(Physics, Process, Instrument & Measurement)
- Untersuchungen der SchweiBguteigenschaften in Abhangigkeiten vom Basizitatsgrad der 50kg/mm^2 Grad agglomerierten UP-SchweiBpulver(Materials, Metallurgy & Weldability)
- Basic Studies on Plasma Sprayed Ceramics Coatings (Report 1) : Erosion Mechanism at ACT-JP Process(Materials, Metallurgy & Weldability)
- Laser Surface Alloying of Plasma Sprayed Coatings with Steel Substrate
- Liquid Mn Sintering of Plasma-Sprayed Ceramic Coating(Physics, Process, Instrument & Measurements)
- Bonding of Si_3N_4 to SS400 Steel with Activated Coating Layers Made by Low-Pressure Plasma Spraying(Physics, Process, Instruments & Measurements)
- Penetration Behavior into Connected Porosities of Plasma Sprayed Al_2O_3 Coatings with Liquid Mn
- Bonding of Al_2O_3 to SS41 Steel with LPC Plasma Sprayed Cu-Ti Two-layer Coatings(Surface Processing)
- Photoresponse of Plasma Sprayed TiO_2-Rutile Semiconductor(Physics, Process, Instruments & Measurements)
- Formation of YBaCu-O System Superconductor by Thermal Spraying(Materials, Metallugy & Weldability)
- Photoanodic Properties of Plasma Sprayed TiO_2 Coatings(Surface Processing)
- Electrical Conductivity of Titanium Oxide (Rutile) Plasma Sprayed Coatings(Physics, Process, Instrument & Measurement)
- Plasma Sprayed Y-Ba-Cu-O System Superconductor
- Solid-State Reaction Bonding of Alumina to Cu-4Ti Alloy(Materials, Metallurgy & Weldability)
- Thermal Shock Resistance of ZrO_2-8wt.%Y_2O_3 Coatings Prepared by Plasma Laser Hybrid Spraying Technique(Materials, Metallurgy & Weldability)
- Charakteristiken der Kavitationserosion von Sialon(Materials, Metallurgy & Weldability)
- Spreading of BAg-5 on Pre-Flux Coated Stainless Steel Plate (Report II) : Function of Fluxes Mixed with CuCl or CoCl_2(Welding Physics, Processes & Instruments)
- Influence of Sigma Phase on Hydrogen Induced Cracking of Duplex Stainless Steel(Materials, Metallurgy & Weldability)
- Effect of Strain on Ultrafine Ferrite Grains formed by Single-Pass Large Strain-High Z Deformation
- A trical to fabricate a 25mm - thick plate with ultrafine - grained ferrite structure
- Structual Studies of Poly(Fluoroalkyl Methacrylate)s and Poly(Fluoroalkyl α-Fluoroacrylate)s
- Three-Dimensional Reconstruction of Fracture Surface Using Area Matching Algorithm(Physics, Processes, Instruments & Measurements)
- Interfacial Phenomena During Field Assisted Bonding of Zirconia to Metals
- Solid State Reaction Bonding of Non-Oxide Ceamics to Metals (Report I) : Bonding of Si_3N_4 to Al Alloys(Materials, Metallurgy & Weldability)
- Pressure and Field-Assisted Bonding of Glass to Aluminum(Materials, Metallurgy & Weldability)
- Characterization of the Structure of Plasma-Sprayed Metallic Silicide Coatings(Materials, Metallurgy & Weldability)
- Studies on Vacuum Brazing (Report II) : Removal of oxide film from stainless steel surface and brazing alloy spreading mechanism(Welding Physics, Process & Instrument)
- Studies on Vacuum Brazing (Report I) : Removing of oxide film from carbon steel surface and brazing alloy spreading mechanism(Welding Physics, Processes & Instruments)
- A Study of the Photo-Catalytic Character of Plasma Sprayed TiO_2 Coatings(Physics, Processes, Instruments & Measurements)
- Control of Oxygen Concentration in Plasma Sprayed TiO_2 Coating by CO_2 Laser Irradiation(Materials, Metallurgy & Weldability)
- Eigenschaften von Flammenjetgespritzten Schichten(Physics, Process & Instrument)
- Influence of Processing Conditions on the Thermal Spraying Coating(Materials, Metallurgy & Weldability)
- Photo-catalytic Decomposition of Tetrachloroethylene (C_2Cl_4) by Plasma Sprayed TiO_2 Coatings(Materials, Metallurgy & Weldability)
- New Approach for Advanced Zirconia Thermal Barrier Coatings by Plasma-Laser Hybrid Spraying Technique(Materials, Metallurgy & Weldability)
- Synthesis of Al_2O_3-AlN Coatings by Low Pressure Plasma Spraying and Nitriding(Physics, Process, Instrument & Measurements)
- Spraying of TiN by a Combined Laser and Low Pressure Plasma Spray System(Physics, Process, Instruments & Measurements)
- Laser Processing of Plasma Sprayed Coatings
- Forschung in Bezug auf die Lotbruchigkeit von Kohlenstoffstahl (Bericht 3) : EinfluB der Zuggeschwindigkeit auf die Lotbrilchigkeit(Materials, Metallurgy & Weldability)
- Study on Liquid Metal Embrittlement of Carbon Steels (Report 2) : Effect of Erosion of Carbon Steel in Liquid Metals on LME(Materials, Metallurgy & Weldability)
- Study on Liquid Metal Embrittlement of Steels (Report 1) : Penetration Behavior of Liquid Metals
- Study on Liquid Metal Embrittlement of Carbon Steels (Report 1) : Penetration Behavior of Liquid Metal(Welding Physics, Processes & Instruments)
- Some Fundamental Research of New Type Powder Oxygen Cutting Method for Stainless Steel(WELDING PHYSICS, PROCESSES AND INSTRUMENTS)
- A Study on Tunneling Flow of Filler Metal in Aluminum Brazing(Welding Physics, Processes & Instruments)
- Examination of Plasma Spray Parameters for YBa_2Cu_3O_ Coatings(Surface Processing)
- WC-Co High Energy Thermal Sprayed Coatings : Structures and Mechanical Properties(Materials, Metallurgy & Weldability)
- Occurrence of Non-Wetted Parts in Dip Soldering (Report-1)(Welding Physics, Processes & Instruments)
- Studies on Brazability of Electric Contact Chip Materials (Report I) : Effect of Surface Preparation of Sintered Tungsten Alloys on Wetting of BAg Filler Metals
- Bonding of Alumina using Cupreous Oxide as Insert Material
- Production Method of High Purity Copper for Semiconductor Use and Evaluation of the Quality (Report I)(Materials, Metallurgy & Weldability)
- Cr_3C_2-Ni-Cr coating properties of HVOF-YAG hybrid spraying and its strengthening mechanism(Physics, Processes, Instruments & Measurements)
- Improvement of Plasma-Sprayed ZrO_2 Coatings by Cr_2O_3 Penetration and Evaluation of Cavitation Erosion(Physics, Processes, Instruments & Measurements)
- Surface Modification of Recycled PET Plate by Particle Implantation and Deposition with Plasma Spraying(Materials, Metallurgy & Weldability)
- Fabrication and Properties of TiO_2 Photo-Catalytic Coatings by Thermal Spraying with TiO_2-Al Agglomerated Powder(Materials, Metallurgy & Weldability)
- The Formation Behavior of TiO_2 Thermal Sprayed Coatings Using Nano-Powders and Their Photo-Catalytic Properties(Materials, Metallurgy & Weldability, INTERNATIONAL SYMPOSIUM OF JWRI 30TH ANNIVERSARY)
- Effect of Agglomerated TiO_2 Powders with Nanostructure on Microstructure of Thermal Sprayed TiO_2 coatings(Materials, Metallurgy & Weldability)
- Characterization of Graded Ti Silicide Coating Formed by Thermal Diffusion Treatment of Low Pressure Plasma Sprayed Silicon Coating on Titanium Substrate(Materials, Metallurgy & Weldability)
- Studies on Vacuum Brazing (Report III) : Effect of manganese added in sliver-copper brazing alloy on brazability(Welding Physics, Process & Instrument)
- Al_2O_3 Diffusion Bonding Using TiH_2 Powder Interlayer(Materials, Metallurgy & Weldability)
- Reaction Spray by Laser-Plasma Jet : Synthesis of TiN Coatings(Physics, Process, Instruments & Measurements)
- Photocatalytic Activity and Photo-absorption of Plasma Sprayed TiO_2-10%Fe_3O_4 Coatings(Materials, Metallurgy & Weldability)
- Fabrication of TiO_2 Photocatalytic Coatings on PET by Plasma Spraying(Materials, Metallurgy & Weldability, INTERNATIONAL SYMPOSIUM OF JWRI 30TH ANNIVERSARY)
- Zu den Faktoren Welche die Adhasion Lichtbogengespritzter Schichten Beeinflussen(Welding Physics, Process & Instrument)
- Fusing of Sprayed Ni-base Coatings by Induction Heating(Physics, Process, Instruments & Measurements)
- Phase Composition and Photocatalytic Activity of TiO_2-Fe_3O_4 Coatings Prepared by Plasma Spraying Technique(Materials, Metallurgy & Weldability, INTERNATIONAL SYMPOSIUM OF JWRI 30TH ANNIVERSARY)
- Evaluation of Composite TiO_2-FeTiO_3 Coatings Prepared by Plasma Spraying Technique(Materials, Metallurgy & Weldability)