Dynamic Restoration Process of Ni-30Fe Alloy during Hot Deformation
スポンサーリンク
概要
- 論文の詳細を見る
- 2002-04-15
著者
-
Torizuka S
National Institute For Materials Science
-
Torizuka S.
National Institute For Materials Science
-
SUH Dong-Woo
Korea Institute of Machinery and Materials
-
Nagai K
Univ. Hyogo
-
Inoue T
National Inst. Metals Sci.
-
Inoue Tadanobu
National Institute For Materials Science
-
Inoue Tadanobu
Nims
-
Inoue Tadanobu
Steel Research Center National Institute For Materials Science
-
Inoue Tadanobu
Metallurgical Processing Group Steel Research Center National Institute For Materials Science
-
Inoue Tadanobu
Innovative Materials Engineering Laboratory National Institute For Materials Science
-
Inoue Tadanobu
Innovative Materials Engineering Lab. National Institute For Materials Science
-
Inoue Tadanobu
National Institute For Metals Science
-
TORIZUKA Shiro
National Institute for Materials Science
-
OHMORI Akio
National Research Institute for Metals
-
SUH Dong-woo
National Institute for Materials Science
-
Torizuka S
National Inst. For Materials Sci. Tsukuba Jpn
-
Torizuka Shiro
National Inst. For Materials Sci.
-
NAKAI Kotobu
National Institute for Materials Sciense
-
Ohmori Akio
National Institute For Materials Science
-
Ohmori A
Technical Research Laboratories Kawasaki Steel Corporation
-
Nagai K
Materials Research For The Environment And Energy National Institute For Materials Science
-
Nagai K
Metallurgical Processing Group Steel Research Center National Institute For Materials Science
-
Torizuka Shiro
National Institute Of Materials Science
-
Torizuka Shiro
National Institute For Materials Science Nims
-
Torizuka Shiro
Frontier Research Center For Structural Materials Nrim
-
Torizuka Shiro
National Research Institute For Metals
-
Torizuka Shiro
National Research Institute For Metals Frontier Research Center For Structural Materials Nrim
-
Inoue T
National Institute For Materials Sciense
-
Suh Dong-woo
Eco-materials Research Center Korea Institute Of Machinery And Materials
-
Ohmori A
National Institute For Materials Science
-
Nagai K
Exploratory Materials Research Laboratory For Reliability And Safety National Institute For Material
関連論文
- Characteristics of the Cold-Rolling Texture in a Multi-Layered Material Composed of SUS301 and SUS420J2 Steels
- Variant Selection in Mechanically-induced Martensitic Transformation of Metastable Austenitic Steel
- Evaluation of Dislocation Density from the Flow Curves of Hot Deformed Austenite
- FEM Modeling of Flow Curves for Ferrite/Pearlite Two-Phase Steels
- 低炭素鋼の種々の微細組織における脆性破壊支配因子としての有効結晶粒径
- Effect of Shear Deformation on Microstructural Evolution of Ni-30Fe Alloy during Hot Deformation
- Effect of Initial Grain Orientation on Evolution of Deformed Microstructure in Hot Compressed Ni-30Fe Alloy
- Plastic strain due to isothermal transformation from austenite to ferrite in IF and low carbon steels
- Ferrite Grain Size Formed by Large Strain-High Z Deformation in a 0.15C Steel
- Orientation Distribution of Proeutectoid Ferrite Nucleated at Prior Austenite Grain Boundaries in Vanadium-added Steel
- The fiber components in the biaxially warm-deformed low-carbon steels
- Analysis of the dislocation structure in warm - deformed steels by the modified Warren - Averbach X - ray profile method
- Effect of Manganese Segregation on Fine-grained Ferrite Structure in Low-carbon Steel Slabs
- Improvement of strength-and-toughness balance of recycled steel through ultrarefinement of grain size
- オーステナイト粒径とひずみを変化させたときのフェライト粒組織 〜 再加熱鋳造材の場合 〜
- オーステナイト粒径とひずみを変化させたときのフェライト粒組織 - 再加熱鋳造材の場合 -
- Effect of Annealing on Tensile Properties of Ultrafine-Grained Steels Fabricated by Grooved Warm Rolling
- In-situ Observation of Intragranular Ferrite Nucleation at Oxide Particles
- Serration of Grain Boundary in Ni-30Fe Alloy through High Temperature Deformation
- Dynamic Restoration Process of Ni-30Fe alloy during Hot Deformation
- 温間多方向加工によって形成される微細フェライト粒組織
- Effect of Shear Deformation of Development of Fine-grained Ferrite Structures
- Microstructural Design through Multi-Direction Deformation
- Analysis on Refinement of Columnar γ Grain by Phosphorus in Continuously Cast 0.1mass% Carbon Steel
- Influence of Phosphorus on Solidification Structure in Continuously Cast 0.1mass% Carbon Steel
- 低炭素鋼CC材の柱状γ粒におけるPによる微細化効果
- 高P含有低炭素鋼CC材の組織に及ぼす凝固モードの影響
- Structure of Continuously Cast Slab of High Phosphorus 0.1mass%C Steel
- Subsurface Crack Generation in High-cycle Fatigue for High Strength Alloys
- Dynamic Recrystallization of Ferrite during Large Strain Warm Compression Of Ultra-Low Carbon Steel
- Classification of Microstructural Evolution During Single Pass-Large Strain-High Z Deformation of a 0.15 C Steel
- Effect of Deformation Temperature and Strain Rate on Evolution of Ultrafine Grained Structure through Single-Pass Large-Strain Warm Deformation in a Low Carbon Steel
- Strain-hardening due to Dispersed Cementite for Low Carbon Ultrafine-grained Steels
- 低炭素鋼の高Z大歪加工における超微細粒組織の形成
- Dynamic Restoration Process of Ni-30Fe Alloy during Hot Deformation
- 温間圧延によって製造した超微細フェライト+セメンタイト組織鋼板の特性
- セメンタイト粒子分散による低炭素超微細粒鋼のひずみ硬化設計
- オーステナイト粒径とひずみを変化させたときのフェライト粒組織 〜再加熱鋳造材の場合〜
- Strength - Ductility Balance of the Ultrafine - grained Ferrite and Cementite Structure
- Effect of Warm Deformation Temperature on Formation of Ultrafine - grained Ferrite Structure for a Low Carbon Si - Mn Steel
- Fine Ferrite Formation from Deformed Austenite with Different Grain Size
- Calculation of Transformation Plasticity during Coherent Transformation of Steel
- PREFACE
- PREFACE
- PREFACE
- Microstructural and Micro-textural Evolution during Single Pass High Z-large Strain Deformation of a 0.15C Steel
- Prediction on Nominal Stress-Strain Curve of Isotropic Polycrystal Ti-15-3-3-3 Sheet by FE Analysis
- Research on Characteristics of Filler Metal and Flux Influencing on the Toughness of a Carbon Steel Weld : Minor Elements and Alloying Elements Influencing on the Toughness of Weld(Materials, Metallurgy & Weldability)
- Untersuchungen der SchweiBguteigenschaften in Abhangigkeiten vom Basizitatsgrad der 50kg/mm^2 Grad agglomerierten UP-SchweiBpulver(Materials, Metallurgy & Weldability)
- Textures introduced by high-cross-angle cross rolling
- 高リン低炭素鋼ストリップ鋳片圧延材の機械的性質
- Effect of Diffusion of {100}Parallel to the ND Plane on the Charpy Impact Properties in Low Carbon Steels
- In-situ Observation of γ/α Phase Transformation in Low Carbon Steel by Laser Microscopy
- 高リン低炭素鋼のストリップ鋳片の特徴
- Continuously Cast 0.1 mass pct. C Steele with High Phosphorus: Microstructural Design and Control
- Continuously Cast 0.1 mass pct. C Steels with High Phosphorus : Microstructural Design and Control
- Continuously Cast 0.1 mass pct. C Steels with High Phosphorus: Microstructural Design and Control
- Improved Strength - and - Toughness Balance of P - added Low Carbon Steel through Ultrarefinement of Ferrite Grain Size
- Strength and Toughness Balance of Ultrafine - Grained Low Carbon Steel
- Structure of rapid solidification sheet in high P low carbon steel
- A New Evaluation Method of Hydrogen Embrittlement Fracture for High Strength Steel by Local Approach
- Evaluation of hydrogen embrittlement susceptibility for high strength steels with Local Approach by considering hydrogen distribution : Examination for estimation of delayed fracture properties-11
- Evaluation of Plastic Deformation Limit by Circumferentially Notched Tension Test
- Ultrafine Grain Structure through Dynamic Recrystallization for Type 304 Stainless Steel
- Novel processing recyclable and high performance steel bar
- Flow Stress Analysis using the Kocks-Mecking Model for Ferrite-Cementite Steels with Various Ferrite Grain Sizes
- High-speed Deformation for an Ultrafine-grained Ferrite-Pearlite Steel
- Delamination Toughening of Ultrafine Grain Structure Steels Processed through Tempforming at Elevated Temperatures
- Distributions of Hardness and Strain during Compression in Pure Aluminum Processed with Equal-Channel Angular Pressing and Subsequent Annealing
- Recrystallization and Grain Growth Behavior in Severe Cold-rolling Deformed SUS316L Steel under Anisothermal Annealing Condition
- Crystallographic Texture of Warm Caliber-rolled Low Carbon Steel
- Variant Selection in Mechanically-induced Martensitic Transformation of Metastable Austenitic Steel
- Analysis of Buckling and Interfacial Debonding of Galvannealed Coating Layer on Steel Substrates under Applied Tensile Strain
- Prediction on Nominal Stress-Strain Curve of Anisotropic Polycrystal with Texture by FE Analysis
- Effect of Strain on Ultrafine Ferrite Grains formed by Single-Pass Large Strain-High Z Deformation
- A trical to fabricate a 25mm - thick plate with ultrafine - grained ferrite structure
- Microstructure-Mechanical Properties Correlation in Ultrafine Grained Steels Processed by Large Strain Warm Deformation
- Effect of SiC and ZrO_2 on sinterability and mechanical properties of Titanium Nitride, Titanium Carbonitride and Titanium Diboride
- Evolution of Fine Ferrite Structure in Continuously Cast 0.1mass%C steel with 100mm-thickness
- Prediction of Nominal Stress-Strain Curves of a Multi-Layered Composite Material by FE Analysis
- Effect of Shear Strain on the Microstructural Evolution of a Low Carbon Steel during Warm Deformation
- Effect of Strain on Microstructural Evolution under Warm Deformation in an Ultra-Low Carbon Steel
- 超微細フェライト粒組織形成におけるオーステナイト粒径の重要度
- Luders Deformation in Submicron-grained Ferrite steels
- True Stress-True Strain Relations with Very Low Strain Rates at Room Temperature for an Austenitic 25Cr-19Ni Steel
- Toughness of ultrafine - grained ferrite steel plate fabricated by cross - roll rolling
- Ultrafine grain structure through dynamic recrystallization for SUS 304 stainless steel
- Effect of Cu, Sn, and Sb on Cold Forgeability of a 0.5% Carbon Steel
- 超細粒鋼の被削性について
- Numerical analysis of deformation behavior for over-matched weld joints
- Ultra-steel : Fabrication Makes New Material Structure(Synergy by Microstructuring)
- パンキーキγ粒厚さと生成する粒界α厚さの関係
- Excellent Total Mechanical-Properties-Balance of 5% Mn, 30000 MPa% Steel
- 大ひずみ加工下で均一・微細フェライト粒組織形成に必要なひずみ
- 超微細フェライト粒組織形成におけるオーステナイト粒径の重要度
- 超微細フェライト粒組織形成におけるオーステナイト粒径の重要度
- Prediction of Prior Austenite Grain Size of High-phosphorous Steels through Phase Transformation Simulation
- Public Research Institutes for High-Performance Steels in China
- 0.1mass%C 再加熱スラブ材の強加工による組織変化
- Effect of Tensile Strength and Microstructure on Notch-fatigue Properties of Ultrafine-grained Steels