Research on Characteristics of Filler Metal and Flux Influencing on the Toughness of a Carbon Steel Weld : Minor Elements and Alloying Elements Influencing on the Toughness of Weld(Materials, Metallurgy & Weldability)
スポンサーリンク
概要
- 論文の詳細を見る
To understand the influence of minor elements and alloying elements on the toughness of a mild steel and a 50kg/mm^2 class steel, low hydrogen type electrodes of basicity 4.2 was selected for fixing Fe-Ti and Fe-B in the flux respectively 0.7 and 1.5%. From this experiments A-type electrode of 1.15%Mn-0.9%Ni-Ti-B rather than B-Type electrodes 1.35%Mn-0.5%Ni-Ti-B showed superior impact characteristics below -40℃ while upper shelf energy is lowered at the room temperature. Also A-Type electrode showed lower deviation of stable impact value and smooth transition curve at various temperature.
- 大阪大学の論文
著者
-
Arata Y
Osaka Univ. Osaka Jpn
-
OHMORI Akira
Osaka University
-
HAN H.
Osaka University
-
OHMORI A.
Osaka University
-
ARATA Y.
Osaka University
-
Ohmori Akio
National Institute For Materials Science
-
Ohmori A
Osaka Univ. Osaka Jpn
-
Ohmori A
National Institute For Materials Science
-
Han H.
Hyundai Welding & Metal Co. Ltd.
関連論文
- Studies on Corrosion Behavior of Ceramic Sprayed Stainless Steels (Report II) : Utilization of Anodic Polarization Curves to Evaluate Corrosion Tendency(Materials, Metallurgy & Weldability)
- Studies on Corrosion Behavior of Ceramic Sprayed Stainless Steels (Report I) : Electrochemical Approach on Ceramic Sprayed Coatings(Materials, Metallurgy & Weldability)
- Spreading of BAg-5 on Pre-Flux Coated Stainless Steel Plate : Function of Fluxes Mixed with NiCl_2 or FeCl_3
- Transient Arc Diagnosis with OMA(Welding Physics, Processes & Instruments)
- Pulsed High Current Heating of a Microwave Plasma at Atmospheric Pressure
- High Power Microwave Plasma Beam as a Heat Source (Report IV) : Application to Cutting
- Effects of Horn Connected with Gas Tunnel Type Plasma Spraying Torch
- Gas Tunnel Type Plasma Spraying Apparatus(Welding Physics, Process & Instrument)
- Transferred Type Plasma Jet Using Gas Tunnel(Welding Physics, Process & Instrument)
- Production of ECR Mirror Plasma by High Power Millimeter-Wave Radiation : Nuclear Science, Plasmas and Electric Discharges
- ECR Plasma in a High Power Millimeter-Wave Beam (Report IV) : Contribution of Higher Harmonic Resonance Heating(Physics, Process & Instrument)
- ECR Plasma in a High Power Millimeter-Wave Beam (Report III) : Difference in Plasma Property by Axial and Radial Launches(Welding Physics, Process & Instrument)
- ECR Plasma in a High Power Millimeter-Wave Beam (Report II) : Time Variation of Electron Density(Welding Physics, Process & Instrument)
- ECR Plasma in a High Power Millimeter-Wave Beam (Report 1)(Welding Physics, Process & Instrument)
- Electron Beam Melting of Aluminum Alloy by Beam Oscillation(Physics, Process, Instrument & Measurement)
- Electric Field Assisted Treatment of Various Plasma Sprayed ZrO_2 Coatings(Physics, Process, Instruments & Measurements)
- Influence of Plasma Spray Conditions on the Structure of Al_2O_3 Coatings(Surface Processing)
- Porosity Measurement of Ceramic Coating by Image Processing Method(Physics, Process, Instrument & Measurement)
- Fracture Behavior of Plasma Sprayed Ceramic Coatings in Scratch Test(Physics, Process, Instrument & Measurement)
- Effect of Spraying Condition on Ceramic Coating Quality in Gas Tunnel Type Plasma Spraying(Physics, Process, Instrument & Measurement)
- Study on the Strength of Explosive Plugged Part under the Environment of Steam Generator
- Uber Eigenschaften von Stopselteil Explosiver Haftung durch WarmestoB(Mechanics, Strength & Structural Design)
- Research on Characteristics of Filler Metal and Flux Influencing on the Toughness of a Carbon Steel Weld : Minor Elements and Alloying Elements Influencing on the Toughness of Weld(Materials, Metallurgy & Weldability)
- Characteristics of Metal Electroplating to Plasma Sprayed Ceramic Coatings(Physics, Process, Instrument & Measurement)
- Struktur der Al_2O_3 Schichten nach dem Gas Tunnel Plasma-Spritzgerat(Physics, Process, Instrument & Measurement)
- Untersuchungen der SchweiBguteigenschaften in Abhangigkeiten vom Basizitatsgrad der 50kg/mm^2 Grad agglomerierten UP-SchweiBpulver(Materials, Metallurgy & Weldability)
- Deposit Characteristics of Sprayed Powder by Gas Tunnel Type Plasma Spraying Apparatus(Physics, Process & Instrument)
- Basic Studies on Plasma Sprayed Ceramics Coatings (Report 1) : Erosion Mechanism at ACT-JP Process(Materials, Metallurgy & Weldability)
- Dynamic Characteristics of Variable Frequency Pulsed TIG Arc(Welding Physics, Process & Instrument)
- Basic Characteristics of Gas Tunnel Type Plasma Jet Torch
- Experimental Study on Dynamic Properties of Power Sources for MIG/MAG Welding(Welding Physics, Process & Instrument)
- Pressure Distribution and Basic Properties of Gas Tunnel Type Plasma Jet Torch(Welding Physics, Process & Instrument)
- Saturation Behavior of Balmer-Line Fluorescences in a Hydrogen Plasma
- Laser Surface Alloying of Plasma Sprayed Coatings with Steel Substrate
- Liquid Mn Sintering of Plasma-Sprayed Ceramic Coating(Physics, Process, Instrument & Measurements)
- Bonding of Si_3N_4 to SS400 Steel with Activated Coating Layers Made by Low-Pressure Plasma Spraying(Physics, Process, Instruments & Measurements)
- Penetration Behavior into Connected Porosities of Plasma Sprayed Al_2O_3 Coatings with Liquid Mn
- Bonding of Al_2O_3 to SS41 Steel with LPC Plasma Sprayed Cu-Ti Two-layer Coatings(Surface Processing)
- Suppression Mechanism of Overlapping Defects in High Speed TEB Welding
- High Speed Welding of Thin Stainless Steel Plates by Tandem Electron Beam
- Bending Strength of CO_2 Laser Welded Joints of 87-0X1.20980BFF1F4DP+0l_2O_3 Ceramics
- High Power CO_2 Laser Welding of Al_2O_3 Ceramics(Physics, Process, Instruments & Measurements)
- Photoresponse of Plasma Sprayed TiO_2-Rutile Semiconductor(Physics, Process, Instruments & Measurements)
- Formation of YBaCu-O System Superconductor by Thermal Spraying(Materials, Metallugy & Weldability)
- Photoanodic Properties of Plasma Sprayed TiO_2 Coatings(Surface Processing)
- Characteristics of 500kV Ultra-High Voltage Electron Beam Heat Source (Report II) : Deep Penetration by Flat Position Welding(Physics, Process, Instruments & Measurement)
- Electrical Conductivity of Titanium Oxide (Rutile) Plasma Sprayed Coatings(Physics, Process, Instrument & Measurement)
- Tandem Electron Beam Welding (Report IX) : High Speed Tandem Electron Beam Welding(Physics, Process, Instrument & Measurement)
- High Power CO_2 Laser Cutting and Welding of Ceramics(Physics, Process, Instrument & Measurement)
- Characteristics of 600kV Class Ultra High Voltage Electron Beam Heat Source(Physics, Process, Instrument & Measurement)
- Plasma Sprayed Y-Ba-Cu-O System Superconductor
- Solid-State Reaction Bonding of Alumina to Cu-4Ti Alloy(Materials, Metallurgy & Weldability)
- Thermal Shock Resistance of ZrO_2-8wt.%Y_2O_3 Coatings Prepared by Plasma Laser Hybrid Spraying Technique(Materials, Metallurgy & Weldability)
- Das Laser-Schweissen von Aluminium und Alu-Legierungen
- Charakteristiken der Kavitationserosion von Sialon(Materials, Metallurgy & Weldability)
- Spreading of BAg-5 on Pre-Flux Coated Stainless Steel Plate (Report II) : Function of Fluxes Mixed with CuCl or CoCl_2(Welding Physics, Processes & Instruments)
- Structual Studies of Poly(Fluoroalkyl Methacrylate)s and Poly(Fluoroalkyl α-Fluoroacrylate)s
- Interfacial Phenomena During Field Assisted Bonding of Zirconia to Metals
- Solid State Reaction Bonding of Non-Oxide Ceamics to Metals (Report I) : Bonding of Si_3N_4 to Al Alloys(Materials, Metallurgy & Weldability)
- Pressure and Field-Assisted Bonding of Glass to Aluminum(Materials, Metallurgy & Weldability)
- Characterization of the Structure of Plasma-Sprayed Metallic Silicide Coatings(Materials, Metallurgy & Weldability)
- Studies on Vacuum Brazing (Report II) : Removal of oxide film from stainless steel surface and brazing alloy spreading mechanism(Welding Physics, Process & Instrument)
- Studies on Vacuum Brazing (Report I) : Removing of oxide film from carbon steel surface and brazing alloy spreading mechanism(Welding Physics, Processes & Instruments)
- A Study of the Photo-Catalytic Character of Plasma Sprayed TiO_2 Coatings(Physics, Processes, Instruments & Measurements)
- Control of Oxygen Concentration in Plasma Sprayed TiO_2 Coating by CO_2 Laser Irradiation(Materials, Metallurgy & Weldability)
- Eigenschaften von Flammenjetgespritzten Schichten(Physics, Process & Instrument)
- Influence of Processing Conditions on the Thermal Spraying Coating(Materials, Metallurgy & Weldability)
- Photo-catalytic Decomposition of Tetrachloroethylene (C_2Cl_4) by Plasma Sprayed TiO_2 Coatings(Materials, Metallurgy & Weldability)
- New Approach for Advanced Zirconia Thermal Barrier Coatings by Plasma-Laser Hybrid Spraying Technique(Materials, Metallurgy & Weldability)
- Synthesis of Al_2O_3-AlN Coatings by Low Pressure Plasma Spraying and Nitriding(Physics, Process, Instrument & Measurements)
- Spraying of TiN by a Combined Laser and Low Pressure Plasma Spray System(Physics, Process, Instruments & Measurements)
- Laser Processing of Plasma Sprayed Coatings
- Properties of ECR Plasma in a Simple Mirror Field II : Spatial Structure of the Plasma
- Properties of ECR Plasma in a Simple Mirror Field I : Correlation in Cold and Hot Electron Production
- Effect of Plasma Opacify on the Doppler-Free Polarization Spectrum in a Hydrogen Plasma
- Laser-Induced Fluorescence and Doppler-Free Polarization Spectra in a Low Density Hydrogen Plasma
- Structure of ECR Mirror Plasma(Welding Physics, Process & Instrument)
- Measurement of Soft X-ray from Hot Electron Plasma in a Magnetic Field(Welding Physics, Process & Instrument)
- Thermal Plasma Diagnostics Using Tunable Dye Laser (Report III)(Welding Physics, Process & Instrument)
- Thermal Plasma Diagnostics Using Tunable Dye Laser (Report II)(Welding Physics, Process & Instrument)
- Multichannel Measurement of Soft X-ray with MCP and OMA System(Welding Physics, Process & Instrument)
- Thermal Plasma Diagnostics Using Tunable Dye Laser (Report I) : Resonance Fluorescence in a High Power Microwave Discharge(Welding Physics, Process & Instrument)
- Two-Dimensional Multichannel Spectroscopy of a Pulsed Arc
- Forschung in Bezug auf die Lotbruchigkeit von Kohlenstoffstahl (Bericht 3) : EinfluB der Zuggeschwindigkeit auf die Lotbrilchigkeit(Materials, Metallurgy & Weldability)
- Study on Liquid Metal Embrittlement of Carbon Steels (Report 2) : Effect of Erosion of Carbon Steel in Liquid Metals on LME(Materials, Metallurgy & Weldability)
- Study on Liquid Metal Embrittlement of Steels (Report 1) : Penetration Behavior of Liquid Metals
- Study on Liquid Metal Embrittlement of Carbon Steels (Report 1) : Penetration Behavior of Liquid Metal(Welding Physics, Processes & Instruments)
- Some Fundamental Research of New Type Powder Oxygen Cutting Method for Stainless Steel(WELDING PHYSICS, PROCESSES AND INSTRUMENTS)
- A Study on Tunneling Flow of Filler Metal in Aluminum Brazing(Welding Physics, Processes & Instruments)
- Tandem Electron Beam Welding (Report VIII) : Control of Molten Metal Flow(Physics, Process, Instrument & Measurement)
- Examination of Plasma Spray Parameters for YBa_2Cu_3O_ Coatings(Surface Processing)
- WC-Co High Energy Thermal Sprayed Coatings : Structures and Mechanical Properties(Materials, Metallurgy & Weldability)
- Occurrence of Non-Wetted Parts in Dip Soldering (Report-1)(Welding Physics, Processes & Instruments)
- Studies on Brazability of Electric Contact Chip Materials (Report I) : Effect of Surface Preparation of Sintered Tungsten Alloys on Wetting of BAg Filler Metals
- Bonding of Alumina using Cupreous Oxide as Insert Material
- Production Method of High Purity Copper for Semiconductor Use and Evaluation of the Quality (Report I)(Materials, Metallurgy & Weldability)
- Cr_3C_2-Ni-Cr coating properties of HVOF-YAG hybrid spraying and its strengthening mechanism(Physics, Processes, Instruments & Measurements)
- Improvement of Plasma-Sprayed ZrO_2 Coatings by Cr_2O_3 Penetration and Evaluation of Cavitation Erosion(Physics, Processes, Instruments & Measurements)
- Surface Modification of Recycled PET Plate by Particle Implantation and Deposition with Plasma Spraying(Materials, Metallurgy & Weldability)
- Fabrication and Properties of TiO_2 Photo-Catalytic Coatings by Thermal Spraying with TiO_2-Al Agglomerated Powder(Materials, Metallurgy & Weldability)