Fusing of Sprayed Ni-base Coatings by Induction Heating(Physics, Process, Instruments & Measurements)
スポンサーリンク
概要
- 論文の詳細を見る
In this research, the optimum temperature for induction fusing of Ni-base alloy coatings was studied, and the properties and microstructures of coatings were investigated. The properties were also compared with those of coatings that were fused with either an oxy-acetylene flame or in a furnace. A temperature range from 1323K to 1343K was the optimum condition for induction fusing. Induction fusing at this temperature achieved the following properties ; a coating hardness of up to 800Hv, and coatings that were denser and with a smoother surface than those fused with flames or in a furnace.
- 大阪大学の論文
著者
-
OHMORI Akira
Osaka University
-
Takasaki Nobuhiro
Dai-ichi High Frequency Co. Ltd.
-
TOMIGUCHI Akihiko
Dai-ichi High Frequency Co., LTD.
-
SOCHI Yoshinobu
Dai-ichi High Frequency Co., LTD.
-
Sochi Yoshinobu
Dai-ichi High Frequency Co. Ltd.
関連論文
- Studies on Corrosion Behavior of Ceramic Sprayed Stainless Steels (Report II) : Utilization of Anodic Polarization Curves to Evaluate Corrosion Tendency(Materials, Metallurgy & Weldability)
- Studies on Corrosion Behavior of Ceramic Sprayed Stainless Steels (Report I) : Electrochemical Approach on Ceramic Sprayed Coatings(Materials, Metallurgy & Weldability)
- Spreading of BAg-5 on Pre-Flux Coated Stainless Steel Plate : Function of Fluxes Mixed with NiCl_2 or FeCl_3
- Electric Field Assisted Treatment of Various Plasma Sprayed ZrO_2 Coatings(Physics, Process, Instruments & Measurements)
- Influence of Plasma Spray Conditions on the Structure of Al_2O_3 Coatings(Surface Processing)
- Fracture Behavior of Plasma Sprayed Ceramic Coatings in Scratch Test(Physics, Process, Instrument & Measurement)
- Research on Characteristics of Filler Metal and Flux Influencing on the Toughness of a Carbon Steel Weld : Minor Elements and Alloying Elements Influencing on the Toughness of Weld(Materials, Metallurgy & Weldability)
- Characteristics of Metal Electroplating to Plasma Sprayed Ceramic Coatings(Physics, Process, Instrument & Measurement)
- Untersuchungen der SchweiBguteigenschaften in Abhangigkeiten vom Basizitatsgrad der 50kg/mm^2 Grad agglomerierten UP-SchweiBpulver(Materials, Metallurgy & Weldability)
- Basic Studies on Plasma Sprayed Ceramics Coatings (Report 1) : Erosion Mechanism at ACT-JP Process(Materials, Metallurgy & Weldability)
- Laser Surface Alloying of Plasma Sprayed Coatings with Steel Substrate
- Liquid Mn Sintering of Plasma-Sprayed Ceramic Coating(Physics, Process, Instrument & Measurements)
- Bonding of Si_3N_4 to SS400 Steel with Activated Coating Layers Made by Low-Pressure Plasma Spraying(Physics, Process, Instruments & Measurements)
- Penetration Behavior into Connected Porosities of Plasma Sprayed Al_2O_3 Coatings with Liquid Mn
- Bonding of Al_2O_3 to SS41 Steel with LPC Plasma Sprayed Cu-Ti Two-layer Coatings(Surface Processing)
- Photoresponse of Plasma Sprayed TiO_2-Rutile Semiconductor(Physics, Process, Instruments & Measurements)
- Formation of YBaCu-O System Superconductor by Thermal Spraying(Materials, Metallugy & Weldability)
- Photoanodic Properties of Plasma Sprayed TiO_2 Coatings(Surface Processing)
- Electrical Conductivity of Titanium Oxide (Rutile) Plasma Sprayed Coatings(Physics, Process, Instrument & Measurement)
- Plasma Sprayed Y-Ba-Cu-O System Superconductor
- Solid-State Reaction Bonding of Alumina to Cu-4Ti Alloy(Materials, Metallurgy & Weldability)
- Thermal Shock Resistance of ZrO_2-8wt.%Y_2O_3 Coatings Prepared by Plasma Laser Hybrid Spraying Technique(Materials, Metallurgy & Weldability)
- Charakteristiken der Kavitationserosion von Sialon(Materials, Metallurgy & Weldability)
- Spreading of BAg-5 on Pre-Flux Coated Stainless Steel Plate (Report II) : Function of Fluxes Mixed with CuCl or CoCl_2(Welding Physics, Processes & Instruments)
- Structual Studies of Poly(Fluoroalkyl Methacrylate)s and Poly(Fluoroalkyl α-Fluoroacrylate)s
- Interfacial Phenomena During Field Assisted Bonding of Zirconia to Metals
- Solid State Reaction Bonding of Non-Oxide Ceamics to Metals (Report I) : Bonding of Si_3N_4 to Al Alloys(Materials, Metallurgy & Weldability)
- Pressure and Field-Assisted Bonding of Glass to Aluminum(Materials, Metallurgy & Weldability)
- Characterization of the Structure of Plasma-Sprayed Metallic Silicide Coatings(Materials, Metallurgy & Weldability)
- Studies on Vacuum Brazing (Report II) : Removal of oxide film from stainless steel surface and brazing alloy spreading mechanism(Welding Physics, Process & Instrument)
- Studies on Vacuum Brazing (Report I) : Removing of oxide film from carbon steel surface and brazing alloy spreading mechanism(Welding Physics, Processes & Instruments)
- A Study of the Photo-Catalytic Character of Plasma Sprayed TiO_2 Coatings(Physics, Processes, Instruments & Measurements)
- Control of Oxygen Concentration in Plasma Sprayed TiO_2 Coating by CO_2 Laser Irradiation(Materials, Metallurgy & Weldability)
- Eigenschaften von Flammenjetgespritzten Schichten(Physics, Process & Instrument)
- Influence of Processing Conditions on the Thermal Spraying Coating(Materials, Metallurgy & Weldability)
- Photo-catalytic Decomposition of Tetrachloroethylene (C_2Cl_4) by Plasma Sprayed TiO_2 Coatings(Materials, Metallurgy & Weldability)
- New Approach for Advanced Zirconia Thermal Barrier Coatings by Plasma-Laser Hybrid Spraying Technique(Materials, Metallurgy & Weldability)
- Synthesis of Al_2O_3-AlN Coatings by Low Pressure Plasma Spraying and Nitriding(Physics, Process, Instrument & Measurements)
- Spraying of TiN by a Combined Laser and Low Pressure Plasma Spray System(Physics, Process, Instruments & Measurements)
- Laser Processing of Plasma Sprayed Coatings
- Forschung in Bezug auf die Lotbruchigkeit von Kohlenstoffstahl (Bericht 3) : EinfluB der Zuggeschwindigkeit auf die Lotbrilchigkeit(Materials, Metallurgy & Weldability)
- Study on Liquid Metal Embrittlement of Carbon Steels (Report 2) : Effect of Erosion of Carbon Steel in Liquid Metals on LME(Materials, Metallurgy & Weldability)
- Study on Liquid Metal Embrittlement of Steels (Report 1) : Penetration Behavior of Liquid Metals
- Study on Liquid Metal Embrittlement of Carbon Steels (Report 1) : Penetration Behavior of Liquid Metal(Welding Physics, Processes & Instruments)
- Some Fundamental Research of New Type Powder Oxygen Cutting Method for Stainless Steel(WELDING PHYSICS, PROCESSES AND INSTRUMENTS)
- A Study on Tunneling Flow of Filler Metal in Aluminum Brazing(Welding Physics, Processes & Instruments)
- Examination of Plasma Spray Parameters for YBa_2Cu_3O_ Coatings(Surface Processing)
- WC-Co High Energy Thermal Sprayed Coatings : Structures and Mechanical Properties(Materials, Metallurgy & Weldability)
- Occurrence of Non-Wetted Parts in Dip Soldering (Report-1)(Welding Physics, Processes & Instruments)
- Studies on Brazability of Electric Contact Chip Materials (Report I) : Effect of Surface Preparation of Sintered Tungsten Alloys on Wetting of BAg Filler Metals
- Bonding of Alumina using Cupreous Oxide as Insert Material
- Production Method of High Purity Copper for Semiconductor Use and Evaluation of the Quality (Report I)(Materials, Metallurgy & Weldability)
- Cr_3C_2-Ni-Cr coating properties of HVOF-YAG hybrid spraying and its strengthening mechanism(Physics, Processes, Instruments & Measurements)
- Improvement of Plasma-Sprayed ZrO_2 Coatings by Cr_2O_3 Penetration and Evaluation of Cavitation Erosion(Physics, Processes, Instruments & Measurements)
- Surface Modification of Recycled PET Plate by Particle Implantation and Deposition with Plasma Spraying(Materials, Metallurgy & Weldability)
- Fabrication and Properties of TiO_2 Photo-Catalytic Coatings by Thermal Spraying with TiO_2-Al Agglomerated Powder(Materials, Metallurgy & Weldability)
- The Formation Behavior of TiO_2 Thermal Sprayed Coatings Using Nano-Powders and Their Photo-Catalytic Properties(Materials, Metallurgy & Weldability, INTERNATIONAL SYMPOSIUM OF JWRI 30TH ANNIVERSARY)
- Effect of Agglomerated TiO_2 Powders with Nanostructure on Microstructure of Thermal Sprayed TiO_2 coatings(Materials, Metallurgy & Weldability)
- Characterization of Graded Ti Silicide Coating Formed by Thermal Diffusion Treatment of Low Pressure Plasma Sprayed Silicon Coating on Titanium Substrate(Materials, Metallurgy & Weldability)
- Studies on Vacuum Brazing (Report III) : Effect of manganese added in sliver-copper brazing alloy on brazability(Welding Physics, Process & Instrument)
- Al_2O_3 Diffusion Bonding Using TiH_2 Powder Interlayer(Materials, Metallurgy & Weldability)
- Reaction Spray by Laser-Plasma Jet : Synthesis of TiN Coatings(Physics, Process, Instruments & Measurements)
- Photocatalytic Activity and Photo-absorption of Plasma Sprayed TiO_2-10%Fe_3O_4 Coatings(Materials, Metallurgy & Weldability)
- Fabrication of TiO_2 Photocatalytic Coatings on PET by Plasma Spraying(Materials, Metallurgy & Weldability, INTERNATIONAL SYMPOSIUM OF JWRI 30TH ANNIVERSARY)
- Zu den Faktoren Welche die Adhasion Lichtbogengespritzter Schichten Beeinflussen(Welding Physics, Process & Instrument)
- Fusing of Sprayed Ni-base Coatings by Induction Heating(Physics, Process, Instruments & Measurements)
- Phase Composition and Photocatalytic Activity of TiO_2-Fe_3O_4 Coatings Prepared by Plasma Spraying Technique(Materials, Metallurgy & Weldability, INTERNATIONAL SYMPOSIUM OF JWRI 30TH ANNIVERSARY)
- Evaluation of Composite TiO_2-FeTiO_3 Coatings Prepared by Plasma Spraying Technique(Materials, Metallurgy & Weldability)