XPS and Electrochemical Studies of Effects of Metalloid Additives on Corrosion Behaviors of Amorphous Iron-Chromium Alloys
スポンサーリンク
概要
- 論文の詳細を見る
XPS and electrochemical methods have been used to investigate the influences of metalloid additives, phosphorus, carbon, boron and silicon on corrosion behaviors of amorphous iron-chromium alloys. It was found that phosphorus accelerates active dissolution prior to passivation. This leads to the rapid enrichment of trivalent chromium in the surface film and to the rapid formation of the surface film with a good protective quality. On the contrary, silicon and boron do not facilitate active dissolution and interfere the chromium enrichment in the surface film owing to incorporation of silicate and borate in the surface film.
- 1979-12-05
著者
-
Naka Masaaki
Welding Research Institute Of Osaka University
-
Hashimoto Koji
The Research Institute For Iron Steel And Other Metals
-
Naka M
Osaka University
-
Asami Katsuhiko
The Research Institute For Iron Steel And Other Metals
-
Asami Katsuhiko
The Research Institute For Iron Steel And Other Metals Tohoku University
-
HASHIMOTO Koji
The Research Institute for Iron, Steel and Other Metals
関連論文
- Wetting and Reaction Products Formed at the Interface Between SiC and Cu-Ti Alloys
- High Rate Sputtering of Corrosion-Resistant Alloys(Welding Physics, Processes & Instruments)
- Interfacial Microstructure of Silicon Carbide and Titanium Aluminide Joints Produced by Solid-State Diffusion Bonding
- Solid State Diffusion Bonding of Silicon Nitride Using Vanadium Foils
- Solid State Diffusion Bonding of Silicon Nitride with Vanadium Foils(Materials, Metallurgy & Weldability)
- Interfacial Microstructure of Solid State Diffusion Bonded Silicon Nitride using Niobium Foils(Materials, Metallurgy & Weldability, INTERNATIONAL SYMPOSIUM OF JWRI 30TH ANNIVERSARY)
- Preparation of Amorphous Metallic Powder
- Ultrasonic Brazing of Alumina to Copper Using Zn-Al Filler(Materials, Metallurgy & Weldability)
- Influence of Brazing Condition on Shear Strength of Alumina-Kovar Joint Made with Amorphous Cu_Ti_ Filler Metal
- Corrosion Behavior of Amorphous Fe-Cr-Zr Alloys
- Effect of Chromium Addition on Corrosion Resistance of Amorphous Co-Zr Alloys
- A Surface Study of Amorphous Nickel-Base Alloys Immersed in Liquid Sodium Contaminated with Impurities
- XPS and Electrochemical Studies of Effects of Metalloid Additives on Corrosion Behaviors of Amorphous Iron-Chromium Alloys
- Interfacial Microstructure and Reaction Phases in Si_3N_4/Si_3N_4 Joints Brazed with Cu-Zn-Ti Filler Alloy(Materials, Metallurgy & Weldability, INTERNATIONAL SYMPOSIUM OF JWRI 30TH ANNIVERSARY)
- 408 REACTION SYNTHESIS OF NiAl-TiC COMPOSITES AND IN-SITU JOINING TO Ni_3Al ALLOYS
- High Temperature Reactions of Ti with SiC(Materials, Metallurgy & Weldability)
- Interfacial Structure and Reaction Mechanism of SiC/Nb Joints(Materials, Metallurgy & Weldability)
- Brazing of Si_3N_4 to Metals with Al-Cu Filler Metals(Physics, Process, Instrument & Measurement)
- Brazing of Si_3N_4 to Metals with Al Filler (Report II) : Si_3N_4/Fe, Ni, Cu, Al or SUS304 Joint(Physics, Process, Instrument & Measurement)
- Brazing of Si_3N_4 to Metals with Al Filler (Report I) : Si_3N_4/Si_3N_4 and Si_3N_4/Ti or Nb Joints(Materials, Metallurgy & Weldability)
- Intermediary Layer of Titanium Oxide in Al_2O_3/Cu Joint Using Amorphous Cu-Ti Filler Metals
- Formation of Hercynite (FeAl_2O_4) at Interface of Al_2O_3/Steel Joint
- Effects of Alloying Elements on the Corrosion Behavior of Amorphous Cobalt-Base Alloys
- Effect of Molybdenum on the Corrosion Behavior of Amorphous Fe-Mo-C alloys in 1N HCl
- Thermal Stability of Microstrucuture and Microhardness in Nanostructured Ni-Cr Alloy Foils Prepared by RF Sputtering Method(Materials, Metallurgy & Weldability)
- Interfacial Reaction between Titanium and Silicon Nitride during Solid State Diffusion Bonding(Materials, Metallurgy & Weldability)
- Interface Layer Structure of Solid State Bonded SiC/TiAl Joint(Materials, Metallurgy & Weldability)
- Mechanical Properties of Nanostructured Cr-B Films Produced by RF Sputtering(Materials, Metallurgy & Weldability)
- Synthesis of β-FeSi_2 Utilizing the Combined Process of MA/SPS(Materials, Metallurgy & Weldability)
- INTERFACIAL REACTIONS BETWEEN SILICON BASE CERAMICS AND METALS
- Appiication of Amorphous Cu-Ti Filler Metal to Joining of Silicon Nitride
- Joining of Silicon Nitride Using Amorphous Cu-Ti Filler Metal(Materials, Metallurgy & Weldability)
- Joining of SiC Using Amorphous Ti Base Filler Metal(Materials, Metallurgy & Weldability)
- Joining of Silicon Nitride to Metals or Alloys Using Amorphous Cu-Ti Filler Metal(Materials, Metallurgy & Weldability)
- Non-oxide Ceramics (Si_3N_4, SiC) Joint Made with Amorphous Cu_Ti_ and Ni_Ti_ Filler Metals
- Surface-Activated Amorphous Alloy Fuel Electrodes for Methanol Fuel Cell
- Corrosion Behavior of Amorphous Ni-Ti-P and Ni-Cr-P Alloys
- Effect of Chromium Addition on Corrosion Resistance of Amorphous Fe-B-C and Fe-B-Si Alloys
- High Corrosion Resistance of Chromium-Bearing Amorphous Iron Alloys in Neutral and Acidic Solutions Containing Chloride
- Corroison Resistivity of Amorphous Iron Alloys Containing Chromium
- Effect of Nickel Addition on Corrosion Resistance of Amorphous Iron Base Alloys
- Corrosion Behavior of Amorphous Nickel-Valve Metal Alloys in Boiling Concentrated Nitric and Hydrochloric Acids
- An X Ray Photoelectron Spectroscopic Study of Surface Films on Amorphous Fe-Cr-Mo-P-C Alloys in 6 N HCl at 80℃
- Spontaneously Passivating Amorphous Fe-Cr-Mo-Metalloid Alloys in 6 N HCl at Room Temperature and 80℃
- Electrochemical and XPS Studies on Corrosion Behavior of Amorphous Ni-Cr-P-B alloys(Metallurgy)
- Electrochemical and XPS Studies on Corrosion Behavior of Amorphous Ni-Cr-P-B alloys
- Effect of Manganese on the Corrosion Behavior of Chromium-Bearing Amorphous Metal-Metalloid Alloys
- Thermometric Properties of Commercial Switching Diodes
- Dezincification of Alpha Brass
- Study on the Corrosion Resistivity of Al-Mg Alloys by means of a Potentiostat
- The Surface Structure of Electrodeposited Nickel
- Recent Development of Research on Amorphous Metals
- Relationship between Superlattice Structures and Electrochemical Behaviors of Copper-Gold Alloys
- Effect of the Surface Structure on the Electrochemical Behaviors of Electrodeposited Nickel
- Surface Structure and Chemical Reactivity of Electrodeposited Nickel
- Relation Between the Twin Structure and the Chemical Activity in Electrodeposited Nickel
- On the Electrochemical Behaviors of Copper-Gold Alloys
- CHARACTERISTICS OF CORROSION RESISTANT AMORPHOUS ALLOYS
- CORROSION BEHAVIOR OF AMORPHOUS ALLOYS
- Formation and Thermal Stability of Amorphous Phase in Transition Metal-Phosphorus Binary Alloys
- The Crystallization Kinetics of Glassy Fe_ Ni_ P_