ねじり振動子負荷試験用放射板の設計

概要

論文の詳細を見る
This paper presents a design method of a radiation plate with high load resistance for load testing of the torsional transducers. The calculation method for the torsional load impedance of the radiation plate seen from the transducer is proposed considerung the flexural vibration mode excited in the radiation plate. The theoretical study using this calculation method indicates that the use of the "stripe" flexural vibration mode has advantage over the use of the "lattice" mode in controlling and obtaining a high load resistance. Furthermore, by using a combination of changing the node number of the stripe vibration mode and changing the thickness of the radiation plate, the design of the wide radiation plate which achieves a high load resistance without changing the resonant frequency is attempted. In an experimental study, the measured torsional load resistance of the prototype radiation plate agrees with the calculated one, and the torsional load resistance of 4.7 Nms was achieved with a 223 mm × 50 mm radiation plate where the fifth stripe flexural vubration mode wets excited. Load testing of the torsional transducer with the high torsional load was effectively conducted using the radiation plate designed by the proposed method.