Novel Three-Axis Solid-state Micro Accelerometer with Surrounding Beam Structure
スポンサーリンク
概要
- 論文の詳細を見る
This study presents the design, fabrication and characterization of an ultra miniaturized 3-axis accelerometer based on micro/nanoelectromechanical systems (MEMS/NEMS). This accelerometer designed and fabricated as small as with overall dimensions 700μmX700μmX550μm length width and thickness, respectively. It can detect three components of acceleration simultaneously.. The sensitivity could be enhanced significantly while miniaturizing the die size of sensor chip with the aid of novel structure and nano-scale piezoresistors on the sensing beams. Therefore, this novel proposed sensor is showing good performance and smaller than other comparable miniaturized sensor structures reported thus far. The accelerometer is capable of measuring accelerations up to ±50g in the frequency bandwidth of 300Hz accordance with finite element simulation.
- 2010-06-01
著者
-
SUGIYAMA Susumu
Ritsumeikan University
-
DAO Dzung
Ritsumeikan University, Biwako-Kusatsu Campus Noji Higashi
-
AMARASINGHE Ranjith
Ritsumeikan University
-
Dao Dzung
Ritsumeikan University
-
Dao Dzung
Center For Promotion Of 21 Century Coe Program Ritsumeikan Univ.
-
Sugiyama Susumu
Faculty Of Science And Egineering Ritsumeikan University
-
Sugiyama Susumu
Department Of Microsystems Technology Ritsumeikan University
-
Sugiyama Susumu
Ritsumeikan Global Innovation Research Organization, Ritsumeikan University, Kusatsu, Shiga 525-8577, Japan
関連論文
- Novel Three-Axis Solid-state Micro Accelerometer with Surrounding Beam Structure
- A Micromachined Thermal Flow Sensor Applied to A PC Mouse Device
- Design and Simulation of a Novel 3-DOF MEMS Convective Gyroscope
- Novel Three-Axis Solid-state Micro Accelerometer with Surrounding Beam Structure
- Fabrication and Characterization of Smooth Si Mold for Hot Embossing Process
- Development of a Flexible Thermopile Power Generator Utilizing BiTe-Cu Thin Films
- Three-Dimensional Micromachining of PTFE Using Synchrotron Radiation Light
- Fabrication of Sub-Micron Structures with High Aspect Ratio for Practical MEMS (特集:立体的微細加工)
- Design and Fabrication of Polymer Electrostatic Comb-Drive Actuators for Micro Conveyer Systems
- 特集論文 Inelastic Constitutive Relationship of Electroplated Nickel Films at Elevated Temperatures for Design of Micro Connector (特集:MEMS/NEMS材料特性および信頼性評価)
- Developing a Wearable System with MEMS Accelerometer for Real-Time Activity Monitoring
- A Point Mass Circular Movement Gyroscope
- Development of a 3-DOF Micro Accelerometer with Wireless Readout
- Optimization of PZT Diaphragm Pump for the Convective Gyroscope
- A Dual Axis Accelerometer Utilizing Low Doped Silicon Thermistor
- Fabrication of Diaphragm Actuator using Bulk PZT
- Development, Strength and Functional Evaluation of Plastic Microneedle Array Fabricated by Injection Molding
- Development of Plastic Injection Molding Using the LIGA Process
- Micro Connector for High Packaging Density Fabricated by Using UV Thick Photoresist
- Fabrication and Characterization of 3-DOF Soft-Contact Tactile Sensor Utilizing 3-DOF Micro Force Moment Sensor
- Piezoresistive Force Sensor Utilizing Combination of Three-Axis Stress Components
- Mirror Deformation by Piezoelectric Actuators
- Characteristics of Polycrystalline Si Nano Wire Piezoresistors
- Design of Micro Multi-Axis Force-Moment Sensor
- Self-standing Polysilicon-metal Thermopile for Micro Power Generator
- A Study on the Sub-Micron LIGA Process
- Simulation for Submicron 3D-Structures based on Plane-pattern to the Cross-section Transfer (PCT) Technique
- X-ray Mask with SiC Membrane for LIGA Process
- Shape Prediction of 3-D Microstructures Fabricated by PCT Technique and Synchrotron Radiation Lithography
- Development and Characterization of a Small Ring-Shaped Ultrasonic Probe for Biopsies
- Electrochemical Selective Detection of Uric Acid Using a Copper-modified Carbon Electrode
- Nanostrain Sensing Based on Piezo-Optic Property of a Photonic Crystal Cavity
- Shape-prediction of 3D PTFE Microstructures Fabricated by Synchrotron Radiation Ablation
- Nanostrain Sensing Based on Piezo-Optic Property of a Photonic Crystal Cavity
- First-Principles Simulation on Piezoresistivity in Alpha and Beta Silicon Carbide Nanosheets
- First-Principles Simulation on Orientation Dependence of Piezoresistance Properties in Silicon Nanowires
- Fabrication and Basic Characterization of a Piezoelectric Valveless Micro Jet Pump
- Bonding of Lead Zirconate Titanate Ceramics to Si Single Crystals for Microdevices
- Fabrication of Microdevices Using Bulk Ceramics of Lead Zirconate Titanate
- First-Principles Simulation on Thickness Dependence of Piezoresistance Effect in Silicon Nanosheets