Prediction of Surface Temperature on Metal Beads Subjected to Argon-Hydrogen Transferred Arc Plasma Impingement
スポンサーリンク
概要
- 論文の詳細を見る
- 1997-06-15
著者
-
ISSHIKI Minoru
Institute of Multidisciplinary Research for Advanced Materials, Tohoku University
-
Mimura Kouji
Institute Of Multidisciplinary Research For Advanced Materials Tohoku University
-
Mimura Kouji
Institute For Advanced Materials Processing Tohoku University
-
Isshiki Minoru
Institute For Advanced Materials Processing Tohoku University
-
Isshiki Minoru
Instite For Advanced Materials Processing Tohoku University
-
Nogami Hiroshi
Institute Of Multidisciplinary Research For Advanced Materials Tohoku University
-
Nogami H
Research And Development Division Anelva Corporation
-
Fudolig Agustin
Institute For Advanced Materials Processing Tohoku University
-
YAGI Jun-ichiro
Institute for Advanced Materials Processing, Tohoku University
-
Nogami Hiroshi
Institute For Advanced Materials Processing Tohoku University
-
Yagi Jun-ichiro
Institute For Advanced Materials Processing Tohoku University
-
Fudolig A
Institute For Advanced Materials Processing Tohoku University
-
Mimura Kouji
Instite for Advanced Materials Processing Tohoku University
関連論文
- Thermal and Optical Properties of Yb^-Doped Y_2O_3 Single Crystal Grown by the Micro-Pulling-Down Method
- Growth and Characterization of Yb^-doped (Lu, Y)AlO_3 Fiber Single Crystals Grown by the Micro-Pulling-Down Method
- Effect of Ar/Ar-H_2 Plasma Arc Melting on Cu Purification
- Characteristics of Printed Thin Films Using Indium Tin Oxide (ITO) Ink
- Operating Conditions for Hydriding Combustion Synthesis of Pure Mg_2NiH_4
- Effects of Hydrogen Pressure and Cooling Rate on the Hydriding Combustion Synthesis of Mg_2NiH_4 Studied by Thermogravimetry and X-ray Diffraction
- Influence of Substrate Bias Voltage on the Impurity Concentrations in Hf Films Deposited by Ion Beam Deposition Method
- Interpretation of Dominant Impurities in Cu Films by Secondary Ion Mass Spectrometry and Glow Discharge Mass Spectrometry
- Trace Impurity Analysis in Ta Films Using Glow Discharge Mass Spectrometry : Concentration Change of Impurities by Applying Negative Substrate Bias Voltage
- Agglomeration of Copper Thin Film in Cu/Ta/Si Structure
- Effect of Substrate Bias Voltage on the Thermal Stability of Cu/Ta/Si Structures Deposited by Ion Beam Deposition
- Influence of Substrate Bias Voltage on the Properties of Cu Thin Films by Sputter Type Ion Beam Deposition
- Improvement of Ta Barrier Film Properties in Cu Interconnection by Using a Non-mass Separated Ion Beam Deposition Method
- Cold-model Experiments on Deadman Renewal Rate Due to Sink-Float Motion of Hearth Coke Bed
- Numerical Analysis of Static Holdup of Fine Particles in Blast Furnace
- Numerical Analysis on Blast Furnace Performance under Operation with Top Gas Recycling and Carbon Composite Agglomerates Charging
- Numerical Analysis on Blast Furnace Performance under Operation with Waste Plastics Injection and Top Gas Recycling
- Numerical Analysis on Injection of Hydrogen Bearing Materials into Blast Furnace
- Numerical Analysis on Charging Carbon Composite Agglomerates into Blast Furnace
- Numerical Analysis on Top Gas Recycling in Blast Furnace with Carbon Composite Agglomerates Charging
- Numerical Evaluation on Blast Furnace Performance under Operation with Carbon Composite Agglomerates Charging
- Numerical Analysis on Effects of Charging Carbon Composite Agglomerates on Blast Furnace Operation
- Mathematical Model of Over-micron and Nano-scale Powders Accumulation in a Coke Fixed-Bed Filter
- Numerical Simulation of the Moving Bed Furnace for Iron Scrap Melting
- Numerical Simulation of the Moving Bed Furnace for Iron Scrap Melting
- Three-dimensional Multiphase Mathematical Modeling of the Blast Furnace Based on the Multifluid Model
- Numerical Analysis of Multiple Injection of Pulverized Coal, Prereduced Iron Ore and Flux with Oxygen Enrichment to the Blast Furnace
- Transient Mathematical Model of Blast Furnace Based on Multi-fluid Concept, with Application to High PCI Operation
- Numerical study on natural gas injection to the blast furnace
- Modeling of Elution Curves in Preparative Chromatography Using Anion-Exchange Resin for Cobalt Purification
- Purification of Manganese Chloride with Chelating Resin Containing Iminodiacetate Groups in Ammonium Chloride Solution
- Copper Purification by Anion-Exchange Separation in Chloride Media
- Recovery of Magnetite from Leached Laterite-residue by Magnetic Separation
- Recovery of Nickel from Selectively Reduced Laterite Ore by Sulphuric Acid Leaching
- Lowering of Grinding Energy and Enhancement of Agglomerate Strength by Dehydration of Indonesian Laterite Ore
- Reduction rate of cement bonded laterite briquette with CO-CO_2 gas
- Advanced Processing of Laterite Ore as Raw Material for Ironmaking -Reduction rate of cement-bonded laterite briquette with CO-CO_2 gas-
- Advanced Agglomeration of Laterite Iron Ore Including Combined Water
- Validation of a Blast Furnace Solid Flow Model Using Reliable 3-D Experimental Results
- Sophisticated Multi-phase Multi-flow Modeling of the Blast Furnace
- Thermodynamic Analysis of Thermochemical Recovery of High Temperature Wastes
- Analysis of transient blast furnace behavior by using a 3-D mathematical model
- Three-dimensional blast furnace mathematical modeling based on multi-fluid theory
- SiO_2 Etching Using M=0 Helicon Wave Plasma
- Improvement in Oxidation Resistance of Cu-Al Dilute Alloys by Pre-annealing in H_2 and Ar Atmospheres
- Effect of Floating Zone Refining under Reduced Hydrogen Pressure on Copper Purification
- Oxidation Mechanism of Copper at 623-1073K
- Self-Diffusion along Dislocations in Ultra High Purity Iron
- Numerical Investigation on Effects of Deadman Structure and Powder Properties on Gas and Powder Flows in Lower Part of Blast Furnace
- Computational Investigation of Scrap Charging to the Blast Furnace
- Analysis of Actual Blast Furnace Operations and Evaluation of Static Liquid Holdup Effects by the Four Fluid Model
- Prediction of Blast Furnace Performance with Top Gas Recycling
- A Mathematical Model for Blast Furnace Reaction Analysis Based on the Four Fluid Model
- A Mathematical Model of Four Phase Motion and Heat Transfer in the Blast Furnace
- Blast Furnace Ironmaking System Using Partially Reduced Iron Ore Reduced by an Energy Source with Low Carbon Content
- Instability of Cl-Related Deep Defects in ZnSe
- Effect of Cd Reservoir on the Composition (y) of Cd_Zn_yTe Epilayers Grown by Hot Wall Epitaxy
- Growth and Evaluation of Cd_Zn_yTe Epilayers on (100) GaAs Substrates by Hot Wall Epitaxy
- Growth Kinetics of Hg_Cd_xTe Epilayers by Semiclosed Open-Tube Isothermal Vapor Phase Epitaxy
- Effect of CdTe Layer Thickness on Hg_Cd_xTe Epilayer Growth by Isothermal Vapor Phase Epitaxy Using (100) CdTe/GaAs Substrates and Void Formation at the Interface
- Prediction of Generation Rates in "Reactive Arc Plasma" Ultrafine Powder Production Process
- Numerical Analysis of the Flow Characteristics and Temperature Distribution in Metal Beads Subjected to Transferred Arc Plasma Impingement
- Prediction of Surface Temperature on Metal Beads Subjected to Argon-Hydrogen Transferred Arc Plasma Impingement
- Modeling of the Flow, Temperature and Concentration Fields in an Arc Plasma Reactor with Argon-Nitrogen Atmosphere
- NUMERICAL SIMULATION OF FLOW AND TEMPERATURE DISTRIBUTION IN A TRANSFERRED ARGON ARC PLASMA ENCLOSED IN A CHAMBER
- Optically Detected Cyclotron Resonance in CdTe
- Effect of Dimethyl Ether Synthesis on Methanol- and Iron-making Integrated System
- Direct Conversion of Blast Furnace Gas to Dimethyl Ether over Cu-ZnO-Ga_2O_3/γ-Al_2O_3 Hybrid Catalyst : Optimum Mass Ratio of the Catalyst
- Heat Storage Rate of Magnesium Nickel Hydride
- Hydrogen Reduction of Natural Ilmenite in a Fluidized Bed
- Etching Characteristics by M=0 Helicon Wave Plasma ( Plasma Processing)
- Feasibility of Rotary Cup Atomizer for Slag Granulation
- Surface Segregation of Chromium in a Copper-Chromium Alloy and its Effect on Formation of a Native Oxide Layer
- Surface Layer Formed by Selective Oxidation in High-Purity Copper-Titanium Binary Alloys
- Exergy Analysis of Charcoal Charging Operation of Blast Furnace
- Numerical Analysis of Multi-Smelter for Melting Metal Waste
- FLOW CHARACTERISTICS AND TEMPERATURE DISTRIBUTION OF AN IMPINGING JET CONFINED IN A CHAMBER
- Floating Zone Refining Iron Reduced Pressure with Dynamic Hydrogen Flow
- Development of PCM for Recovering High Temperature Waste Heat and Utilization for Producing Hydrogen by Reforming Reaction of Methane
- Annealing Effect of ZnSe:N/ZnSe Grown by Metalorganic Chemical Vapor Deposition
- Annealing Effect and Floating Zone Refining of Copper under Hydrogen Atmosphere
- Precise Purity-Evaluation of High-Purity Copper by Residual Resistivity Ratio
- A New Method for Cleaning the Surface of Ultra High-Purity Iron by High-Purity Ozone Exposure and UV Irradiation
- Numerical Analysis on Effect of Humidified Blasting on Blast Furnace Operation
- Numerical Inverstigation of Simulaneous Injection of Pulverized Coal and Natural Gas with Oxygen Enrichment to the Blast Furnace
- An unsteady state mathematical model of blast furnace based on multi-fluid concept
- An Application of Bingham Model to Viscous Fluid Modeling of Solid Flow in Moving Bed
- Effect of Solution Loss Reaction on Coke Degradation Rate under Sheer Stress
- Purification of Hafnium by Hydrogen Plasma Arc Melting
- Interpretation of Dominant Impurities in Cu Films by Secondary Ion Mass Spectrometry and Glow Discharge Mass Spectrometry
- Trace Impurity Analysis in Ta Films Using Glow Discharge Mass Spectrometry: Concentration Change of Impurities by Applying Negative Substrate Bias Voltage
- Thermal and Optical Properties of Yb3+-Doped Y2O3 Single Crystal Grown by the Micro-Pulling-Down Method
- Noncontact Laser Modulation Calorimetry for High-Purity Liquid Iron
- Penetration Effect of Injected Gas at Shaft Gas Injection in Blast Furnace Analyzed by Hybrid Model of DEM-CFD
- Numerical Analysis on Behavior of Unburned Char and Fine Coke in Blast Furnace
- Surface Tension of Liquid Iron as Functions of Oxygen Activity and Temperature
- Growth and Characterization of Yb3+-doped (Lu,Y)AlO3 Fiber Single Crystals Grown by the Micro-Pulling-Down Method
- Optically Detected Cyclotron Resonance in CdTe
- Effect of Substrate Bias Voltage on the Thermal Stability of Cu/Ta/Si Structures Deposited by Ion Beam Deposition
- Simulation of Transport Phenomena around the Raceway Zone in the Blast Furnace with and without Pulverized Coal Injection.