Numerical Inverstigation of Simulaneous Injection of Pulverized Coal and Natural Gas with Oxygen Enrichment to the Blast Furnace
スポンサーリンク
概要
- 論文の詳細を見る
The multiple injection of carbonaceous materials and oxygen enrichment in the blast furnace has received especial attention in the recent years due to its possibility of considerably decrease in coke rate and increase of the productivity. This paper introduces a modeling of the co-injection of pulverized coal and natural gas into the blast furnace through the tuyere. This model treats the blast furnace as a multi-phase reactor and five phases are treated simultaneously: gas, lump solids (iron ore, sinter, pellets and coke), pig iron, molten slag and pulverized coal. Conservation equations for mass, momentum, energy and chemical species are solved simultaneously based on the finite volume method. Firstly pulverized coal is simulated and afterwards only natural gas is investigated and compared with the all coke operation. Finally, the combined practice is suggested in order to improve the actual blast furnace operation. The simulation results have contributed to better understanding the blast furnace phenomena with multiple injectants, and supported new improvements in the furnace operation. The results obtained in this investigation have shown the possibility of considerable advances in the actual blast furnace operation such as increase in productivity, lower silicon content in hot metal and decrease of the coke and slag rates. In addition, the total amount of the greenhouses in the off gas is decreased, which contributes to make the blast furnace process cleaner.
- 社団法人 日本鉄鋼協会の論文
- 2002-11-15
著者
-
Nogami Hiroshi
Department of Chemical Engineering, Ichinoseki National College of Technology
-
Nogami Hiroshi
Department Of Chemical Engineering Ichinoseki National College Of Technology
-
Nogami H
Department Of Chemical Engineering Ichinoseki National College Of Technology
-
Nogami Hiroshi
Institute For Advanced Materials Processing Tohoku University
-
Yagi Jun-ichiro
Institute Of Multidisciplinary Research For Advanced Materials Tohoku University
-
Yagi Jun-ichiro
Institute For Advanced Materials Processing Tohoku University
-
Castro Jose
Programa De Pos Graduacao Em Engenharia Metalurgica Universidade Federal Fluminense Eeimvr
-
Yagi Jun-ichiro
Institute of Multidisciplinary Research for Advanced Materials, Tohoku University
関連論文
- Simultaneous Three-dimensional Analysis of Gas–Solid Flow in Blast Furnace by Combining Discrete Element Method and Computational Fluid Dynamics
- Dynamic Analysis of Gas and Solid Flows in Blast Furnace with Shaft Gas Injection by Hybrid Model of DEM-CFD
- Operating Conditions for Hydriding Combustion Synthesis of Pure Mg_2NiH_4
- Effects of Hydrogen Pressure and Cooling Rate on the Hydriding Combustion Synthesis of Mg_2NiH_4 Studied by Thermogravimetry and X-ray Diffraction
- Cold-model Experiments on Deadman Renewal Rate Due to Sink-Float Motion of Hearth Coke Bed
- Numerical Analysis of Static Holdup of Fine Particles in Blast Furnace
- Numerical Analysis on Blast Furnace Performance under Operation with Top Gas Recycling and Carbon Composite Agglomerates Charging
- Numerical Analysis on Blast Furnace Performance under Operation with Waste Plastics Injection and Top Gas Recycling
- Numerical Analysis on Injection of Hydrogen Bearing Materials into Blast Furnace
- Numerical Analysis on Charging Carbon Composite Agglomerates into Blast Furnace
- Numerical Analysis on Top Gas Recycling in Blast Furnace with Carbon Composite Agglomerates Charging
- Numerical Evaluation on Blast Furnace Performance under Operation with Carbon Composite Agglomerates Charging
- Numerical Analysis on Effects of Charging Carbon Composite Agglomerates on Blast Furnace Operation
- Mathematical Model of Over-micron and Nano-scale Powders Accumulation in a Coke Fixed-Bed Filter
- Numerical Simulation of the Moving Bed Furnace for Iron Scrap Melting
- Numerical Simulation of the Moving Bed Furnace for Iron Scrap Melting
- Three-dimensional Multiphase Mathematical Modeling of the Blast Furnace Based on the Multifluid Model
- Numerical Analysis of Multiple Injection of Pulverized Coal, Prereduced Iron Ore and Flux with Oxygen Enrichment to the Blast Furnace
- Transient Mathematical Model of Blast Furnace Based on Multi-fluid Concept, with Application to High PCI Operation
- Numerical study on natural gas injection to the blast furnace
- Transient Mathematical modeling of Blast Furnace based on multi-fluid concept
- Recovery of Magnetite from Leached Laterite-residue by Magnetic Separation
- Recovery of Nickel from Selectively Reduced Laterite Ore by Sulphuric Acid Leaching
- Lowering of Grinding Energy and Enhancement of Agglomerate Strength by Dehydration of Indonesian Laterite Ore
- Reduction rate of cement bonded laterite briquette with CO-CO_2 gas
- Advanced Processing of Laterite Ore as Raw Material for Ironmaking -Reduction rate of cement-bonded laterite briquette with CO-CO_2 gas-
- Advanced Agglomeration of Laterite Iron Ore Including Combined Water
- Validation of a Blast Furnace Solid Flow Model Using Reliable 3-D Experimental Results
- Sophisticated Multi-phase Multi-flow Modeling of the Blast Furnace
- Thermodynamic Analysis of Thermochemical Recovery of High Temperature Wastes
- Analysis of transient blast furnace behavior by using a 3-D mathematical model
- Three-dimensional blast furnace mathematical modeling based on multi-fluid theory
- SiO_2 Etching Using M=0 Helicon Wave Plasma
- Analysis on Material and Energy Balances of Ironmaking Systems on Blast Furnace Operations with Metallic Charging, Top Gas Recycling and Natural Gas Injection
- Numerical Investigation on Effects of Deadman Structure and Powder Properties on Gas and Powder Flows in Lower Part of Blast Furnace
- Computational Investigation of Scrap Charging to the Blast Furnace
- Analysis of Actual Blast Furnace Operations and Evaluation of Static Liquid Holdup Effects by the Four Fluid Model
- Prediction of Blast Furnace Performance with Top Gas Recycling
- A Mathematical Model for Blast Furnace Reaction Analysis Based on the Four Fluid Model
- A Mathematical Model of Four Phase Motion and Heat Transfer in the Blast Furnace
- Blast Furnace Ironmaking System Using Partially Reduced Iron Ore Reduced by an Energy Source with Low Carbon Content
- Effect of Bottom Bubbling Conditions on Surface Reaction Rate in Oxygen-Water System
- Behavior of Cobalt in Iron- and Steel-making Processes
- Prediction of Generation Rates in "Reactive Arc Plasma" Ultrafine Powder Production Process
- Numerical Analysis of the Flow Characteristics and Temperature Distribution in Metal Beads Subjected to Transferred Arc Plasma Impingement
- Prediction of Surface Temperature on Metal Beads Subjected to Argon-Hydrogen Transferred Arc Plasma Impingement
- Modeling of the Flow, Temperature and Concentration Fields in an Arc Plasma Reactor with Argon-Nitrogen Atmosphere
- NUMERICAL SIMULATION OF FLOW AND TEMPERATURE DISTRIBUTION IN A TRANSFERRED ARGON ARC PLASMA ENCLOSED IN A CHAMBER
- Effect of Dimethyl Ether Synthesis on Methanol- and Iron-making Integrated System
- Direct Conversion of Blast Furnace Gas to Dimethyl Ether over Cu-ZnO-Ga_2O_3/γ-Al_2O_3 Hybrid Catalyst : Optimum Mass Ratio of the Catalyst
- Heat Storage Rate of Magnesium Nickel Hydride
- Hydrogen Reduction of Natural Ilmenite in a Fluidized Bed
- Etching Characteristics by M=0 Helicon Wave Plasma ( Plasma Processing)
- Feasibility of Rotary Cup Atomizer for Slag Granulation
- Exergy Analysis of Charcoal Charging Operation of Blast Furnace
- Numerical Analysis of Multi-Smelter for Melting Metal Waste
- Histological Analysis of Triphalangism Associated with Polydactyly of the Thumb
- FLOW CHARACTERISTICS AND TEMPERATURE DISTRIBUTION OF AN IMPINGING JET CONFINED IN A CHAMBER
- Influences of Physical Properties of Particle in Discrete Element Method on Descending Phenomena and Stress Distribution in Blast Furnace
- Recent Progress and Future Perspective on Mathematical Modeling of Blast Furnace
- Development of PCM for Recovering High Temperature Waste Heat and Utilization for Producing Hydrogen by Reforming Reaction of Methane
- Chondrodysplasia Punctata with Myopathic Involvement
- Dynamic Analysis of Gas and Solid Flows in Blast Furnace with Shaft Gas Injection by Hybrid Model of DEM-CFD
- Numerical Analysis on Effect of Humidified Blasting on Blast Furnace Operation
- Simultaneous Three-dimensional Analysis of Gas-Solid Flow in Blast Furnace by Combining Discrete Element Method and Computational Fluid Dynamics
- Numerical Inverstigation of Simulaneous Injection of Pulverized Coal and Natural Gas with Oxygen Enrichment to the Blast Furnace
- An unsteady state mathematical model of blast furnace based on multi-fluid concept
- Effects of Slag Compositions on the Rate of Methane-Steam Reaction
- Observation of Molten Slag Surface under Gas Impingement by X-ray Computed Tomography
- Theoretical Design of Cup Atomizer for Heat Recovery of Molten Slag by Chemical Quench
- Effect of Slag Basicity on the Rate of Methane-steam Reaction
- An Application of Bingham Model to Viscous Fluid Modeling of Solid Flow in Moving Bed
- Investigation of the size degradation and powders accumulation within the Blast furnace by using a multi-phase model
- Effect of Solution Loss Reaction on Coke Degradation Rate under Sheer Stress
- Methodology to Evaluate Reduction Limit of Carbon Dioxide Emission and Minimum Exergy Consumption for Ironmaking
- Penetration Effect of Injected Gas at Shaft Gas Injection in Blast Furnace Analyzed by Hybrid Model of DEM-CFD
- Numerical Analysis on Behavior of Unburned Char and Fine Coke in Blast Furnace
- Measurement and Modeling of Thermal Conductivity for Dense Iron Oxide and Porous Iron Ore Aggliomerates in Stepwise Reduction.
- Kinetics of the Oxidation and Reduction of Synthetic Ilmenite.
- Simulation of Transport Phenomena around the Raceway Zone in the Blast Furnace with and without Pulverized Coal Injection.
- Bahavior of- Powders in a Packed Bed with Lateral Inlets.
- Modeling of Solid Flow in Moving Beds.
- Measurements of Heat Transfer Coefficients between Gas and Particles for a Single Sphere and for Moving Beds.
- Recent Progress on Advanced Blast Furnace Mathematical Models Based on Discrete Method