Noncontact Laser Modulation Calorimetry for High-Purity Liquid Iron
スポンサーリンク
概要
著者
-
Isshiki Minoru
Instite For Advanced Materials Processing Tohoku University
-
Tsukada Takao
Department Of Chemical Engineering Tohoku University
-
Kobatake Hidekazu
Institute Of Multidisciplinary Research For Advanced Materials Tohoku University
-
Sugioka Ken-ichi
Department Of Chemical Engineering Tohoku University
-
Sugie Kazutoshi
Institute Of Multidisciplinary Research For Advanced Materials Tohoku University
-
Uchikoshi Masahito
Institute Of Multidisciplinary Research For Advanced Material (imram) Tohoku University
-
Fukuyama Hiroyuki
Institute for Multidisciplinary Research for Advanced Materials (IMRAM), Tohoku University, Sendai 980-8577, Japan
関連論文
- Effect of Ar/Ar-H_2 Plasma Arc Melting on Cu Purification
- Characteristics of Printed Thin Films Using Indium Tin Oxide (ITO) Ink
- Influence of Substrate Bias Voltage on the Impurity Concentrations in Hf Films Deposited by Ion Beam Deposition Method
- Agglomeration of Copper Thin Film in Cu/Ta/Si Structure
- Influence of Substrate Bias Voltage on the Properties of Cu Thin Films by Sputter Type Ion Beam Deposition
- Improvement of Ta Barrier Film Properties in Cu Interconnection by Using a Non-mass Separated Ion Beam Deposition Method
- Modeling of Elution Curves in Preparative Chromatography Using Anion-Exchange Resin for Cobalt Purification
- Purification of Manganese Chloride with Chelating Resin Containing Iminodiacetate Groups in Ammonium Chloride Solution
- Copper Purification by Anion-Exchange Separation in Chloride Media
- Improvement in Oxidation Resistance of Cu-Al Dilute Alloys by Pre-annealing in H_2 and Ar Atmospheres
- Effect of Floating Zone Refining under Reduced Hydrogen Pressure on Copper Purification
- Oxidation Mechanism of Copper at 623-1073K
- Self-Diffusion along Dislocations in Ultra High Purity Iron
- Effect of NaF Addition to Mold Flux on Cuspidine Primary Field
- Noncontact Modulated Laser Calorimetry for Liquid Austenitic Stainless Steel in dc Magnetic Field
- Instability of Cl-Related Deep Defects in ZnSe
- Effect of Cd Reservoir on the Composition (y) of Cd_Zn_yTe Epilayers Grown by Hot Wall Epitaxy
- Growth and Evaluation of Cd_Zn_yTe Epilayers on (100) GaAs Substrates by Hot Wall Epitaxy
- Growth Kinetics of Hg_Cd_xTe Epilayers by Semiclosed Open-Tube Isothermal Vapor Phase Epitaxy
- Effect of CdTe Layer Thickness on Hg_Cd_xTe Epilayer Growth by Isothermal Vapor Phase Epitaxy Using (100) CdTe/GaAs Substrates and Void Formation at the Interface
- Prediction of Surface Temperature on Metal Beads Subjected to Argon-Hydrogen Transferred Arc Plasma Impingement
- Optically Detected Cyclotron Resonance in CdTe
- Noncontact Measurements of Heat Capacity, Thermal Conductivity and Emissivity of High Temperature Melts by Modulated Laser Calorimetry
- Surface Segregation of Chromium in a Copper-Chromium Alloy and its Effect on Formation of a Native Oxide Layer
- Surface Layer Formed by Selective Oxidation in High-Purity Copper-Titanium Binary Alloys
- Effect of Mechanical Milling on Carbothermic Reduction of Magnesia
- Characteristics of AlN Films Grown on Thermally-Nitrided Sapphire Substrates
- Floating Zone Refining Iron Reduced Pressure with Dynamic Hydrogen Flow
- Critical cooling rates for glass formation in levitated Mg_2SiO_4-MgSiO_3 chondrule melts
- GLOBAL ANALYSIS OF HEAT TRANSFER IN CZ CRYSTAL GROWTH OF OXIDE
- Thermodynamics of Mold Powder around Cuspidine
- Annealing Effect of ZnSe:N/ZnSe Grown by Metalorganic Chemical Vapor Deposition
- THEORETICAL AND EXPERIMENTAL STUDIES OF CIRCULATIONS INSIDE AND OUTSIDE A DEFORMED DROP UNDER A UNIFORM ELECTRIC FIELD
- Annealing Effect and Floating Zone Refining of Copper under Hydrogen Atmosphere
- Precise Purity-Evaluation of High-Purity Copper by Residual Resistivity Ratio
- A New Method for Cleaning the Surface of Ultra High-Purity Iron by High-Purity Ozone Exposure and UV Irradiation
- Relationship between Applied Static Magnetic Field Strength and Thermal Conductivity Values of Molten Materials Measured Using an EML Technique
- Purification of Hafnium by Hydrogen Plasma Arc Melting
- Relationship between Applied Static Magnetic Field Strength and Thermal Conductivity Values of Molten Materials Measured Using the EML Technique
- Interpretation of Dominant Impurities in Cu Films by Secondary Ion Mass Spectrometry and Glow Discharge Mass Spectrometry
- Trace Impurity Analysis in Ta Films Using Glow Discharge Mass Spectrometry: Concentration Change of Impurities by Applying Negative Substrate Bias Voltage
- Thermal and Optical Properties of Yb3+-Doped Y2O3 Single Crystal Grown by the Micro-Pulling-Down Method
- Noncontact Laser Modulation Calorimetry for High-Purity Liquid Iron
- Surface Tension of Liquid Iron as Functions of Oxygen Activity and Temperature
- Analysis of the Dislocation and Polarity in an AlN Layer Grown Using Ga--Al Flux
- Elimination of Rotational Domain in AlN Layers Grown from Ga-Al Flux and Effects of Growth Temperature on the Layers
- Errata: Critical cooling rates for glass formation in levitated Mg2SiO4-MgSiO3 chondrule melts
- Growth and Characterization of Yb3+-doped (Lu,Y)AlO3 Fiber Single Crystals Grown by the Micro-Pulling-Down Method
- Analysis of the Dislocation and Polarity in an AlN Layer Grown Using Ga-Al Flux
- Relationship of Surface Tension, Oxygen Partial Pressure, and Temperature for Molten Iron
- Optically Detected Cyclotron Resonance in CdTe
- Effect of Substrate Bias Voltage on the Thermal Stability of Cu/Ta/Si Structures Deposited by Ion Beam Deposition