Fabrication of High-Performance Thin-Film Transistors on Glass Substrate by Atmospheric Pressure Micro-Thermal-Plasma-Jet-Induced Lateral Crystallization Technique

概要

論文の詳細を見る
Amorphous silicon (a-Si) films deposited by plasma-enhanced chemical vapor deposition (PECVD) were patterned to strips with a width ranging from 1 to 50 μm, and irradiated with an atmospheric pressure micro-thermal-plasma-jet (μ-TPJ) to induce high-speed lateral crystallization (HSLC). From electron backscattering diffraction patterns (EBSPs), the growth of {\sim}20-μm-long single grains was observed in a narrow line of 1 μm width under a μ-TPJ scan speed as high as 4000 mm/s. TFTs with a large channel length (L)/width (W) of 40 μm/50 μm show a field-effect mobility (\mu_{\text{FE}}) of 284 cm2 V-1 s-1, whereas decreasing W monotonically increased \mu_{\text{FE}} to 477 cm2 V-1 s-1 at W = 2 μm. By applying μ-TPJ to strip a-Si films, we can form single-crystalline Si at predetermined positions and obtain TFTs with reasonably high performance. We confirmed that HSLC is applicable to a-Si films on conventional glass substrates without crack generation by either inserting a buffer layer underneath a-Si films, or heating the samples during μ-TPJ irradiation. A new positioning method using a Si slit mask is also demonstrated. TFTs fabricated on glass with a buffer layer inserted underneath the a-Si films show a high \mu_{\text{FE}} of 267 cm2 V-1 s-1.
2012-02-25