Crystallization of Amorphous GdFe_2H_x Alloys Prepared by Hydrogen Absorption
スポンサーリンク
概要
- 論文の詳細を見る
Amorphous a-GdFe_2H_x alloys were prepared by two kinds of technique, i.e., the newly developed hydrogen-induced amorphization (HIA) of the Laves phase c-GdFe_2 and hyrogenation of the rapidly quenched amorphous a-Gd_<33>Fe_<67> alloy. The formation of a GdFe_2H_x by hydrogen absorption was found to occur between 473 K and 573 K where the decomposition of c-GdFe_2 into the elemental hydride GdH_2 and α-Fe is suppressed. On the other hand, the rapidly quenched a-Gd_<33>Fe_<66> alloy could absorb hydrogen in the amorphous state below 523 K. The crystallization behavior of the hydrogen-induced amorphous a-GdFe_2H_<3.6> alloy was similar to that of the hydrogenated amorphous a-Gd_<33>Fe_<67>H_<120> alloy. That is, the DSC curves of the a-GdFe_2H_x alloys showed a broad endothermic peak resulting partial desorption of hydrogen together with two exothermic peaks. The first exothermic peak was associated with the crystallization of the amorphous phase into GdH_2 and α-Fe, and the second one was attributed to the growth of them. On the other hand, a-Gd_<33>Fe_<67> crystallized polymorphously to the Laves phase c-GdFe_2 showing an exothermic peak.
- 東北大学の論文
- 1989-03-20
著者
-
Yanagitani Akihiko
Institute For Materials Research
-
Aoki Kiyoshi
Institute For Materials Research
-
Masumoto Tsuyoshi
Institute For Materials Research
関連論文
- High Mechanical Strength of Al-(V, Cr, Mn)-(Fe, Co, Ni)Quasicrystalline Alloys Prepared by Rapid Solidification
- Faceted Etch Pits Formed on Surfaces of an Icosahedral Al_Pd_Mn_ Quasicrystal
- New Class of Amorphous and Icosahedral Phases in Zn-Mg-Rare-Earth Metal Alloys
- Magnetic Properties and Phase Stability of Icosahedral Al-Pd-Mn-B Quasicrystals
- Formation of Nanocrystalline Structures by Crystallization of Amorphous Fe-M-B (M=IVa to VIa Group Metal) Alloys
- Novel Face-Centered Icosahedral Phase in Al-Mg-Li System
- Mechanical Behavior of Amorphous Alloys at Elevated Temperatures
- Electron Microscope Study of Decagonal Quasicrystals of Al_Ni_Fe_
- Temperature Dependence of Hardness and Expansion in an Icosahedral Al-Pd-Mn Alloy
- Crystallization-Induced Phason Relaxation in Icosahedral Al-Pd-Mn Alloys
- New Amorphous Alloys with Good Ductility in Al-Ce-M (M=Nb, Fe, Co, Ni or Cu) Systems : Condensed Matter
- Fatigue Strength of Amorphous Alloy Wires
- Layered Structure and Superconducting Properties of Ag-Sheathed Bi_Pb_Sr_2Ca_2Cu_3O_y Wires Prepared by Combined Jellyroll and Hotextrusion Technique
- Formation of Glassy Pd-Ni-P Alloys by Mechanical Alloying and Their Structure and Thermal Stability
- Mossbauer Effect of Decagonal and Amorphous Phases in Al-Ni-Fe System
- Effect of Additional Cu Element on Structure and Crystallization Behavior of Amorphous Fe-Nb-Si-B Alloys
- Phason Strains and Periodicity in Al-Ru-Cu Icosahedral Quasicrystals
- Electron Channelling Effect in an Al-Fe-Cu Quasicrystal
- Magnetic Properties of Fe-Based Binary Crystalline Alloys Produced by Vapor Quenching
- Highly Ordered Icosahedral Quasicrystal of Al-Cu-Fe Alloy Studied by Electron Diffraction and High-Resolution Electron Microscopy : Condensed Matter
- Electrical Resistance and Magnetoresistance in Quasi-Crystalline and Amorphous Al-Mn Alloys
- Magnetic Properties of Al-Si-MTM ( Magnetic Transition Metal) Melt Quenched Amorphous Ribbons
- Amorphization by Compound-Element Milling in Al- TM(TM=Mn, Fe, Co and Ni) Binary System
- Formation, Thermal Stability and Mossbauer Effect of Amorphous, Quasicrystalline and Crystalline Phases in Al-(Cu, Ni)-Fe Systems
- Production of Amorphous Alloy Balloons by Utilizing Viscous Flowability
- Space Group Determination of Decagonal Quasicrystals of an Al_Ni_Fe_ Alloy Using Convergent-Beam Electron Diffraction
- Interface Stability, Growth and Morphology in Icosahedral Quasi Crystals
- Quasicrystals As a Hume-Rothery Phase : An Empirical Approach((B)Quasicrystals)
- Quasicrystals in Al-Pd-TM (TM=Transition Metal) Systems Prepared by Rapid Solidification
- Al-Ge-Mn and Al-Cu-Ge-Mn Quasi-Crystals with Coercivity at Room Temperature : Condensed Matter
- New Stable Icosahedral Al-Cu-Ru and Al-Cu-Os Alloys : Condensed Matter
- Glass Transition Behavior of Al-Y-Ni and Al-Ce-Ni Amorphous Alloys : Condensed Matter
- Mossbauer Effect of Icosahedral, Amorphous, and Crystalline Al-Cu-Fe Alloys : Magnetism, Magnetic Materials and Devices
- Production of Bi-Sr-Ca-Cu-O Glasses by Liquid Quenching and their Glass Transition and Structural Relaxation : Condensed Matter
- Anelastic Relaxations of La-based Amorphous Alloys
- Direct Solder Bump Formation Technique on Al Pad and Its High Reliability
- High-Strain-Rate Superplasticity due to Newtonian Viscous Flow in La_Al_Ni_ Metallic Glass
- Stress Overshoot in Stress-Strain Curves of Zr_Al_Ni_Cu_ Metallic Glass
- Molecular Dynamics Study of Structural and Dynamical Properties of Zr_xNi_ (x=0〜100) Amorphous and Liquid Alloys
- Molecular Dynamics Simulation of Phase Separation in Lennard-Jones Liquids
- Molecular Dynamics Study for Structure and Dynamics of Amorphous and Liquid Zr_Ni_ Alloys
- Upper Critical Fields on High Temperature Superconductivity in La-Sr-Cu-O System
- Nanocrystalline Soft-Magnetic Fe-Zr-B-Cu Composites by Consolidation of Amorphous Powders Coated with Oxide Film through Sol-Gel Process
- Soft Magnetic Properties of Bulk Nanocrystalline Fe-(Zr, Hf)-B Alloys Produced by Extruding Amorphous Powders
- Soft-Magnetic Properties of Nanocrystalline Fe-Zr-B-Ni Bulk Alloy Produced by Warm Extrusion
- Mechanical Properties of Nanocrystalline Powder Metallurgy Aluminum Alloys in Glass Forming Al-Ni-Ce-TM (TM : Transition Metal) Systems
- Nanocrystalline Soft-Magnetic Cores Produced by Consolidation of Fe_Zr_7B_6Cu_1 Amorphous Powder
- Thermal, Mechanical and Physical Properties of Supercooled Liquid in Pd-Cu-Ni-P Amorphous Alloy
- High T_c Superconductivity of a Melt-Spun Er_1Ba_2Cu_3 Oxide Ribbon
- Hydrogenation of Amorphous and Crystalline Gd-Co Alloys
- Crystallization Behavior of Amorphous Fe-Tb-M (M=Si or Al) Alloys and High Magnetostriction of their Crystallized Phases
- Study on the Production of Flaky Amorphous Alloy Powders by Impact Flattening of Atomized Liquid Droplets on a Rapidly Rotating Wheel
- Formation of Ultra-fine Amorphous Powders in (Fe, Co, Ni)-B Systems by Chemical Reduction Method and Their Thermal and Magnetic Properties
- Production of Thick Sheets of an Amorphous Fe_P_C_ Alloy by Incremental Solidification Method
- Amorphous Alloys with Nitride Particles Produced by a Nitrogen Plasma-Alloy Reaction : Condensed Matter
- Relaxation Processes of Two Glass Transitions for a Zr_Al_Ni_ Amorphous Alloy
- Structural Relaxation of a La_Al_Ni_ Amorphous Alloy Measured by an Internal Friction Method
- New Icosahedral and Amorphous Phases in Mg-Al-Ag System Prepared by Liquid Quenching : Condensed Matter
- New Amorphous Al-Ln (Ln=Pr, Nd, Sm or Gd) Alloys Prepared by Melt Spinning : Condensed Matter
- Pressure Dependence of Hydrogen-Induced Amorphization in C15 Laves Phases TbM_2 (M=Fe, Co and Ni)
- Amorphization of D0_ Intermetallics by Hydrogenation
- Formation and Crystallization of Hydrogen-Induced Amorphous Ti_3InH_ Alloy
- Differential Scanning Calorimetric Study of Solid State Amorphization and Crystallization in Zr/Co and Zr/Ni Multilayers
- Thermal Stability and Hydrogen Desorption Behavior of Hydrogen-Induced Amorphous Alloys
- Pressure Dependence of Hydrogen-Induced Amorphization in C15 Laves Compound ErFe_2((A)Amorphous Alloys)
- Hydrogen-Induced Amorphization in Zr_3Al Compound with L1_2 Structure
- Hydrogen-Induced Amorphization of Nd_3Ga and Sm_3Ga Compounds with D0_ Structure
- High T_c Superconductor Prepared by Oxidization of a Liquid-Quenched Yb_1Ba_2Cu_3 Alloy Foil in Air
- Influence of Hydrogenation on the Magnetic Properties of Gd-Co Amorphous Alloys
- Hydrogenation of Amorphous and Crystalline RE-Ni Alloys
- Thermal, Magnetic and Electrical Properties of Mn-Metalloid Amorphous Ribbons
- Formation of a Nanoscale hcp Structure by Crystallization of an Amorphous Co_Zr_7B_2 Alloy
- Relaxation, Crystallization and Consolidation of an Amorphous Pd_Ni_P_ Alloy Powder
- Microstructure and Soft Magnetic Properties of Nanocrystalline Fe-Zr-B-Al, Fe-Zr-B-Si and Fe-Zr-B-Al-Si Alloys with Zero Magnetostriction
- Recent Progress of Aluminum Base Amorphous Alloys
- New Amorphous Mg-Ce-Ni Alloys with High Strength and Good Ductility : Condensed Matter
- New Amorphous Al-Y, Al-La and Al-Ce Alloys Prepared by Melt Spinning : Condensed Matter
- Aluminum-Based Amorphous Alloys with Tensile Strength above 980 MPa (100 kg / mm^2) : Condensed Matter
- New Amorphous Alloys with Good Ductility in Al-Y-M and Al-La-M (M = Fe, Co, Ni or Cu) Systems : Condensed Matter
- Heat Capacity of Pd-Si, Ni-Si-B and Zr-Based Metallic Glasses
- Surface Characterization of Sputter-Deposited Cu-Ta Alloys by Auger Electron Spectroscopy
- Soft Magnetic Properties of bcc Fe-M-B-Cu (M=Ti, Nb or Ta) Alloys with Nanoscale Grain Size
- Superconductivity above 90 K in Y-Ba-Cu-O Compounds and Their Critical Current Densities at 77 K
- Production of Al-based Amorphous Alloys by a Metallic Mold Casting Method and their Thermal Stability
- Oriented Structure and Supereonducting Properties in Dense Y_1Ba_2Cu_3 Oxides Prepared by Press Forging
- Synthesis of Amorphous Al-based Alloy Powders by Mechanical Alloying and Mechanical Disordering
- Crystallization of Amorphous GdFe_2H_x Alloys Prepared by Hydrogen Absorption
- Hydrogen Induced Amorphization of Intermetallic Compounds RAl
- Nitrogen-Induced Amorphization of BCC Type Solid Solution Alloys by Mechanical Alloying
- Hydrogen-Induced Amorphization in Intermetallic Compounds
- Formation and High Mechanical Strength of Al-Based Alloys Containing a Nanoscale Icosahedral Phase As a Main Constituent
- Formation and Mechanical Strengths of Aluminum-based Supersaturated Solid Solutions((A)Amorphous Alloys)
- Amorphous Ultrafine Metallic Particles
- Preparation of Superconducting (Bi, Pb)-Sr-Ca-Cu Oxide Tapes with a Highly Oriented Structure by the Solidification Method
- Superconductors Prepared by Mechanical Alloying of Immiscible Elements
- High-T_c Superconductor Prepared by Oxidation of a Mechanically Alloyed Nonequilibrium fcc Ba_2YCu_3 Phase : Electrical Properties of Condensed Matter
- High-T_c Superconductor Produced by Oxidization of Melt-Spun Ag-Ho-Ba-Cu Alloy Ribbon : Electrical Properties of Condensed Matter
- High-T_c Superconductor Prepared by Oxidization of a Melt-Spun Eu_1Ba_2Cu_3 Alloy Ribbon
- Calorimetric and Morphological Studies of Mechanically Alloyed and Mechanically Disordered Al-50at% Transition Metal Alloy Powders (金属間化合物の粉末冶金プロセスと特性)
- Morphological and Structural Evolutions of TaAl Alloy Powders during Solid State Amorphization Processes (アモルファス粉末・成形材料)