Emission Spectrographic Analysis of Metal Solid Samples with Plasma Jet Flame. I. : Application of Nitrogen Plasma Flame
スポンサーリンク
概要
- 論文の詳細を見る
A small plasma jet burner for direct excitation of metal solid samples was developed. The optimum operating conditions are as follows ; d.c. arc current about 15 A, flow rate of nitrogen tangentially introduced gas about 1.5-2 l/min, and that of atomizer gas about 3.5-4 l/min. The limit of detection of some elements were determined with solution samples. Satisfactory calibration curves were also obtained for analyses of alloying elements in some solid form alloys.
- 東北大学の論文
著者
-
Goto Hidehiro
The Research Institute For Iron Steel And Other Metal S
-
HIROKAWA Kichinosuke
The Research Institute for Iron, Steel and Other Metals
-
Hirokawa Kichinosuke
The Research Institute For Iron Steel And Other Metals
-
Goto Hidehiro
The Research Institute For Iron Steel And Other Metal
関連論文
- Determination of Oxygen in Metals by Argon Carrier-Fusion Coulometric Titration Method
- Determination of Oxygen in Metallic Manganese by Argon-Carrier Fusion Method
- Determination of Oxygen in Cast Iron
- Studies on Gas Analysis in Metallic Titanium
- Flame Spectrophotometric Determination of Calcium in Cast Iron
- Studies on Flame Photometry by Organic Solvent Extraction Method. II : Flame Photometric Determination of Calcium by Extraction with Methyl Isobutyl Ketone
- Spectrographic Determination of Impurity Calcium in Thorium and Thorium Dioxide with the Transient Discharge Source Unit
- Separation and Determination of Rare Earth Elements in Iron and Steel. II : Determination of Cerium and Lanthanum in Iron and Steel
- Separation and Determination of Rare Earth Elements in Iron and Steel. I
- Studies of the Synthetic Inorganic Ion Exchanger. IV : The Separation of the Fission Product and Uranium by Means of a Stannic Phosphate Cation Exchanger
- Corrosion of Copper in Sulfuric Acid under γ-ray Irradiation
- Polarographic Studies of Some Metal Ions in Fused LiCl-KCl and NaF-KF-LiF Eutectics by Using Improved Molybdenum Microelectrode of Dipping Type
- Polarography of Some Metal Ions in Fused LiCl-KCl-AlCl_3 System with a Dropping Mercury Electrode
- Fluorescene Analysis. XIV : An application of Chromatography with Filter Paper
- Determination of Aluminium in Iron and Steel by Flame Photometry
- New Method for the Spectrophotometric Determination of Ultramicro Amounts of Copper
- Spectrophotometric Determination of Micro Amounts of Nitrogen with Organic Solvent Extraction : Application to Metallurgical Analysis
- Studies on Extraction and Determination of Metal Salts with Methyl Isobutyl Ketone. IX. : Photometric Determination of Iron and Cobalt in Electric Heating Alloys
- Studies on Extraction and Determination of Metal Salts with Methyl Isobutyl Ketone. VI : Photometric Determination of Microquantity of Cobalt and Iron in Metallic Nickel
- Studies on Extraction and Determination of Metal Salts with Methyl Isobutyl Ketone. V : Photometric Determination of Microquantity of Cobalt in Iron and Steel
- A New Spectrophotometric Determination of Titanium with Sodium Alizarinsulfonate
- Studies on the Extraction and Determination of Metal Salts with Methyl Isobutyl Ketone. XII : Spectrophotometric Determination of Thallium as Oxine Salt by Solvent Extraction
- Studies on the Extraction and Determination of Metal Salts with Methyl Isobutyl Ketone. XI : Extraction of Thallium
- Studies on Extraction and Determination of Metal Salts with Methyl Isobutyl Ketone. X. : Extraction of Gallium and Indium
- Determination of Nitrogen in Carbon and Alloy Steels by Carrier Gas Fusion-Thermal Conductivity Method
- Determination of Microquantities of Manganese in Iron, Steel and Some Non-Ferrous Metals by Extraction and Absorption Photometry
- Concurrent Determination of Magnesium and Calcium in Iron Ores by Atomic Absorption Spectroscopy
- Determination of Oxygen in Ferrosilicon by Argon-Carrier Fusion with Tin-Carbon Powder Bath
- Determination of Lanthanum by Flame Photometry
- Determination of Some Metals by X-Ray Fluorescence Apparatus. I : Determination of Copper and Silver in Aluminium Alloys
- Vacuum Emission Spectrometric Determination of Oxygen in Iron and Steel
- Interference of Aluminium in the Spectrometric Determination of Carbon in Steel with Vacuum Spectrometer
- Direct-Reading, Time-Resolving Technique in Emission Spectroscopy and its Application to the Analysis of Iron, Steel and Iron Ores
- Emission Spectrographic Determination of Carbon, Arsenic and Tin in Iron and Steel in Extreme-Ultraviolet Region
- Effect of Backing Metals in the X-Ray Fluorescence Spectral Analysis of Metal Films and its Application Absorption Edge Effect
- Stabilization of the Plasma-Jet Flame and Determination of Aluminium and Boron in Steel
- Emission Spectrographic Analysis of Metal Solid Samples with Plasma Jet Flame. I. : Application of Nitrogen Plasma Flame
- A Study of Atomic Absorption Spectrometry : Determination of Magnesium and Calcium in Slag and Cast Iron
- Fundamental Studies on Plasma-Jet Spectrometry
- Extraction-Spectrophotometric Determination of Ammonia by the Thymol-Chloramine-T Method : Application to Analysis of Steel
- A New Photometric Determination of Cerium With Methylene Blue
- Microdeterminations of Arsenic and Antimony in Metallic Germanium and Germanium Dioxide
- Simultaneous Determination of Lead and Zinc in Iron and Steel by Cathode Ray Polarographic Method
- Spectrometric Determination of Various Metals by High-Frequency Plasma Torch
- The Spectroscopic Observation of the Selective Volatilization of Metal Solid Samples in a Nitrogen Plasma Flame
- Electrolytic Determination of Lead in Iron and Steel
- Studies on Extraction and Determination of Metal Salts with Methyl Isobutyl Ketone. VIII. : Extraction of Iodides of Copper, Leas, Bismuth, Antimony, Cadmium, and Tellurium with Methyl Isobutyl Ketone
- Studies on the Determination of Arsenic. IX : Photometric Determination of Arsenic in Iron and Steel by Extraction with Organic Solvents
- Spectrophotometric Determination of Micro-amounts of Aluminium in Iron and Steel with Chrome Azurol S
- Studies on the Extraction and Determination of Metal Salts with Methyl Isobutyl Ketone. I : Extraction from Acid Solution
- Rapid Photometric Determination of Vanadium in Iron and Steel
- Photometric Determination of Tin in Iron and Steel. III : Photometric Determination of Tin with Sodium Diethyldithiocarbamate
- Photometric Determination of Microamount of Tellurium with Sodium Diethyldithiocarbamate and Its Application for the Analysis of Iron and Steel
- Extraction of Reduced Molybdosilicic Acid and Its Application to the Determination of Traces of Silicon
- Studies on Extraction and Determination of Metal Salts with Methyl Isobutyl Ketone. III : Extraction and Determination of Oxine Complex Salts of Some Metals
- Spectrophotometric Determination of Tantalum in Iron, Steel, and Niobium Metal
- A New Method for the Determination of Very Small Amount of Antimony in Various Kinds of Metals
- Colorimetric Determinations of Niobium and Tantalum
- Rapid Determinations of Micro-Quantity of Silicon in Steels
- Semimicro Determination of Beryllium in Copper-Beryllium Alloy
- Photometric Determination of Tin in Iron and Steel. I : Studies on Color Reaction of Stannous Salt with Cacotheline
- A New Photometric Determination of Antimony with Methylviolet
- A New Spectrophotometric Determination of Small Amounts of Titanium in Steel and Ferroalloys. I : Determination of Titanium in Steel and Cast Iron
- Determination of Tungsten in Iron and Steel. I : Investigations on the Perchloric Acid Method
- Determination of Manganese in Iron, Steel and Ferromanganese. II : Determination of Manganese in Ferromanganese
- Influence of Arsenic on the Analysis of Iron and Steel. I : The Determination of Sulfur and Phosphorus in Iron and Steel
- Influence of Arsenic on the Analysis of Iron and Steel. II : The Determination of Copper and Manganese in Iron and Steel
- Determination of Free Lime in Slag
- Determination of Manganese in Iron, Steel and Ferromanganese. I : Determination of Manganese in Iron and Steel
- Influences of Arsenic on the Analysis of Iron and Steel. III : Determination of Titanium and Molybdenum in Iron and Steel
- Studies on the Determination of Tellurium and Selenium. I : Determinations of Tellurium and Selenium in Presence of Perchloric Acid with Sulfur Dioxide
- Studies on the Determination of Selenium and Tellurium. III
- Photometric Determination of Tin in Iron and Steel II : Application of the Reaction of Tin and Cacotheline
- Polarographic Determination of Tin and Antimony in Iron and Steel
- Fluorescence Analysis XVI : On Redox Titrations by the Use of Tripaflavin as a Fluorescence Indicator
- Determination of Molybdenum in Iron and Steel with Vacuum Spectrometer
- Spectrometric Analysis of Nitrogen in Steel with D.C. Arc in the Vacuum Ultraviolet
- Studies on Flame Photometry by Organic Solvent Extraction Method. VI : Determination of Vanadium by Extraction of its Oxinate with Organic Solvents
- Spectrophotometric Determination of Microamount of Boron in Iron and Steel by Solvent Extraction
- X-Ray Fluorescence Analysis of Iron, Nickel, and Copper in Titanium- and Zirconium-Based Alloys by Aqueous Solution Method
- Emission Spectrographic Analysis by Low-Voltage Impulse Discharge. I. : The Effect of Atmosphere
- Determination of Hydrogen in Iron and Steel by the Argon Gas Carrier Hot-Extraction Method
- Vacuum Ultraviolet Spectroscopic Analysis of Nitrogen in Iron and Steel with Low-Voltage Condensed-Spark Discharge
- Simple Non-Destructive Analysis of Metals by Fluorescent X-Ray Spectroscopy
- Cathode Ray Polarographic Microdetermination of Cobalt in Nickel and of Nickel in Cobalt
- Determinatin of Hydrogen in Aluminium by the Argon-Carrier Hot Extraction Method
- High Frequency Titration of Some Metals with Potassium Chloride and Potassium Cyanide Solution
- Determination of Metals by Oxine Solution Using High Frequency Titration
- Enrichment Procedures for Small Quantities of Metals by Organometallic and Other Coprecipitation Techniques for X-Ray Fluorescence Analysis
- Studies on Flame Photometry by Organic Solvent Extraction Method. III : Determination of Manganese and Copper by Oxine-Organic Solvent Extraction Method
- Determination of Component in Binary Alloy by Backscattering of Beta Particles
- Studies on the Microdetermination of Metals by Extracting the Inorganic Compounds with Organic Solvents. III : Microdetermination of Molybdenum
- A New Microdetermination of Bismuth and Mercury by the Extraction of Their Iodides with Organic Solvent
- Studies on Flame Photometry by Organic Solvent Extraction Method. IV : Determination of Titanium, Gallium and Indium by Extraction of their Oxinates with Organic Solvent
- Studies on Flame Photometry by Organic Solvent Extraction Method. V : Determination of Nickel and Cobalt by Extraction of their Oxinate with Organic Solvent
- Rapid Determination of Small Amounts of Lead in Electrolytic Manganese and Ferromanganese
- Determination of Alloyed Elements in Special Steels by X-Ray Fluorescent Spectroscopy. III : Simultaneous Determination of Manganese and Chromium in Low Alloy Steels and Stainless Steels
- A New Method of Spectrophotometric Determination of Zinc with Alizarin Blue : Application to Estimation of Zinc in Tin and Lead
- Application of the Calibration (Absorption Parameter) : Method to X-Ray Fluorescent Analysis of Tin-Lead, Antimony-Lead, Tin-Antimony, and Tin-Antimony-Lead Alloy, and Analysis of Actual Samples
- Determination of Manganese in Ferromanganese and Chromium in Ferrochromium by X-Ray Fluorescent Spectroscopy