Effect of Inert Gas on Surface Film Formation and on Voltage Drop of Sliding Contacts(<Special Issue>Recent Development of Electro-Mechanical Devices (IS-EMD 2002))
スポンサーリンク
概要
- 論文の詳細を見る
Sliding contact behavior is important in the mechanism of collecting current. In this study, the effect of ambient gas including an inert gas on surface film formation and on the contact voltage drop was examined, changing the atmosphere from low pressure to atmospheric pressure. Furthermore, the sliding surface state was observed using SEM, EDX and XPS analyzers after the test operation. As a result, at the sliding contact in an inert gaseous environment (nitrogen and argon), it was confirmed that the contact voltage drop tends to increase. However, it was clarified that any chemically generated surface film is difficult to detect in the inert gas environment by qualitative analysis. On the basis of these results, we suggest the existence of physically adsorbed surface film. The relationship between inert gases and sliding contact phenomena is discussed.
- 社団法人電子情報通信学会の論文
- 2003-06-01
著者
-
SAWA Koichiro
Keio University
-
UENO Takahiro
Nippon Institute of Technology
-
MORITA Noboru
Nippon Institute of Technology
-
上野 高裕
Kyoto Pharmaceutical University
-
UENO Takahiro
Kyoto Pharmaceutical University
-
植田 知彦
京都薬科大学
-
UEMURA Toshiaki
Kyoto Pharmaceutical University
-
Ueno Takahiro
Nippon Inst. Technol. Saitama Jpn
-
Ueno Takahiro
Department Of Respiratory Diseases Institute Of Clinical Medicine University Of Tsukuba
-
Ueno T
Kyoto Pharmaceutical University
-
Ueno Takahiro
Graduate Course Of Mechanical Engineering Mie University
-
Sawa K
Nippon Institute Of Technology
-
Morita Noboru
Nippon Inst. Of Technol.
-
Ueno T
Nippon Institute Of Technology
-
Morita N
Faculty Of Engineering Nippon Institute Of Technology
-
Sawa Koichiro
Keio Univ. Yokohama‐shi Jpn
関連論文
- Degradation Phenomenon of Electrical Contacts by Hammering Oscillating Mechanism : Contact Resistance (VIII)
- Degradation Phenomenon of Electrical Contacts by Hammering Oscillating Mechanism : Modeling of the Oscillating Mechanism (VI)
- A Study on Wear of Brush and Carbon Flat Commutator of DC Motor for Automotive Fuel Pump
- Flashover and Transformer Voltage : Influence of Induced Voltage on DC Machine Flashover
- ABSOLUTE STEREOSTRUCTURES OF HOVENIDULCIOSIDES A_1 AND A_2,BIOACTIVE NOVEL TRITERPENE GLYCOSIDES FROM HOVENIAE SEMEN SEU FRUCTUS, THE SEEDS AND FRUIT OF HOVENIA DULCIS THUNB.
- Bioactive Saponins and Glycosides. IX. Notoginseng (2) : Structures of Five New Dammarane-Type Triterpene Oligoglycosides, Notoginsenosides-E, -G, -H, -I, and -J, and a Novel Acetylenic Fatty Acid Glycoside, Notoginsenic Acid β-Sophoroside, from the Dried
- Bioactive Saponins and Glycosides. VIII. Notoginseng (1) : New Dammarane-Type Triterpene Oligoglycosides, Notoginsenosides-A, -B, -C, and -D, from the Dried Root of Panax notoginseng (BURK.) F. H. CHEN
- Bioactive Saponins and Glycosides. I. Senegae Radix. (1) : E-Senegasaponins a and b and Z-Senegasaponins a and b, Their Inhibitory Effect on Alcohol Absorption and Hypoglycemic Activity
- E-SENEGASAPONINS A AND B, Z-SENEGASAPONINS A AND B, Z-SENEGINS II AND III, NEW TYPE INHIBITORS OF ETHANOL ABSORPTION IN RATS FROM SENEGAE RADIX, THE ROOTS OF POLYGALA SENEGA L. VAR LATIFOLIA TORREY ET GRAY
- 漢薬の生物活性成分(第3報)枳〓子(Hoveniae Semen Seu Fructus)のアルコール性筋弛緩抑制及び肝保護作用成分 : 新規Dihydroflavonol, Hovenitin I, II, III, の絶対構造
- Medicinal Foodstuffs. I. Hypoglycemic Constituents from a Garnish Foodstuff "Taranome, " the Young Shoot of Aralia elata SEEM. : Elatosides G, H, I, J, and K
- P-22 漢薬"枳〓子"のヒスタミン遊離抑制及びアルコール性筋弛緩抑制成分 : Methyl-migrated 16,17-seco-dammarane型トリテルペン配糖体hovenidulcioside類の化学構造(ポスター発表の部)
- Medicinal Foodstuffs. XVIII. Phytoestrogens from the Aerial Part of Petroselinum crispum MILL. (PARSLEY) and Structures of 6"-Acetylapiin and a New Monoterpene Glycoside, Petroside
- Chemical Constituents from the Leaves of Hydrangea macrophylla var. thunbergii(III) : Absolute Stereostructures of Hydramacrosides A and B, Secoiridoid Glucoside Complexes with Inhibitory Activity on Histamine Release
- Dihydroisocoumarin Constituents from the Leaves of Hydrangea macrophylla var. thunbergii (2). : Absolute Stereostructures of Hydrangenol, Thunberginol I, and Phyllodulcin Glycosides and Isomerization Reaction at the 3-Positions of Phyllodulcin and Its Gly
- Influence of Surface Finish Processing on Contact Voltage Drop of Sliding Contact(Session 2 -Sliding Contact-)
- The Relationship between Contact Resistance and Frictional Coefficient under High Current Sliding Contact(Session 2 -Sliding Contact-)
- A fritting like R-U characteristics and brush current sharing unbalance phenomena in steel collector ring for turbine generator
- Brush Sliding Contact Voltage Deviation Analysis based on the Evaluation of Displacement Excited Vibration caused by Collector Ring Profile Distortion : for Turbine Generators & Traction Motors(Session 2 -Sliding Contact-)
- Research of high reliability of noble metal slip-ring for supply of small electric power
- Research on Temperature Rise and Surface Deformation of Electrical Contacts by FEM
- Influence of Voltage on Arc Duration and Electrode Mass Change of AgNi Contacts for Electromagnetic Contactors
- A study of Degradation Phenomenon of Electrical Contacts by Hammering Oscillating Mechanism : modeling (10)
- Bioactive Saponins and Glycosides. II. Senegae Radix. (2) : Chemical Structures, Hypoglycemic Activity, and Ethanol Absorption-Inhibitory Effect of E-Senegasaponin c, Z-Senegasaponin c, and Z-Senegins II, III, and IV
- Effect of Atmosphere Change on Contact Voltage Drop at Sliding Contact
- A Relation between Commutator Erosion and Commutation Arc for DC Motor
- A Study on Wear of Carbon Flat Commutator and Brush of DC Motor for Automotive Fuel Pump
- Design of Microstrip Bandpass Filters Using SIRs with Even-Mode Harmonics Suppression for Cellular Systems
- A microstrip bandpass filter with ultra wide stopband using folded stepped-impedance resonators (マイクロ波)
- Effect of Inert Gas on Surface Film Formation and on Voltage Drop of Sliding Contacts(Recent Development of Electro-Mechanical Devices (IS-EMD 2002))
- An Effect of Inert Gas on Surface Film Formation and Voltage Drop of Sliding Contacts (国際セッションIS-EMD2002〔英文〕)
- Sampling of Ray-Space for Free Viewpoint Television (Computer Graphics/Vision I)(International Workshop On Advanced Image Technology (IWAIT2004))
- Interstitial Pneumonia Developed in a Worker Dealing with Particles Containing Indium-tin Oxide
- Testicular Toxicity Evaluation of Indium-Tin Oxide
- Pulmonary Toxicity of Indium-Tin Oxide and Indium Phosphide after Intratracheal Instillations into the Lung of Hamsters
- Development of the Lead-Free Brush Material for the High-Load Starter(Electromechanical Devices and Components)
- Development of the Lead-Free Carbon Brush Material for Starters(Automotive Application, IS-EMD2004-Recent Development of Electro-Mechanical Devices)
- Bioactive Saponins and Glycosides. IV. Four Methyl-Migrated 16,17-seco-Dammarane Triterpene Glycosides from Chinese Natural Medicine, Hoveniae Semen Seu Fructus, the Seeds and Fruit of Hovenia dulcis THUNB : Absolute Stereostructures and Inhibitory Activi
- ABSOLUTE STEREOSTRUCTURES OF HYDRAMACROSIDES A AND B, NEW BIOACTIVE SECOIRIDOID GLUCOSIDE COMPLEXES FROM THE LEAVES OF HYDRANGEA MACROPHYLLA SERINGE VAR. THUNBERGII MAKINO
- Effect of Inert Gas on Surface Film Formation and on Voltage Drop of Sliding Contacts
- Numerical Simulator for Estimation of Mechanical Function of Human Left Ventricle : Study of Basic System
- Influence of Surface Roughness on Contact Voltage Drop of Sliding Contacts (国際セッションIS--EMD 2003) -- (Session 3 Sliding contacts and connectors)
- Influence of Surface Roughness on Contact Voltage Drop of Sliding Contacts
- Relation between ambient temperature and contact voltage drop of sliding contacts(Session 7 : Contact Phenomena)
- An Investigation for the Method of Lifetime Prediction of Ag-Ni Contacts for Electromagnetic Contactor (国際セッションIS-EMD2005) -- (Contactors & Circuit Breakers)
- Fabrication Process of Nonarcing Power MEMS Switch(Relays and Switches, IS-EMD2004-Recent Development of Electro-Mechanical Devices)
- Fabrication process of non arcing power MEMS relay(Session 3 : Relays)
- Investigation for the flashover phenomenon in DC machines: sustainable voltage of DC arc (特集 回転機技術)
- An Influence of Atmospheric Humidity and Temperature on Brush Wear of Sliding Contact(Special Issue on Current Electromechanical Devices and Their Materials with Recent Innovations)
- Numerical Study on Electromagnetisms and Material Characteristics of Magnetic Flux Shield for Eddy-Current Type Proximity Sensor(Signal Transmission & Sensing,Recent Development of Electromechanical Devices (Selected Papers from ICEC2006)
- Characteristic Analysis and Enhancement of Sensing Property for Eddy-Current Type Proximity Sensor(Sensing Devices, IS-EMD2004-Recent Development of Electro-Mechanical Devices)
- Optimization of Magnetic Circuit Geometry for Eddy-current Type Proximity Sensor(Session 6 : Sensing Devices)
- Relationship between Contact Voltage Drop and Frictional Coefficient under High-current Sliding Contact
- Application of a Digital Scanning Laser Microscope to 3-D Analysis of Contact Surface Damages(Recent Development of Electro-Mechanical Devices (IS-EMD 2002))
- An experimental Study on operating characteristics of Ag, Pd and Cu contacts in argon atmosphere (国際セッションIS-EMD2002〔英文〕)
- A Study on Material Transfer and Erosion Characteristics of Ag, Pd and Cu Contacts in Nitrogen Atmospher
- Experimental Results on Operating Characteristics of Ag, Pd and Cu Contacts in Nitrogen Atmosphere(Special Issue on Current Electromechanical Devices and Their Materials with Recent Innovations)
- Characteristics of a sliding system with Au-plated slip-ring and AgPd brush for power supply(Session 7 : Contact Phenomena)
- Influence of Surface Finish Processing on Contact Voltage Drop in Cu/C Electrical Sliding Contacts
- Degradation phenomenon of electrical contacts by 3-D oscillating mechanism : Basal characteristic of 3-D oscillating mechanism
- Degradation phenomenon of electrical contacts by hammering oscillating mechanism : Relation to sliding contact mechanism(Session 5 -Material-)
- A study on influence of surrounding atmosphere to gaseous phase transition in break arc
- Arc and Contact Resistance Characteristics of Ag and Pd Contacts in Dielectric Liquids
- Commutation Phenomena of DC Motor in Ethanol Fuel
- A Study on Wear of Brush and Carbon Flat Commutator of DC Motor for Automotive Fuel Pump
- Research of high reliability of noble metal slip-ring for supply of small electric power
- Influence of Voltage on Arc Characteristics and Electrode Mass Change of AgNi Contacts for Electromagnetic Contactors
- Electrode Mass Change of AgNi Contacts for Electromagnetic Contactor : Influence of Voltage when only Break Arc is Generated
- Degradation Phenomenon of Electrical Contacts using a Micro-Sliding Mechanism : Minimal Sliding Amplitudes estimated under some conditions by the Mechanism (18)
- An experiment on carbon Commutator and Brush Wear by Arc Discharge
- In-situ Spectroscopic Ellipsometry of the Cu Deposition Process from Supercritical Fluids: Evidence of an Abnormal Surface Layer Formation
- Effect of Lubricant on Lifetime of Au-Plated Slip-Ring and Ag-Pd-Cu Brush System for Small Electric Power
- Degradation Phenomenon of Electrical Contacts using a Micro-Sliding Mechanism : Minimal Sliding Amplitudes estimated under some conditions by the Mechanism (18)
- Effect of Lubricant on Lifetime of Au-plated Slip-Ring and Ag-Pd-Cu Brush System for Small Electric Power-2-
- Arc Erosion of Carbon Contacts in Bio-fuels for Automobile
- Degradation phenomenon of electrical contacts using a hammering oscillating mechanism : A fundamental study on the performance of the oscillating mechanism (25)
- Effect of Lubricant on Lifetime of Au-Plated Slip-Ring and Ag-Pd-Cu Brush System for Small Electric Power