Effect of Simulated Welding Cycles on Carbide Evolution in SQV 2A Low Alloy Steel(Materials, Metallurgy & Weldability)
スポンサーリンク
概要
- 論文の詳細を見る
The influence of simulated welding cycles on the evolution of carbides in SQV-2A low alloy steel was studied. In the investigation TEM observations of thin foils and carbon extraction replicas were performed. Type and metal composition of carbide particles were determined by means of electron diffraction and EDX. In original and "affected" states Fe-rich M_3C and Mo-rich M_2C carbides were identified. The M_2C carbide was found to incur only small changes during simulated welding cycles. There was confirmed a higher sensitivity of M_3C carbide on short-term high-temperature welding processes.e
- 大阪大学の論文
著者
-
TAKAHASHI Makoto
Osaka University
-
IKEUCHI Kenji
Osaka University
-
KURODA Toshio
Osaka University
-
Ikeuchi K
Kyoto Univ. Kyoto Jpn
-
Ikeuchi K
大阪大学接合科学研究所
-
Kuroda T
Osaka University
-
Ikeuchi Kenji
Welding Research Institute Osaka University
-
TAKAHASHI Makoto
Joining and Welding Research Institute, Osaka University
-
JANOVEC Jozef
Osaka University
-
Janovec Jozef
Osaka University:inst. Of Mat. Res. Slovak Academy Of Sciences
-
Takahashi M
Joining And Welding Research Institute Osaka University
関連論文
- Spark-Sintered W Alloys Doped with LaB_6(Materials, Metallurgy & Weldability)
- Plasma Sintering of New Carbide Electrodes(Physics, Processes, Instruments & Measurements)
- Effects of Shielding Gas Composition on Metal Transfer Phenomena in High Current GMA Welding(Physics, Process, Instruments & Measurements)
- New Aspects of Sensitization Behavior in Recent 316 Type Austenitic Stainless SteelsAustenitic Stainless Steels(Materials, Metallurgy & Weldability)
- Disjunction of Metal/Glass Anodically-bonded Interface by Application of Reverse Voltage(Materials, Metallurgy & Weldability)
- Analysis of Electric Resistance of Diffusion-Welded Joint Based on Constriction Resistance(Materials, Metallurgy & Weldability)
- Degradation in Diffusion-welded Joint of Dissimilar-metal Combination at Elevated Temperatures(Materials, Metallurgy & Weldability)
- Effect of the Roughness of Faying Surface on the Early Process of Diffusion Welding : Fundamental Study of the Early Bonding Process of Diffusion Welding by Means of Electric Resistance Measurement (Report II)
- Effect of Oxide Film on the Early Process of Diffusion Welding : Fundamental Study of the Early Process of Diffusion Welding by Means of Electric Resistance Measurement (Report 1)
- Effect of the Roughness of Faying Surface on the Early Process of Diffusion Welding : Study of the Early Process of Diffusion Welding by Means of the Electric Resistance Measurement (Report II)(Materials, Metallurgy & Weldability)
- Decrease in the Efficiency of Diffusion-Welded Joint between Titanium and Aluminum in a Process of Use at High Temperatures
- Effect of Oxide Film on the Early Process of Diffusion Welding : Study of the Early Process of Diffusion Welding by Means of Electric Resistance Measurement (Report I)
- Diffusion Welding of Copper to Aluminum
- Effect of α⇆β Transformation on the Diffusion Welding of Titanium(Materials, Metallurgy, Weldability)
- Diffusion Welding of Copper to Aluminum(Materials, Metallurgy, Weldability)
- Stress Corrosion Cracking Susceptibilities of Carbon Steels in High Temperature and High Pressure Water(Materials, Metallurgy & Weldability)
- Investigation of Metallography and Behavior of M-A Constituent in Weld HAZ of HSLA Steels(Materials, Metallurgy & Weldability)
- Behavior of Oxide Film in Diffusion Bonding of Aluminum(Materials, Metallurgy & Weldability)
- Effects of Insert-metals on Diffusion Welding of Aluminum to Titanium
- Diffusion Welding of Aluminum to Titanium
- Friction Bonding of Ceramics to Metal with Intermediate Layer(Materials, Metallurgy & Weldability)
- Diffusion Welding of Ti-15%Mo-5%Zr Alloy to Mild Steel (0.06%C)
- Study of Microscopic Process of Diffusion Welding by Electric-Resistance Measurement and Transmission Electron Microscope
- Diffusion Welding of Molybdenum to Hastelloy Alloy X
- Effect of Relatively Insoluble Compounds on β Phase Precipitation in 5083 Aluminum Alloy
- Effect of Oxide Morphology on Bond Strength of Diffusion-Bonded Interfaces of Al-Alloys(Materials, Metallurgy & Weldability)
- Interfacial Oxide in Diffusion-Bonded Joints of Al-Binary Alloys by Transmission Electron Microscopy(Materials, Metallurgy & Weldability)
- Behavior of Interfacial Oxide during Diffusion Bonding of Aluminum Alloys and Its Influence on Joint Strength(Materials, Metallurgy & Weldability)
- Effect of Temper-bead Thermal Cycle on Toughness of Weld ICCGHAZ of Low Alloy Steel SQV-2A
- Review of Mechanical and Metallurgical Investigations of M-A Constituent in Welded Joint in Japan
- Effect of M-A Constituent on Fracture Behavior of 780 and 980MPa Class HSLA Steels Subjected to Weld HAZ Thermal Cycles(Materials, Metallurgy & Weldability)
- Weld HAZ Toughness and Its Improvement in Low Alloy Steel SQV-2A for Pressure Vessels (Report 3) : Toughness Improvement by PWHT(Materials, Metallurgy & Weldability)
- Weld HAZ Toughness and Its Improvement of Low Alloy Steel SQV-2A for Pressure Vessels (Report 2) : Microstructure and Charpy Impact Behavior of Intercritically Reheated Coarse Grained Heat Affected Zone (ICCGHAZ)(Materials, Metallurgy & Weldability)
- Weld HAZ Toughness and Its Improvement of Low Alloy Steel SQV-2A for Pressure Vessels (Report 1) : Effect of cooling time on microstructure and Charpy impact value in single thermal cycle(Materials, Metallurgy & Weldability)
- New Internal Friction Peak in Hydrogenated Palladium(Materials, Metallurgy & Weldability)
- Special Issue on Joining Technology for New Metallic Glasses and Inorganic Materials - Selected Papers from the IUMRS International Conference in Asia 2008 (IUMRS-ICA2008)
- Influence of Sigma Phase on Hydrogen Induced Cracking of Duplex Stainless Steel(Materials, Metallurgy & Weldability)
- Advanced Stereo Matching Algorithm for Three-dimensional Reconstruction of Fracture Surfaces(Physics, Processes, Instruments & Measurements)
- INTERNAL FRICTION PEAK BY HYDROGEN IN DUPLEX STAINLESS STEEL AND ITS WELD METAL
- Microstructure and Toughness in Weld Heat-Affected Zone of Duplex Stainless Steel(Materials, Metallurgy & Weldability)
- Fabrication of Surface-Hybrid-MMCs Layer on Aluminum Plate by Friction Stir Processing and Its Wear Characteristics
- Thermo-Mechanical-Metallurgical Model of Welded Steel : Part I : Evolution Equations for Internal Material Structures
- Stress Corrosion Cracking of SUS316 Stainless Steel in High Temperature Water(Materials, Metallurgy & Weldability)
- Stress Corrosion Cracking of SUS304 Stainless Steel in High Temperature Water : Effects of Solution Treatment Temperature and Sensitization Treatment(Materials, Metallurgy & Weldability)
- Stress Corrosion Cracking of SUS304 Stainless Steel in High Temperature Water : Effect of Dissolved Oxygen and Strain Rate(Materials, Metallurgy & Weldability)
- Friction-Stir-Welded Lap Joint of Aluminum to Zinc-Coated Steel
- Behavior of Superficial Oxide Film at Solid-State Diffusion-Bonded Interface of Tin
- Interfacial Layer in Friction-Bonded Joint of Low Carbon Steel to Al-Mg Alloy (AA5083) and its Influence on Bond Strength
- Microstructure of Aluminum/Copper Lap Joint by Friction Stir Welding and Its Performance
- 132 Application of Friction Stir Welding to Lap Joint of Aluminum to Steel
- Influence of Surface Treatment on the Strength of Solid-State Diffusion-Bonded Interface of Tin(Materials, Metallurgy & Weldability, INTERNATIONAL SYMPOSIUM OF JWRI 30TH ANNIVERSARY)
- Effects of Alloying Elements on the Strength of Friction-bonded Interfaces of Al Alloys to Steel(Materials, Metallurgy & Weldability, INTERNATIONAL SYMPOSIUM OF JWRI 30TH ANNIVERSARY)
- Impact Fracture Behavior of Duplex Stainless Steel Weldment(Materials, Metallurgy & Weldability, INTERNATIONAL SYMPOSIUM OF JWRI 30TH ANNIVERSARY)
- Microstructure and Mechanical Properties of Weld Metals of 950MPa Class High-strength Steel(Materials, Metallurgy & Weldability, INTERNATIONAL SYMPOSIUM OF JWRI 30TH ANNIVERSARY)
- Effect of Simulated Welding Cycles on Carbide Evolution in SQV 2A Low Alloy Steel(Materials, Metallurgy & Weldability)
- Three-Dimensional Reconstruction of Fracture Surface Using Area Matching Algorithm(Physics, Processes, Instruments & Measurements)
- Friction Bonding of Silicon Carbide to Oxygen-Free Copper with an Intermediate Layer of Reactive Metal
- Interfacial Reaction Layers in SiC/Cu Joint Friction-Bonded with Nb Intermediate Layer
- Interfacial Phenomena in Anodic Bonding of Glass to Kovar Alloy
- Analysis of Structural Features of Hard-Facing Overlays Performed Using Prototype Selfshielded Flux Cored Wires(Materials, Metallurgy & Weldability)
- Development of Intermediate Layer for Diffusion Bonding of Continuous Alumina Fiber Reinforced Aluminum Matrix Composite(Materials, Metallurgy & Weldability)
- Effects of Ultrasonic Vibration on Diffusion Welding of Aluminum(Materials, Metallurgy & Weldability)
- Diffusion Welding of Al-Cu-Mg Series A2017 Alloy to Titanium(Materials, Metallurgy & Weldability)
- Diffusion Bonding of Al-Mg-Si Series 6063 Alloy Reinforced with Alumina Short Fibers(Materials, Metallurgy & Weldability)
- Investigation of M-A Constituent in High Strength Steel Welds
- Microstructure in Weld Heat-affected Zone of Beta Titanium Alloy(Materials, Metallugy & Weldability)
- Mechanism of Enlargement of Intimately Contacted Area in Anodic Bonding of Kovar Alloy to Borosilicate Glass
- Corrosion Characteristics in Weld Heat-affected Zone of Al-Zn-Mg Alloy(Materials, Metallugy & Weldability)
- Microstructure and Toughness in Weld Metal of High Purity Ferritic Stainless Steel(Materials, Metallurgy & Weldability)
- Effect of Minor Alloying Elements on Corrosion Resistance of Al-Zn-Mg Alloy Welds(Materials, Metallurgy & Weldability)
- Friction Welding of Copper-Tungsten Sintered Alloy to Pure Aluminum : Formation of Intermetallic Compound at Weld (Report 1)
- Friction Welding Of Copper-Tungsten Sintered Alloy to Pure Titanium : Formation of Intermetallic Compound at Weld (Report 2)
- Friction Welding of Copper-Tungsten Sintered Alloy to Pure Aluminum : Formation of Intermetallic Compound at Weld (Report 1)
- Friction Welding of Oxygen Free Copper to Pure Aluminum
- Friction Welding of Silicon Carbide to Nickel with Intermediate Layer(Materials, Metallurgy & Weldability)
- ReibschweiBen von Kupfer-Sinterlegierung auf zahgepoltes Kupfer(Physics, Process, Instrument & Measurement)
- Effect of Copper Oxide on Joint Strength of Friction Welding of Copper-Tungsten Sintered Alloy to Tough Pitch Copper
- Effect of Microstructure on Hydride Precipitation in Ti-6A1-4V Alloy(Materials, Metallurgy & Weldability)
- Effects of Impurity in Aluminum on Diffusion Welding of Aluminum to Titanium(Materials, Metallurgy & Weldability)
- Lamellar Tearing of 5083 Aluminum Alloy and Its Welds(Materials, Metallurgy, Weldability)
- Effects of Relatively Insoluble Compounds and β Phase on Stress Corrosion Cracking in 5083 Aluminum Alloy(Materials, Metallurgy, Weldability)
- Microstructure and Mechanical Properties in Weld Heat Affected Zone of Titanium Alloy(Materials, Metallurgy & Weldability)
- Effect of Copper Addition on Corrosion Resistance of Commercial Al-Zn-Mg Alloy Welds(Materials, Metallurgy & Weldability)
- Analysis of Fracture Morphology in Hydrogen Embrittlement for Cr-Mo Steel(Materials, Metallurgy & Weldability)
- Effect of Hydride Precipitation Behavior on Fracture Morphology for Ti-6Al-4V Alloy(Materials, Metallurgy & Weldability)
- Stress Corrosion Cracking in Welds of Al-Zn-Mg System 7NO1-T4 Alloy(Materials, Metallurgy, Weldability)
- Hydride Precipitation Behavior in α+β Ti-6Al-4V Alloy(Materials, Metallurgy & Weldability)
- Microstructure in Weld Heat Affected Zone of Al-Mg-Si Alloy(MATERIALS METALLURGY AND WELDABILITY)
- Effect of Minor Alloy Additions on Aging Characteristics in Al-Zn-Mg Alloy Welds(Materials, Metallurgy & Weldability)
- Role of Secondary Austenite on Corrosion and Stress Corrosion Cracking of Sensitized Duplex Stainless Steel Weldments(Materials, Metallurgy & Weldability)
- Helium Bubble Kinetics during Laser Welding of Helium-Doped Stainless Steel(Materials, Metallurgy & Weldability)
- Diffusion Welding of Al-Cu-Mg Series 2017 Alloy(Materials, Metallurgy & Weldability)
- Effect of Nickel Content on the Microstructure and Mechanical Properties of Weld Metal for 980MPa Class High-strength Steel
- Microstructure of Aluminum/Copper Lap Joint by Friction Stir Welding and Its Performance
- What's Brought by Micro- and Nanoscopic Approaches to Joining & Welding Metallurgy?(Materials, Metallurgy & Weldability, INTERNATIONAL SYMPOSIUM OF JWRI 30TH ANNIVERSARY)
- Development of Microstructure of the Anodically-bonded Interface between Aluminum and Borosilicate Glass(Materials, Metallurgy & Weldability, INTERNATIONAL SYMPOSIUM OF JWRI 30TH ANNIVERSARY)