Friction Welding Of Copper-Tungsten Sintered Alloy to Pure Titanium : Formation of Intermetallic Compound at Weld (Report 2)
スポンサーリンク
概要
- 論文の詳細を見る
- 社団法人溶接学会の論文
- 1992-10-01
著者
-
Matsuda F
Osaka Univ. Jpn
-
Ikeuchi K
Kyoto Univ. Kyoto Jpn
-
Ikeuchi K
大阪大学接合科学研究所
-
Enjo Toshio
Welding Research Institute Osaka University
-
Enjo Toshio
Welding Research Institute Of Osaka Univ.
-
Ando Masaaki
Akita National College Of Technology
-
Ikeuchi Kenji
Welding Research Institute Osaka University
-
TOMITA Tomoki
Hyogo Prefectural Institute of Industrial Research
-
ARITOSHI Masatoshi
Hyogo Prefectural Institute of Industrial Research
-
Okita Kozo
Hyogo Prefectural Institute Of Industrial Research
-
Okita Kozo
Institute Of Industrial Research Osaka Sangyo University
-
Aritoshi M
Hyogo Prefectural Institute Of Technology
-
Matsuda Fukuhisa
Welding Research Inst. Osaka Univ.
-
Matsuda Fukuhisa
Welding Department Faculty Of Engineering Osaka University
関連論文
- Spark-Sintered W Alloys Doped with LaB_6(Materials, Metallurgy & Weldability)
- Plasma Sintering of New Carbide Electrodes(Physics, Processes, Instruments & Measurements)
- Effects of Shielding Gas Composition on Metal Transfer Phenomena in High Current GMA Welding(Physics, Process, Instruments & Measurements)
- Contraction Process and RRC Test of Nodular Graphite Cast Iron Weldments : Studies on the Weld Cracking of Nodular Graphite Cast Iron (Report 5)
- Preheating Effect on the Critical Rupture Stress of Nodular Graphite Cast Iron Welds : Study on the Weld Cracking of Nodular Graphite Cast Iron (Report 2)
- Estimation of Cracking Susceptibility of Nodular Graphite Cast Iron by the Implant Test : Study on the Weld Cracking of Nodular Graphite Cast Iron (Report 1)
- New Aspects of Sensitization Behavior in Recent 316 Type Austenitic Stainless SteelsAustenitic Stainless Steels(Materials, Metallurgy & Weldability)
- Fundamental Investigations on Solidification Crack Susceptibility for Weld Metals with Trans-Varestraint Test
- Weld Metal Cracking and Improvements of 25%Cr-20%Ni (AISI 310S) Fully Austenitic Stainless Steel
- Effect of Grain Morphology on Consumption of GTA Electrode(Physics, Process, Instruments & Measurements)
- Temperature and Work Function Measurements with Different GTA Electrodes
- Roles and Behaviors of Rare Earth Metal Oxides During the Operation of Tungsten Doped Electrodes
- Gas-Tungsten-Electrode (Report 4) : Measurement of Cathode Temperature(Physics, Process, Instrument & Measurement)
- Gas-Tungsten-Electrode (Report 5) : Effect of Combined Additives of Rare Earth Metal Oxides on Arc Characteristics of Tungsten Electrode(Physics, Process, Instrument & Measurement)
- Behavior of Rare Earth Metal Oxides during Arcing(Physics, Process, Instrument & Measurement)
- Direct Observation of Cathode Surface : Gas-Tungsten-Arc Electrode (3)(Physics, Process, Instrument & Measurement)
- Oxidation Behaviour and Rim Formation Mechanism of Tungsten Electrode(Physics, Process, Instrument & Measurement)
- Gas-Tungsten-Arc Cathode and Related Phenomena
- Effect of Additional Element on Weld Solidification Crack Susceptibility of Al-Zn-Mg Alloy (Report I) : Results of Ring Casting Cracking Test(Materials, Metallurgy & Weldability)
- Assessment of Solidification Cracking Test for Aluminum Alloy Welds(MATERIALS METALLURGY AND WELDABILITY)
- Effect of the Third Alloying Elements on Surface Hardening of Ni-7wt%Ti and Ni-20wt%Cr Binary Alloys by PIN Process : Studies on Surface Modification of Nonferrous Metals by means of Plasma Ion Nitriding (PIN) Process (Report 5)
- Microstructure and Hardening Mechanism of Nitrided Ni Binary Alloys : Studies on Surface Modification of Nonferrous Metals by means of Plasma Ion Nitriding (PIN) Process (Report 4)
- Effect of Transformation Expansion on Restraint Stress of Weldment in Relation to Cold Cracking of High Strength Steels(Materials, Metallurgy & Weldability)
- Effects of Nitrogen and Molybdenum on Weld Solidification Crack Susceptibility : Weld Crack Susceptibility of Duplex Stainless Steel (Report VI)
- Numerical Analysis on Solidification Brittleness Temperature Range in Stainless Steel : Weld Crack Susceptibility of Duplex Stainless Steel (Report V)
- Nurnerical Analysis on Microsegregation during Weld Solidification : Weld Crack Susceptibility of Duplex Stainless Steel (Report IV)
- Weld Cracking in Duplex Stainless Steel (Report III) : Numerical Analysis on Solidification Brittleness Temperature Range in Stainless Steel(Materials, Metallurgy & Weldability)
- Weld Cracking in Duplex Stainless Steel (Report II) : Modelling of Cellular Dendritic Growth during Weld Solidification(Materials, Metallurgy & Weldability)
- Weld Cracking in Duplex Stainless Steel (Report I) : Aspects of Solidification Sequence Revealed by Quenching(Materials, Metallurgy & Weldability)
- Measurements of Carbon Content in M-A Constituent in HAZ of High Strength Steel Welds
- Investigation of Metallography and Behavior of M-A Constituent in Weld HAZ of HSLA Steels(Materials, Metallurgy & Weldability)
- Microstructural Development in Friction Welded AZ31 Magnesium Alloy
- Nitrogen Content of 316L Weld Metal and Its Fine Particle by Means of High-pressure MIG Arc Welding
- Some Metallurgical Investigations on Electron-beam Welds
- Friction Bonding of Ceramics to Metal with Intermediate Layer(Materials, Metallurgy & Weldability)
- Effect of Oxide Morphology on Bond Strength of Diffusion-Bonded Interfaces of Al-Alloys(Materials, Metallurgy & Weldability)
- Interfacial Oxide in Diffusion-Bonded Joints of Al-Binary Alloys by Transmission Electron Microscopy(Materials, Metallurgy & Weldability)
- Behavior of Interfacial Oxide during Diffusion Bonding of Aluminum Alloys and Its Influence on Joint Strength(Materials, Metallurgy & Weldability)
- Toughness Characteristics and Its Improvement of Electroslag Weld Metal of Structural Steel Plate
- Effect of Temper-bead Thermal Cycle on Toughness of Weld ICCGHAZ of Low Alloy Steel SQV-2A
- Review of Mechanical and Metallurgical Investigations of M-A Constituent in Welded Joint in Japan
- Effect of M-A Constituent on Fracture Behavior of 780 and 980MPa Class HSLA Steels Subjected to Weld HAZ Thermal Cycles(Materials, Metallurgy & Weldability)
- Weld HAZ Toughness and Its Improvement in Low Alloy Steel SQV-2A for Pressure Vessels (Report 3) : Toughness Improvement by PWHT(Materials, Metallurgy & Weldability)
- Weld HAZ Toughness and Its Improvement of Low Alloy Steel SQV-2A for Pressure Vessels (Report 2) : Microstructure and Charpy Impact Behavior of Intercritically Reheated Coarse Grained Heat Affected Zone (ICCGHAZ)(Materials, Metallurgy & Weldability)
- Weld HAZ Toughness and Its Improvement of Low Alloy Steel SQV-2A for Pressure Vessels (Report 1) : Effect of cooling time on microstructure and Charpy impact value in single thermal cycle(Materials, Metallurgy & Weldability)
- Metallurgical and Mechanical Properties of High Nitrogen Austenitic Stainless Steel Friction Welds
- Mechanical Properties of High Nitrogen-Bearing Stainless Steel Friction Welds(Materials, Metallurgy & Weldability)
- Study of Anodic Phenomena for Arc Plasma(Physics, Process, Instrument & Measurement)
- Influence of Sigma Phase on Hydrogen Induced Cracking of Duplex Stainless Steel(Materials, Metallurgy & Weldability)
- Advanced Stereo Matching Algorithm for Three-dimensional Reconstruction of Fracture Surfaces(Physics, Processes, Instruments & Measurements)
- Effect of Microstructure on Fracture Toughness of SUS329J1 Duplex Stainless Steel Welds
- Microstructure and Toughness in Weld Heat-Affected Zone of Duplex Stainless Steel(Materials, Metallurgy & Weldability)
- Fabrication of Surface-Hybrid-MMCs Layer on Aluminum Plate by Friction Stir Processing and Its Wear Characteristics
- Oxygen Content and Fracture Toughness of MIG Weld Metal of SUS304 Steel
- Liquid Phase Diffusion Welding of Nickel-Base Superalloy Using Ni-B System Alloyed Layer Formed on Bonding Surface with Sputtering
- Study on Liquid Phase Diffusion Welding of Nickel Base Superalloy Used Ni-B System Alloyed Layer Formed on Bonding Surface with Sputtering
- Stress Corrosion Cracking of SUS316 Stainless Steel in High Temperature Water(Materials, Metallurgy & Weldability)
- Stress Corrosion Cracking of SUS304 Stainless Steel in High Temperature Water : Effects of Solution Treatment Temperature and Sensitization Treatment(Materials, Metallurgy & Weldability)
- Stress Corrosion Cracking of SUS304 Stainless Steel in High Temperature Water : Effect of Dissolved Oxygen and Strain Rate(Materials, Metallurgy & Weldability)
- Friction-Stir-Welded Lap Joint of Aluminum to Zinc-Coated Steel
- Behavior of Superficial Oxide Film at Solid-State Diffusion-Bonded Interface of Tin
- Interfacial Layer in Friction-Bonded Joint of Low Carbon Steel to Al-Mg Alloy (AA5083) and its Influence on Bond Strength
- Microstructure of Aluminum/Copper Lap Joint by Friction Stir Welding and Its Performance
- 132 Application of Friction Stir Welding to Lap Joint of Aluminum to Steel
- Influence of Surface Treatment on the Strength of Solid-State Diffusion-Bonded Interface of Tin(Materials, Metallurgy & Weldability, INTERNATIONAL SYMPOSIUM OF JWRI 30TH ANNIVERSARY)
- Effects of Alloying Elements on the Strength of Friction-bonded Interfaces of Al Alloys to Steel(Materials, Metallurgy & Weldability, INTERNATIONAL SYMPOSIUM OF JWRI 30TH ANNIVERSARY)
- Impact Fracture Behavior of Duplex Stainless Steel Weldment(Materials, Metallurgy & Weldability, INTERNATIONAL SYMPOSIUM OF JWRI 30TH ANNIVERSARY)
- Microstructure and Mechanical Properties of Weld Metals of 950MPa Class High-strength Steel(Materials, Metallurgy & Weldability, INTERNATIONAL SYMPOSIUM OF JWRI 30TH ANNIVERSARY)
- Effect of Simulated Welding Cycles on Carbide Evolution in SQV 2A Low Alloy Steel(Materials, Metallurgy & Weldability)
- Three-Dimensional Reconstruction of Fracture Surface Using Area Matching Algorithm(Physics, Processes, Instruments & Measurements)
- Friction Bonding of Silicon Carbide to Oxygen-Free Copper with an Intermediate Layer of Reactive Metal
- Interfacial Reaction Layers in SiC/Cu Joint Friction-Bonded with Nb Intermediate Layer
- Interfacial Phenomena in Anodic Bonding of Glass to Kovar Alloy
- Investigation of M-A Constituent in High Strength Steel Welds
- Mechanism of Enlargement of Intimately Contacted Area in Anodic Bonding of Kovar Alloy to Borosilicate Glass
- Corrosion Characteristics in Weld Heat-affected Zone of Al-Zn-Mg Alloy(Materials, Metallugy & Weldability)
- Microstructure and Toughness in Weld Metal of High Purity Ferritic Stainless Steel(Materials, Metallurgy & Weldability)
- Effect of Minor Alloying Elements on Corrosion Resistance of Al-Zn-Mg Alloy Welds(Materials, Metallurgy & Weldability)
- Friction Welding of Copper-Tungsten Sintered Alloy to Pure Aluminum : Formation of Intermetallic Compound at Weld (Report 1)
- Friction Welding Of Copper-Tungsten Sintered Alloy to Pure Titanium : Formation of Intermetallic Compound at Weld (Report 2)
- Friction Welding of Copper-Tungsten Sintered Alloy to Pure Aluminum : Formation of Intermetallic Compound at Weld (Report 1)
- Friction Welding of Oxygen Free Copper to Pure Aluminum
- Friction Welding of Silicon Carbide to Nickel with Intermediate Layer(Materials, Metallurgy & Weldability)
- ReibschweiBen von Kupfer-Sinterlegierung auf zahgepoltes Kupfer(Physics, Process, Instrument & Measurement)
- Effect of Copper Oxide on Joint Strength of Friction Welding of Copper-Tungsten Sintered Alloy to Tough Pitch Copper
- Effect of Nitorogen Content on the Low Temperature Mechanical Properties of Type 304 Austenitic Staninless Steel Weld Metals(Materials, Metallurgy & Weldability)
- Influence of Microstructure in the Heat-Affected Zone on the Reheat Cracking Susceptibility of Cr-Mo steel
- Influence of Microstructure in the Heat-Affected-Zone on the Reheat Cracking Susceptibility
- Cr_3C_2-Ni-Cr coating properties of HVOF-YAG hybrid spraying and its strengthening mechanism(Physics, Processes, Instruments & Measurements)
- Effect of Simultaneous Laser Irradiation on a Cr_3C_2-Ni-Cr Coating Produced by High-Velocity Oxy-Fuel Spraying Process
- Effect of Sulphur on Solidification Cracking in Weld Metal of Steel (Report 6) : Weld Solidification Crack Susceptibility of High Tensile Low Nickel Alloy Steel
- Effect of Sulphur on Solidification Cracking in Weld Metal of Steel (Report 5) : Sulphide and Solidification Crack Susceptibility in Fe-S-Mn-Ni and Fe-S-Mn-C Quarternary Alloy Steels
- Effect of Sulphur on Solidification Cracking in Weld Metal of Steel (Report 2) : Theoretical Investigation on Change in Liquid Composition among Primary Crystals during Weld Solidification and on New Parameter Replacing Mn/S in Fe-S-Mn Alloy Steel
- Effect of Sulphur on Solidification Cracking in Weld Metal of Steel (Report 3) : Applicability of New Parameter Mn^3/S to Weld Metal of Fe-S-Mn Alloy Steel
- Effect of Sulphur on Solidification Cracking in Weld Metal of Steel (Report 4) : Theoretical and Experimental Iuvestigations on Solidification Crack Subceptibility of Low Carbon Steel Weld Metal
- Effect of Sulphur on Solidification Cracking in Weld Metal of Steel (Report 1) : Fundamental Investigation on Sulphides in Fe-S Binary Alloy Steel
- A14 Machining Error Compensation Utilizing On-the-machine Measurement of machined surface(Digital design and digital manufacturing (CAD/CAM))
- Effect of Nickel Content on the Microstructure and Mechanical Properties of Weld Metal for 980MPa Class High-strength Steel
- Microstructure of Aluminum/Copper Lap Joint by Friction Stir Welding and Its Performance
- Small-scale friction welding of similar and dissimilar stainless steels