予混合圧縮着火燃焼に適した噴霧形成に関する研究 : 対向噴霧の特性解析(熱工学,内燃機関,動力など)

概要

論文の詳細を見る
Premixed lean diesel combustion (PREDIC) achieves very low NO_x emissions as a result of early fuel injection. Another consequence of such early injection is an increase in the amount of fuel spray reaching the cylinder wall. This results in higher fuel consumption and THC emissions. Another shortfall is that compression ignition timing control is difficult because of its dependence upon the incylinder temperature. These problems can be addressed by utilizing an impingement spray, with two nozzles. In this study, this type of spray was analyzed on spray position control, larger spray volume, and less wall wetting, among others. Also, the impingement spray structure was analyzed by cross-sectional observation using laser induced fluorescence. Spray penetration, high-density area, and plume area were measured. The impinging sprays enhance each other's spreading and mixture formation. Higher injection pressure has little effect on spray penetration and high-density area.
一般社団法人日本機械学会の論文
2002-06-25