On Tooth Contact Marking and Gear Performance : 1st Report, Fundamental Characteristics of Tooth Contact Marking

スポンサーリンク

概要

• 論文の詳細を見る

• A calculating method of tooth contact marking of involute helical gears is shown with the following results: 1) When the shape of composite gear error surface of a pair of involute helical gears is mathematically similar and the ratio between amplitude and the transmitting load is kept constant, the pattern of tooth contact marking does not change and the state of tooth loading distribution is similar. 2) When a pattern of tooth contact marking is the same, the ratio of stress increase owing to gear error is almost the same. Some restricting conditions for these two theorems are indicated. Measured and calculated tooth contact markings and tooth fillet stresses of gears which have concave tooth form error and simultaneous longitudinal crowning of tooth trace correction verify the propriety of these two theorems.

• 一般社団法人日本機械学会の論文

著者

• Kubo Aizoh

  Fac.of Engng. Kyoto Univ.

• Nakanishi Tsutomu

  Fac. Of Pharmaceutical Sciences Setsunan Univ.

• Nakanishi T

  Miyazaki Univ. Miyazaki Jpn

• JIN Jingli

  Shenyan Inst. of Technology

• UENO Taku

  Fac.of Engng., Kyushu Indust., Univ.

• ARIURA Yasutsune

  Fac. of Engng., Kyushu Univ.

• Ueno Taku

  Faculty Of Engineering Kyushu Sangyo University

• Ariura Y

  Kyushu Univ. Fukuoka Jpn

• Taku Ueno

  Fac. Of Engng. Kyushu Indust. Univ.

• Arlura Yasutsune

  Fac. Of Engng. Kyushu Univ.

関連論文

• Tannins and Related Polyphenols,HIV Reverse Transcriptase Inhibitors, from Rosa woodsii
• Flavonol Glycosides in Leaves of Two Diospyros Species
• Potentiation of Nerve Growth Factor-Induced Neurite Outgrowth in PC12 Cells by a Coptidis Rhizoma Extract and Protoberberine Alkaloids(Biochemistry & Molecular Biology)
• A Monoterpene Glucoside and Three Megastigmane Glycosides from Juniperus communis var. depressa
• Inhibitory Effect of Plant Extracts on Production of Verotoxin by Enterohemorrhagic Escherichia coli 0157 : H7.
• Inhibitory Effect of Plant Extracts on Production of Verotoxin by Enterohemorrhagic Escherichia coil O157 : H7
• Triterpenes and Flavonol Glucuronides from Oenothera cheiranthifolia
• Phytochemical Study on American Plants I. Two New Phenol Glucosides, together with Known Biflavones and Diterpene, from Leaves of Juniperus occidentalis HOOK.
• A New and Known Cytotoxic Aryltetralin-Type Lignans from Stems of Bursera graveolens
• A Cytological Analysis of 24 Taxa in Aristolochia Subgenera Siphisia and Aristolochia (Aristolochiaceae)
• Three New Furoquinoline Alkaloids from the Leaves of Boninia glabra
• Cancer Chemopreventive Activity of 2-(2, 3, 6-Trihydroxy-4-carboxyphenyl) ellagic Acid from the Fruits of Casealpinia ferrea
• A New Eudesmane Sesquiterpene from the Twigs of Aglaia grandis
• Antibacterial Activity of Extracts Prepared from Tropical and Subtropical Plants on Methicillin-Resistant Staphylococcus aureus
• Diamide Derivatives and Cycloartanes from the Leaves of Aglaia elliptica
• Constituents of a Fern, Diplazium subsinuatum. III. Four New Hopane-Triterpene Lactone Glycosides
• Inhibitory Effects of Bufadienolides on Epstein-Barr Virus Early Antigen Activation and on Growth of Mouse Skin and Mouse Pulmonary Tumors
• Constituents of a Fern, Diplazium subsinuatum. II. Structure Elucidation of Five New Hopane-Triterpene Glycosides
• Manufacture and Performance of Cylindrical Gears : An Application of New Finish-Hobs for Increasing Surface Durability
• Load-Carrying Capacity of HB≃340 (Hardened and Tempered) Gears : Influence of Gear Ratio and Surface Roughness on Surface Durability
• Load-Carrying Capacity of Surface-Hardened Gears : Influence of Surface Roughness on Surface Durability : Vibration, Control Engineering, Engineering for Industry
• Manufacture and Performance of Spheroidal Graphite Cast lron Gears : 2nd Report, Load-carrying Capacities of As-cast FCD 70〜80 Gears
• On Tooth Contact Marking and Gear Performance : 2nd Report, Gears with Harmful Tooth Form
• On Tooth Contact Marking and Gear Performance : 1st Report, Fundamental Characteristics of Tooth Contact Marking
• Manufacturing and Performance of Spheroidal Graphite Cast lron Gear : 1st Report, An Application to Medium-hardness Gears
• Effects of Tooth Form on Stresses in Helical Gears : 1st Report, Effects of Convex and Concave Tooth Profiles
• Load-carrying Capacity of the HB〓340 (Hardened and Tempered) Gears : 4th Report, Effect of Surface-finishing on Surface Durability
• Load-carrying Capacity of the HB〓340 (Hardened and Tempered) Gears : 3rd Report, Influences of Difference in Hardness and Roughness on Surface Drability
• Load-carrying Capacity of the HB〓340 (Hardened and Tempered) Gears : 2nd Report, Surface Durabilities of the Leaded Free-cutting Steel Hobbed Gears and Honed Gears
• Load-carrying Capacity of the HB〓340 (Hardened and Tempered) Gears : 1st Report, Effect of Surface Roughness on the Rolling Contact Fatigue of the Rollers and Surface Durability of the Habbed Gears
• New Neolignan and Phenylpropanoid Glycosides in Juniperus communis var. depressa
• Molecular Phylogeny of Aristolochia (Aristolochiaceae) Inferred from matK Sequences
• Screening of Anti-HIV-1 Activity of North American Plants. Anti-HIV-1 Activities of P1ant Extracts,and Active Components of Lethalia vulpina(50)Hue
• Tooth Surface Configurations Caused by the Errors in Hobs and Hobbing Machines
• Finish Hobbing of Gears with Accurate Tooth Profiles
• An Improvement of the Tooth Profile Accuracy of a Hobbed Gear by Adjusting the Hob Eccentricity
• Improvement of Gear Accuracy in Gear Hobbing : 2nd Report, Investigation of the Causes of Tooth Profile Errors by Comparing Computed Tooth Profile Errors with Measured Ones : Vibration, Control Engineering, Engineering for Industry
• Improvement of Gear Accuracy in Gear Hobbing : 1st Report, A Numerical Analysis of Tooth Profile Errors : Vibration, Control Engineering, Engineering for Industry
• On the Lubrication of Worm Gears
• Fundamental Research on Hobbed Gear-tooth Surface Roughness : Influence of the Built-up Edge
• Research on Soluble Cutting Fluids for Gear Cutting : 2nd Report, The Influence of Dilution Ratio and the Effect of Synthetic Fluids
• Research on Soluble Cutting Fluids for Gear Cutting : 1st Report, The Effect of Components of Soluble Fluids and the Range of Application of the Fluids
• Experiments on the Cooling Ability of Cutting Fluids
• Effects of Inclination of Contact Line on Friction and Wear of Worm Gears
• The Lubricant Churning Loss in Spur Gear Systems
• Isolation of Apoptosis- and Differentiation-Inducing Substances toward Human Promyelocytic Leukemia HL-60 Cells from Leaves of Juniperus taxifolia
• Fundamental Research on the Hobbing of Austempered Spheroidal Graphite Cast Iron : On the Most Suitable Clearance Angle of the Hob
• Fundamental Research on the Hobbing of Austempered Spheroidal Graphite Cast Iron : Cutting Tests Using High Speed Steel Fly-Tools
• Analysis of Effect of Built-Up Edge on Hobbed Gear Tooth Surface Roughness
• A Study of Gear Hobbing : Chiefly on Cutting Hard Gears
• STUDIES ON THE WEAR OF HOB : Influence of Face Roughness of Tooth upon Tool Wear
• RESEARCH ON THE TAPERED HOBS
• Graphic Analysis of Hobbing in Unfinished Space
• Studies on the Internal Gear Hobs : Hobs working like the broach and their cutting test
• On Ideal Shapes of the Relieved Surface of Hob Tooth
• The Lubrication of Bevel Gears
• Study on the Cutting Forces for Spiral Bevel Gears
• Analyses of Cutting Conditions of Spiral Bevel Gears
• Load Carrying Capacity of Spur Gears : A New Gear-Load Testing Machine and Running-in and Failure of Gears Having a Lengthwise Tooth Error

もっと見る 閉じる

スポンサーリンク