Research on Soluble Cutting Fluids for Gear Cutting : 1st Report, The Effect of Components of Soluble Fluids and the Range of Application of the Fluids
スポンサーリンク
概要
- 論文の詳細を見る
Fundamental research was made on the effect of the components of the soluble cutting fluids and on the range of application of the fluids for the purpose of developing soluble cutting fluids which have cutting ability close or superior to that of cutting oils. The follwing results were mainly obtained : there are some soluble cutting fluids which decrease the damage of cutting tools more than the cutting oil at a high speed of l59m/min ; among the testing fluids containing rape-seed oil, chlorinated paraffin and sulfurized fatty oil respectively, the fluid, 40% of which consists of sulfurized fatty oil, gave the best performance in the wear on cutting tool and in the roughness of finished surface.
- 一般社団法人日本機械学会の論文
著者
-
Katsuki Akira
Faculty Of Engineering Oita University
-
Katsuki Akira
Faculty Of Engineering Kyushu University
-
UENO Taku
Faculty of Engineering, Kyushu Industrial University
-
Ueno Taku
Faculty Of Engineering Kyushu Sangyo University
-
MATSUOKA Hironori
Faculty of Engineering, Oita University
-
KOHARA Masao
Technical Department, Yushira Chemical Industry Co., Ltd.
-
Kohara Masao
Technical Department Yushira Chemical Industry Co. Ltd.
-
Matsuoka Hironori
Faculty Of Engineering Oita University
-
UENO Taku
Faculty of Engineering, Kyushu University
関連論文
- Manufacture and Performance of Cylindrical Gears : An Application of New Finish-Hobs for Increasing Surface Durability
- Load-Carrying Capacity of HB≃340 (Hardened and Tempered) Gears : Influence of Gear Ratio and Surface Roughness on Surface Durability
- Load-Carrying Capacity of Surface-Hardened Gears : Influence of Surface Roughness on Surface Durability : Vibration, Control Engineering, Engineering for Industry
- Manufacture and Performance of Spheroidal Graphite Cast lron Gears : 2nd Report, Load-carrying Capacities of As-cast FCD 70〜80 Gears
- On Tooth Contact Marking and Gear Performance : 2nd Report, Gears with Harmful Tooth Form
- On Tooth Contact Marking and Gear Performance : 1st Report, Fundamental Characteristics of Tooth Contact Marking
- Manufacturing and Performance of Spheroidal Graphite Cast lron Gear : 1st Report, An Application to Medium-hardness Gears
- Effects of Tooth Form on Stresses in Helical Gears : 1st Report, Effects of Convex and Concave Tooth Profiles
- Load-carrying Capacity of the HB〓340 (Hardened and Tempered) Gears : 4th Report, Effect of Surface-finishing on Surface Durability
- Load-carrying Capacity of the HB〓340 (Hardened and Tempered) Gears : 3rd Report, Influences of Difference in Hardness and Roughness on Surface Drability
- Load-carrying Capacity of the HB〓340 (Hardened and Tempered) Gears : 2nd Report, Surface Durabilities of the Leaded Free-cutting Steel Hobbed Gears and Honed Gears
- Load-carrying Capacity of the HB〓340 (Hardened and Tempered) Gears : 1st Report, Effect of Surface Roughness on the Rolling Contact Fatigue of the Rollers and Surface Durability of the Habbed Gears
- Tooth Surface Configurations Caused by the Errors in Hobs and Hobbing Machines
- On the Lubrication of Worm Gears
- Fundamental Research on Hobbed Gear-tooth Surface Roughness : Influence of the Built-up Edge
- Research on Soluble Cutting Fluids for Gear Cutting : 2nd Report, The Influence of Dilution Ratio and the Effect of Synthetic Fluids
- Research on Soluble Cutting Fluids for Gear Cutting : 1st Report, The Effect of Components of Soluble Fluids and the Range of Application of the Fluids
- Experiments on the Cooling Ability of Cutting Fluids
- Effects of Inclination of Contact Line on Friction and Wear of Worm Gears
- The Lubricant Churning Loss in Spur Gear Systems
- Fundamental Research on the Hobbing of Austempered Spheroidal Graphite Cast Iron : On the Most Suitable Clearance Angle of the Hob
- Fundamental Research on the Hobbing of Austempered Spheroidal Graphite Cast Iron : Cutting Tests Using High Speed Steel Fly-Tools
- Studies on Grooving Wear of High-Speed-Steel Cutting Tools : (Mechanism of Grooving Wear and Its Prevention)
- Research on a New Additive for Preventing Hob Failure Caused by Water in Cutting Oil
- Analysis of Effect of Built-Up Edge on Hobbed Gear Tooth Surface Roughness
- A Study of Gear Hobbing : Chiefly on Cutting Hard Gears
- STUDIES ON THE WEAR OF HOB : Influence of Face Roughness of Tooth upon Tool Wear
- RESEARCH ON THE TAPERED HOBS
- Graphic Analysis of Hobbing in Unfinished Space
- Studies on the Internal Gear Hobs : Hobs working like the broach and their cutting test
- On Ideal Shapes of the Relieved Surface of Hob Tooth
- The Lubrication of Bevel Gears
- Study on the Cutting Forces for Spiral Bevel Gears
- Analyses of Cutting Conditions of Spiral Bevel Gears
- Load Carrying Capacity of Spur Gears : A New Gear-Load Testing Machine and Running-in and Failure of Gears Having a Lengthwise Tooth Error