STUDIES ON THE WEAR OF HOB : Influence of Face Roughness of Tooth upon Tool Wear
スポンサーリンク
概要
- 論文の詳細を見る
In the machining of metals, it has been believed that the smoother the rake and the flank face on tooth are, the smaller the tool wear is and the longer the tool life is. Therefore such tools as hobs, demanding high accuracy, are ground carefully. But the degree and the cause of the influence which the face roughness of tooth has upon tool wear are not made clear completely. In this paper, relations between the hob tooth roughness and the tooth wear are made sufficiently clear concerning the degree and the cause of the influence, through many fundamental cutting tests.
- 一般社団法人日本機械学会の論文
著者
-
Ueno Taku
Faculty Of Engineering Kyushu Sangyo University
-
Hidaka Kazunori
Sasebo Technical College
-
Hidaka Kazunori
Sasebo College Of Technology
-
NAKAE Masahiko
Sasebo Technical College
-
Nakae Masahiko
Sasebo College Of Technology
関連論文
- Manufacture and Performance of Cylindrical Gears : An Application of New Finish-Hobs for Increasing Surface Durability
- Load-Carrying Capacity of HB≃340 (Hardened and Tempered) Gears : Influence of Gear Ratio and Surface Roughness on Surface Durability
- Load-Carrying Capacity of Surface-Hardened Gears : Influence of Surface Roughness on Surface Durability : Vibration, Control Engineering, Engineering for Industry
- Manufacture and Performance of Spheroidal Graphite Cast lron Gears : 2nd Report, Load-carrying Capacities of As-cast FCD 70〜80 Gears
- On Tooth Contact Marking and Gear Performance : 2nd Report, Gears with Harmful Tooth Form
- On Tooth Contact Marking and Gear Performance : 1st Report, Fundamental Characteristics of Tooth Contact Marking
- Manufacturing and Performance of Spheroidal Graphite Cast lron Gear : 1st Report, An Application to Medium-hardness Gears
- Effects of Tooth Form on Stresses in Helical Gears : 1st Report, Effects of Convex and Concave Tooth Profiles
- Load-carrying Capacity of the HB〓340 (Hardened and Tempered) Gears : 4th Report, Effect of Surface-finishing on Surface Durability
- Load-carrying Capacity of the HB〓340 (Hardened and Tempered) Gears : 3rd Report, Influences of Difference in Hardness and Roughness on Surface Drability
- Load-carrying Capacity of the HB〓340 (Hardened and Tempered) Gears : 2nd Report, Surface Durabilities of the Leaded Free-cutting Steel Hobbed Gears and Honed Gears
- Load-carrying Capacity of the HB〓340 (Hardened and Tempered) Gears : 1st Report, Effect of Surface Roughness on the Rolling Contact Fatigue of the Rollers and Surface Durability of the Habbed Gears
- Tooth Surface Configurations Caused by the Errors in Hobs and Hobbing Machines
- On the Lubrication of Worm Gears
- Fundamental Research on Hobbed Gear-tooth Surface Roughness : Influence of the Built-up Edge
- Research on Soluble Cutting Fluids for Gear Cutting : 2nd Report, The Influence of Dilution Ratio and the Effect of Synthetic Fluids
- Research on Soluble Cutting Fluids for Gear Cutting : 1st Report, The Effect of Components of Soluble Fluids and the Range of Application of the Fluids
- Experiments on the Cooling Ability of Cutting Fluids
- Effects of Inclination of Contact Line on Friction and Wear of Worm Gears
- The Lubricant Churning Loss in Spur Gear Systems
- Fundamental Research on the Hobbing of Austempered Spheroidal Graphite Cast Iron : On the Most Suitable Clearance Angle of the Hob
- Fundamental Research on the Hobbing of Austempered Spheroidal Graphite Cast Iron : Cutting Tests Using High Speed Steel Fly-Tools
- Analysis of Effect of Built-Up Edge on Hobbed Gear Tooth Surface Roughness
- A Study of Gear Hobbing : Chiefly on Cutting Hard Gears
- STUDIES ON THE WEAR OF HOB : Influence of Face Roughness of Tooth upon Tool Wear
- RESEARCH ON THE TAPERED HOBS
- Graphic Analysis of Hobbing in Unfinished Space
- Research on CBN Finishing Hob : Turning and Fly Tool Cutting Tests
- Studies on the Internal Gear Hobs : Hobs working like the broach and their cutting test
- On Ideal Shapes of the Relieved Surface of Hob Tooth
- The Lubrication of Bevel Gears
- Study on the Cutting Forces for Spiral Bevel Gears
- Analyses of Cutting Conditions of Spiral Bevel Gears
- Load Carrying Capacity of Spur Gears : A New Gear-Load Testing Machine and Running-in and Failure of Gears Having a Lengthwise Tooth Error