Studies on the Internal Gear Hobs : Hobs working like the broach and their cutting test
スポンサーリンク
概要
- 論文の詳細を見る
Before this paper, it is pointed out that the barrel shaped hob for generating the internal gears is difficult to make with theoretical exactness, and the conception of using a cylindrical forming hob instead of the generating one is reported. This forming hob has a tooth helix wound once and is made very easily. From the cutting test with the above hob made on trial, a new excellent hob is developed. Present paper describes the designing and manufacturing method of the new hob, the results of cutting test and the instructions for its practical use. This hob has the broach-like teeth wound twice along the helix, and can be made by almost the same technique as the one used in the manufacture of the ordinary hob. An accurate internal gear can be continuously cut with this hob, which will be especially suitable for large internal gear production.
- 一般社団法人日本機械学会の論文
著者
-
Sakamoto Masafumi
Kyushu Institute Of Technology
-
Ueno Taku
Faculty Of Engineering Kyushu Sangyo University
-
Terashima Kenichi
Mechanical Engineering Department Sasebo Technical College
関連論文
- Manufacture and Performance of Cylindrical Gears : An Application of New Finish-Hobs for Increasing Surface Durability
- Load-Carrying Capacity of HB≃340 (Hardened and Tempered) Gears : Influence of Gear Ratio and Surface Roughness on Surface Durability
- Load-Carrying Capacity of Surface-Hardened Gears : Influence of Surface Roughness on Surface Durability : Vibration, Control Engineering, Engineering for Industry
- Manufacture and Performance of Spheroidal Graphite Cast lron Gears : 2nd Report, Load-carrying Capacities of As-cast FCD 70〜80 Gears
- On Tooth Contact Marking and Gear Performance : 2nd Report, Gears with Harmful Tooth Form
- On Tooth Contact Marking and Gear Performance : 1st Report, Fundamental Characteristics of Tooth Contact Marking
- Manufacturing and Performance of Spheroidal Graphite Cast lron Gear : 1st Report, An Application to Medium-hardness Gears
- Effects of Tooth Form on Stresses in Helical Gears : 1st Report, Effects of Convex and Concave Tooth Profiles
- Load-carrying Capacity of the HB〓340 (Hardened and Tempered) Gears : 4th Report, Effect of Surface-finishing on Surface Durability
- Load-carrying Capacity of the HB〓340 (Hardened and Tempered) Gears : 3rd Report, Influences of Difference in Hardness and Roughness on Surface Drability
- Load-carrying Capacity of the HB〓340 (Hardened and Tempered) Gears : 2nd Report, Surface Durabilities of the Leaded Free-cutting Steel Hobbed Gears and Honed Gears
- Load-carrying Capacity of the HB〓340 (Hardened and Tempered) Gears : 1st Report, Effect of Surface Roughness on the Rolling Contact Fatigue of the Rollers and Surface Durability of the Habbed Gears
- Tooth Surface Configurations Caused by the Errors in Hobs and Hobbing Machines
- On the Lubrication of Worm Gears
- Fundamental Research on Hobbed Gear-tooth Surface Roughness : Influence of the Built-up Edge
- Research on Soluble Cutting Fluids for Gear Cutting : 2nd Report, The Influence of Dilution Ratio and the Effect of Synthetic Fluids
- Research on Soluble Cutting Fluids for Gear Cutting : 1st Report, The Effect of Components of Soluble Fluids and the Range of Application of the Fluids
- Experiments on the Cooling Ability of Cutting Fluids
- Effects of Inclination of Contact Line on Friction and Wear of Worm Gears
- The Lubricant Churning Loss in Spur Gear Systems
- Fundamental Research on the Hobbing of Austempered Spheroidal Graphite Cast Iron : On the Most Suitable Clearance Angle of the Hob
- Fundamental Research on the Hobbing of Austempered Spheroidal Graphite Cast Iron : Cutting Tests Using High Speed Steel Fly-Tools
- Analysis of Effect of Built-Up Edge on Hobbed Gear Tooth Surface Roughness
- A Study on the Surface Durability of Grease Lubrication Gears (The Relation between Various Lubricants and Temperatures in Helical Gears) : Series C : Vibration, Control Engineering, Engineering for Industry
- A Study of Gear Hobbing : Chiefly on Cutting Hard Gears
- STUDIES ON THE WEAR OF HOB : Influence of Face Roughness of Tooth upon Tool Wear
- RESEARCH ON THE TAPERED HOBS
- Graphic Analysis of Hobbing in Unfinished Space
- Improvement of an Automatic Internal Gear Pitch Tester with a Microcomputer-Aided Interactive Centering Function : Series C : Vibration Control Engineering Engineering for Industry
- Studies on the Internal Gear Hobs : Hobs working like the broach and their cutting test
- On Ideal Shapes of the Relieved Surface of Hob Tooth
- A Study on the Surface Durability of Grease Lubrication Gears (The Lubricant Stirring Loss and Its Behavior in a Gear Box) : Series C : Vibration, Control Engineering, Engineering for Industry
- The Lubrication of Bevel Gears
- Study on the Cutting Forces for Spiral Bevel Gears
- Analyses of Cutting Conditions of Spiral Bevel Gears
- Load Carrying Capacity of Spur Gears : A New Gear-Load Testing Machine and Running-in and Failure of Gears Having a Lengthwise Tooth Error