RESEARCH ON THE TAPERED HOBS
スポンサーリンク
概要
- 論文の詳細を見る
The hobs are theoretically reconsidered on their peripheral taper and their rough cutting mechanism. The taper angle under a fixed length of hob varies according to the helix angle of gear and the setting angle and the cutting feed direction of hob. A method of determining the optimum taper shape is described on a calculation example. Additionally, in order to relieve the cutting load concentrated on the side edge of end tooth, a new type side taper hob, whose tooth thickness is gradually reduced in the rough cutting teeth, is proposed. Design example is given and satisfactory result is obtained in a hobbing with the trial hob.
- 一般社団法人日本機械学会の論文
著者
-
Ueno Taku
Faculty Of Engineering Kyushu Sangyo University
-
Terashima Kenichi
Faculty Of Engineering Nagasaki University
-
Hidaka Kazunori
Sasebo College Of Technology
-
UENO Taku
Faculty of Engineering, Kyushu University
関連論文
- Manufacture and Performance of Cylindrical Gears : An Application of New Finish-Hobs for Increasing Surface Durability
- Load-Carrying Capacity of HB≃340 (Hardened and Tempered) Gears : Influence of Gear Ratio and Surface Roughness on Surface Durability
- Load-Carrying Capacity of Surface-Hardened Gears : Influence of Surface Roughness on Surface Durability : Vibration, Control Engineering, Engineering for Industry
- Manufacture and Performance of Spheroidal Graphite Cast lron Gears : 2nd Report, Load-carrying Capacities of As-cast FCD 70〜80 Gears
- On Tooth Contact Marking and Gear Performance : 2nd Report, Gears with Harmful Tooth Form
- On Tooth Contact Marking and Gear Performance : 1st Report, Fundamental Characteristics of Tooth Contact Marking
- Manufacturing and Performance of Spheroidal Graphite Cast lron Gear : 1st Report, An Application to Medium-hardness Gears
- Effects of Tooth Form on Stresses in Helical Gears : 1st Report, Effects of Convex and Concave Tooth Profiles
- Load-carrying Capacity of the HB〓340 (Hardened and Tempered) Gears : 4th Report, Effect of Surface-finishing on Surface Durability
- Load-carrying Capacity of the HB〓340 (Hardened and Tempered) Gears : 3rd Report, Influences of Difference in Hardness and Roughness on Surface Drability
- Load-carrying Capacity of the HB〓340 (Hardened and Tempered) Gears : 2nd Report, Surface Durabilities of the Leaded Free-cutting Steel Hobbed Gears and Honed Gears
- Load-carrying Capacity of the HB〓340 (Hardened and Tempered) Gears : 1st Report, Effect of Surface Roughness on the Rolling Contact Fatigue of the Rollers and Surface Durability of the Habbed Gears
- Tooth Surface Configurations Caused by the Errors in Hobs and Hobbing Machines
- On the Lubrication of Worm Gears
- Fundamental Research on Hobbed Gear-tooth Surface Roughness : Influence of the Built-up Edge
- Research on Soluble Cutting Fluids for Gear Cutting : 2nd Report, The Influence of Dilution Ratio and the Effect of Synthetic Fluids
- Research on Soluble Cutting Fluids for Gear Cutting : 1st Report, The Effect of Components of Soluble Fluids and the Range of Application of the Fluids
- Experiments on the Cooling Ability of Cutting Fluids
- Effects of Inclination of Contact Line on Friction and Wear of Worm Gears
- The Lubricant Churning Loss in Spur Gear Systems
- Fundamental Research on the Hobbing of Austempered Spheroidal Graphite Cast Iron : On the Most Suitable Clearance Angle of the Hob
- Fundamental Research on the Hobbing of Austempered Spheroidal Graphite Cast Iron : Cutting Tests Using High Speed Steel Fly-Tools
- Analysis of Effect of Built-Up Edge on Hobbed Gear Tooth Surface Roughness
- A Study of Gear Hobbing : Chiefly on Cutting Hard Gears
- STUDIES ON THE WEAR OF HOB : Influence of Face Roughness of Tooth upon Tool Wear
- RESEARCH ON THE TAPERED HOBS
- Graphic Analysis of Hobbing in Unfinished Space
- Research on CBN Finishing Hob : Turning and Fly Tool Cutting Tests
- Studies on the Internal Gear Hobs : Hobs working like the broach and their cutting test
- DEVELOPMENT OF PLASTIC GEARS FOR POWER TRANSMISSION : Power Transmission Mechanism of Plastic Gears
- On Ideal Shapes of the Relieved Surface of Hob Tooth
- The Lubrication of Bevel Gears
- Study on the Cutting Forces for Spiral Bevel Gears
- Analyses of Cutting Conditions of Spiral Bevel Gears
- Load Carrying Capacity of Spur Gears : A New Gear-Load Testing Machine and Running-in and Failure of Gears Having a Lengthwise Tooth Error