Recovery of Calcium from BF Slag and Synthesis of Zeolite A Using Its Residue
スポンサーリンク
概要
- 論文の詳細を見る
The elution and recovery of Ca from blast furnace slag and the alkali hydrothermal synthesis of zeolite A using the residue from the elution treatment were investigated using a ball-milling-type reaction vessel. The superior elution was obtained by using citric and formic acid solutions from which Ca could be selectively eluted from the slag. Whereas hydrochloric acid solution and ion-exchanged water were ineffective for Ca elution. Ca ions eluted in the solution were recovered as calcium formate by evaporation of water. From the formic acid eluted slag residue after three elution treatment cycles of the slag for 7.2 ks, zeolite A was synthesized in 1 mol/L NaOH solution with a reaction time of 86.3 ks at 343 K, without the addition of any other materials.
- 社団法人 日本鉄鋼協会の論文
- 2011-06-15
著者
-
成島 尚之
Department Of Materials Processing Tohoku University
-
井口 〓孝
Department Of Materials Processing Tohoku University
-
井口 泰孝
東北大学大学院工学研究科
-
Murakami Taichi
Institute of Multidisciplinary Research for Advanced Materials, Tohoku University
-
Ouchi C
Department Of Materials Processing Tohoku University
-
Ouchi Chiaki
Tohoku University
-
Murakami Taichi
Department Of Materials Processing Tohoku University
-
Murakami Taichi
Department Of Chemistry And Materials Science Tokyo Institute Of Technology
-
Narushima Takayuki
Department Of Materials Processing Graduate School Of Engineering Tohoku University
-
Sugano Yoshiyuki
Department Of Metallurgy Faculty Of Engineering Tohoku University
-
Ouchi Chiaki
Department Of Metallurgy Tohoku University
-
Ouchi Chiaki
Department Of Materials Processing Graduate School Of Engineering Tohoku University
-
SUGANO Yoshiyuki
Tohoku University. Now at JFE Steel Corp.
-
IGUCHI Yasutaka
Tohoku University
関連論文
- Apatite formation behavior on bio-ceramic films prepared by MOCVD
- Precipitation Behavior in a Hanks' Solution on Ca-P-O Films Prepared by Laser CVD
- Hydroxyapatite Formation on Ca-P-O Coating Prepared by MOCVD
- MOCVD法によるCa-Ti-OおよびCa-P-O系傾斜機能バイオセラミックス膜の合成
- ブラスト処理を施したTi-6Al-4V合金基板へのリン酸カルシウムコーティングと生体内外評価
- Hydroxyapatite Formation on CaTiO_3 Film Prepared by Metal-Organic Chemical Vapor Deposition
- Evaluation of Calcium Phosphate Coating Films on Titanium Fabricated Using RF Magnetron Sputtering
- S111 CVD法により合成したCa-P-O膜の骨形成に及ぼす微細組織の影響(力学適応能,自己組織化能を有するバイオマテリアル-生体インターフェイスの創製,SP1:シンポジウム1)
- S109 ブラスト処理Ti-6Al-4V基板へのリン酸カルシウムコーティングと生体内外評価(力学適応能,自己組織化能を有するバイオマテリアル-生体インターフェイスの創製,SP1:シンポジウム1)
- 110 高融点金属と溶鉄の混合熱測定(製鋼基礎・脱酸, 製鋼, 日本鉄鋼協会 第 95 回(春季)講演大会)
- 182 高融点金属と溶鉄の混合熱測定(熱力学・反応速度・脱炭, 製鋼, 日本鉄鋼協会第 92 回(秋季)講演大会)
- Surface Hardening Treatment for Titanium Materials Using Ar-5%CO Gas in Combination with Post Heat Treatment under Vacuum
- ラマン分光法による CaO-MeO-SiO_2, MnO-SiO_2 および FeO-SiO_2 系スラグの構造研究
- 高炉スラグ中のガスの挙動
- ラマン分光法による珪酸塩スラグの構造解析
- 高温熱量計による鉄合金の混合熱の測定 : Fe-Cr, Fe-Mo, Fe-W, Fe-V, Fe-Nb, Fe-Ta
- 高温熱量計による鉄合金の混合熱の測定
- 108 ラマン分光法による MnO-SiO_2, FeO-SiO_2 および CaO-MeO-SiO_2 系スラグの構造研究(精錬基礎, 製鋼, 日本鉄鋼協会 第 101 回(春季)講演大会)
- 56 高炉スラグ中のガス成分の定量(製銑スラグ・製銑基礎 (II), 製銑, 日本鉄鋼協会 第 100 回(秋季)講演大会)
- 166 ラマン分光法による珪酸塩スラグの構造研究(製鋼基礎・造塊, 製鋼, 日本鉄鋼協会 第 98 回(秋季)講演大会)
- チタン上への多層リン酸カルシウムコーティング膜の作製とその評価
- P20.PMA誘導したTHP-1細胞(マクロファージ)によるチタン微小粉の貪食の評価(一般演題抄録,第5回日本再生歯科学会)
- 東北大学工学部金属物理化学講座・研究紹介
- セルモデルによる溶融スラグのハイドロオキシルキャパシティーの定式化
- 溶融アルミネート中への水蒸気の溶解
- CO_2ガスを利用したチタンおよびチタン合金の表面硬化処理(加工・加工熱処理)
- TiB及びY_2O_3分散粒子による粉末冶金チタン合金のβ粒微細化
- Boron and Nitrogen in GaAs and InP Melts Equilibrated with B_2O_3 Flux
- Behavior of Oxygen in Ga-As Melts with the Range of As Content up to 5 mass % Equilibrated with B_2O_3 Flux
- Activity of Ga_2O_3 in B_2O_3 Flux and Standard Free Energies of Formation of CaBO_3 and InBO_3
- 111 溶融スラグを介したガス相からの溶鉄への水素移行(製鋼基礎・脱酸, 製鋼, 日本鉄鋼協会 第 95 回(春季)講演大会)
- 134 スラグを通しての溶鉄への水素の溶解(反応速度・物性, 製鋼, 日本鉄鋼協会第 90 回(秋季)講演大会)
- J0401-2-3 チタン基板上に作製したリン酸カルシウムコーティング膜評価(生体材料およびその表面改質材(2))
- 溶融 Fe_tO-SiO_2 系スラグの生成熱測定
- Dynamic and Static Restoration Behaviors of Pure Lead and Tin in the Ambient Temperature Range
- Viscoelastic behavior of commercially available tissue conditioners under compression
- The Effect of Solute Elements on Hardness and Grain Size in Platinum Based Binary Alloys
- Development of a New Method for Manufacturing Iron Foam Using Gases Generated by Reduction of Iron Oxide
- Hydrothermal Synthesis of Zeolite A Using Blast Furnace Slag
- ラマン分光法を用いた高温酸化皮膜の"その場"観察装置の開発
- 真空後熱処理を組み合わせたAr-5%COガスを利用したチタン材料の表面硬化処理法
- チタン合金のβ粒微細化及び粒成長挙動に及ぼすY_2O_3分散粒子の影響
- 極微量のイットリウム添加α+β型チタン合金のβ粒成長に及ぼす加熱温度・時間の影響
- 鉄鋼スラグ及び結晶性Al_2O_3を原料としたゼオライトAのアルカリ水熱合成
- 鋳造低合金鋼での動的再結晶後のγ粒成長挙動に及ぼす微量元素の影響
- 動的再結晶による鋼の凝固オーステナイト粒の微細化及び粒成長挙動
- 析出粒子及び動的再結晶による凝固オーステナイト粒径の微細化
- 溶鉄のバリウムによる脱酸平衡
- 技術経営における知的財産戦略 : 企業資産としての知的財産を活用した経営戦略の重要性
- 情報化社会に伴う特許法のパラダイム・シフトと情報保護法としての新たな制度設計
- 発明概念の研究 (特集 大学における知的財産の研究)
- 高温熱量計によるニッケルおよびコバルト合金の混合熱測定
- 連続鋳造による9%Ni鋼のミクロ偏析に及ぼすオーステナイトでの動的再結晶の影響
- Fatigue Behaviors of Ultra Fine Wires of β-Type and α-Type Titanium Alloys
- Oxidation or Nitridation Behavior of Pure Chromium and Chromium Alloys Containing 10mass%Ni or Fe in Atmospheric Heating
- Alloy Design and Property Evaluation of New β Type Titanium Alloy with Excellent Cold Workability and Biocompatibility
- Preparation of Calcium Phosphate Films by Radiofrequency Magnetron Sputtering
- Grain Refinement of As Cast Austenite by Dynamic Recrystallization in HSLA Steels
- Solubilities and Equilibrium Distribution Coefficients of Oxygen and Carbon in Silicon
- 鉄鋼スラグを原料としたぜオライト類のアルカリ水熱合成
- 生体用チタンおよびチタン合金 (特集 金属系バイオマテリアルの研究開発・最前線)
- Hardness and Composition of Solution-Treated Ag-Pd-Cu-Au Alloy Microstructures
- 溶融 CaO-SiO_2-MgO, CaO-SiO_2-TiO_2 系スラグにおける水蒸気溶解度および溶解速度
- TEM/EDX Observation of Micro-beads of Magnetically Activated Cell Sorting (MACS) System and Separation Trial of Mouse Mesenchymal Stem Cells from Bone Marrow Cells by MACS System
- Effect of pH and Addition of Salt on the Adsorption Behavior of Lysozyme on Gold, Silica, and Titania Surfaces Observed by Quartz Crystal Microbalance with Dissipation Monitoring
- Gene Expression Analyses of Human Mesenchymal Stem Cells Cultured in Osteogenic Differentiation Medium for 3, 7, 14 and 21 Days by Genome Focus DNA Microarray and Real-time PCR
- New Index for the Stability of a Type I Collagen Affected by Hydrophobic Environment
- Preparation of Highly Pore-interconnected Porous Collagen Sponges using Chloroform and Ammonia
- Accumulation of Element Ti in Macrophage-like RAW264 Cells Cultured in Medium with 1 ppm Ti and Effects on Cell Viability, SOD Production and TNF-α Secretion
- DNA Microarray Analyses of Gene Expression in Human Mesenchymal Stem Cells Cultured in Osteogenic Differentiation Medium for 14 days
- Fatigue Properties of Stainless Steel Wire Ropes for Electrodes in Functional Electrical Stimulation Systems
- 純酸素による溶融 Fe-Ni, Fe-Cr 合金の酸化速度
- 212 純酸素による溶融鉄-クロム, 鉄-ニッケル合金の酸化速度(反応速度・攪拌・混合・転炉・転炉スラグ, 製鋼, 日本鉄鋼協会 第 102 回(秋季)講演大会)
- P-61 PIXE法による細胞培養液とチタンイオン貪食マクロファージRAW264の元素分析(細胞,一般講演(ポスター発表),第47回日本歯科理工学会学術講演会・総会)
- チタンイオンがマクロファージ様細胞RAW264の細胞生存率に及ぼす影響評価(毒性, 平成17年度秋期 (長崎) 第46回日本歯科理工学会学術講演会)
- 米国技術移転サイクルの提案と検証
- 産学連携Forum(第3回)米国大学TLOの技術移転発展モデルの提案と検証
- 1A10 米国技術移転発展モデルの提案とその検証(産学連携, 第20回年次学術大会講演要旨集I)
- 大学から見たベンチャー起業の必要性と将来展望
- 米国の大学における技術移転に関する研究
- 超微細組織を有する生体用新α+β型チタン合金の熱処理特性
- 133 溶融鉄および鉄-クロム合金の脱窒速度(インジェクション基礎, 反応速度, 製銑・製鋼共通, 日本鉄鋼協会第 109 回講演大会)
- Alloy Design and Properties of New α+β Titanium Alloy with Excellent Cold Workability, Superplasticity and Cytocompatibility
- Evaluation of Sliding Wear Resistant Property of C. P. Titanium and SP-700 Titanium Alloy Surface-hardened by Ar-5%CO Gas
- Variations in the Microstructure and Hardness with Solution Treating and Aging Conditions in New α+β Titanium Alloy Ti-4.5%Al-6%Nb-2%Fe-2%Mo
- β Grain Refinement due to Small Amounts of Yttrium Addition in α+β Type Titanium Alloy, SP-700
- ライム系物質の水和反応
- Austenitic Grain Growth behavior Immediately after Dynamic Recrystallization in HSLA Steels and Austenitic Stainless Steel
- Effect of HEMA Adsorption on the Stability of Native and Denatured Type I Tendon Collagen
- 討 6 還元性ガスによる溶融酸化鉄の還元反応速度(I 鉄鉱石類の高温における還元・溶融機構, 第 107 回 講演大会討論会講演概要)
- 溶解熱熱量計による製鋼スラグの水和熱測定
- S0201-1-2 熱酸化プロセスを利用したチタン上へのアナターゼ皮膜形成と骨適合性評価(骨再生と骨再建のためのバイオマテリアル(1),社会変革を技術で廻す機械工学)
- Alkali Hydrothermal Synthesis of Zeolite A Using Oxide By-products
- Oxidation of Boron Carbide-Silicon Carbide Composite at 1073 to 1773K
- Oxidation of Boron Carbide-Silicon Carbide Composite at 1073 to 1773K
- Proteome analyses of human macrophages exposed to low cytotoxic IC90 copper (2+) ions
- Recovery of Calcium from BF Slag and Synthesis of Zeolite A Using Its Residue
- Biomechanical Evaluation of Amorphous Calcium Phosphate Coated TNTZ Implants Prepared Using a Radiofrequency Magnetron Sputtering System
- 生体材料としてのチタンおよびチタン合金
- チタン, チタン合金